Sets our main struct and passes it to the parent class
Creates a new pixbuf loader object that always attempts to parse image data as if it were an image of type image_type or mime_type, instead of identifying the type automatically. Useful if you want an error if the image isn't the expected type, for loading image formats that can't be reliably identified by looking at the data, or if the user manually forces a specific type.
Creates a new pixbuf loader object.
This signal is emitted when the pixbuf loader has allocated the pixbuf in the desired size. After this signal is emitted, applications can call gdk_pixbuf_loader_get_pixbuf() to fetch the partially-loaded pixbuf.
This signal is emitted when a significant area of the image being loaded has been updated. Normally it means that a complete scanline has been read in, but it could be a different area as well. Applications can use this signal to know when to repaint areas of an image that is being loaded.
This signal is emitted when gdk_pixbuf_loader_close() is called. It can be used by different parts of an application to receive notification when an image loader is closed by the code that drives it.
This signal is emitted when the pixbuf loader has been fed the initial amount of data that is required to figure out the size of the image that it will create. Applications can call gdk_pixbuf_loader_set_size() in response to this signal to set the desired size to which the image should be scaled. See Also gdk_pixbuf_new_from_file(), gdk_pixbuf_animation_new_from_file()
Informs a pixbuf loader that no further writes with gdk_pixbuf_loader_write() will occur, so that it can free its internal loading structures. Also, tries to parse any data that hasn't yet been parsed; if the remaining data is partial or corrupt, an error will be returned. If FALSE is returned, error will be set to an error from the GDK_PIXBUF_ERROR or G_FILE_ERROR domains. If you're just cancelling a load rather than expecting it to be finished, passing NULL for error to ignore it is reasonable. Remember that this does not unref the loader, so if you plan not to use it anymore, please g_object_unref() it.
Queries the GdkPixbufAnimation that a pixbuf loader is currently creating. In general it only makes sense to call this function after the "area-prepared" signal has been emitted by the loader. If the loader doesn't have enough bytes yet (hasn't emitted the "area-prepared" signal) this function will return NULL.
Obtains the available information about the format of the currently loading image file. Since 2.2
Queries the GdkPixbuf that a pixbuf loader is currently creating. In general it only makes sense to call this function after the "area-prepared" signal has been emitted by the loader; this means that enough data has been read to know the size of the image that will be allocated. If the loader has not received enough data via gdk_pixbuf_loader_write(), then this function returns NULL. The returned pixbuf will be the same in all future calls to the loader, so simply calling g_object_ref() should be sufficient to continue using it. Additionally, if the loader is an animation, it will return the "static image" of the animation (see gdk_pixbuf_animation_get_static_image()).
the main Gtk struct as a void*
Causes the image to be scaled while it is loaded. The desired image size can be determined relative to the original size of the image by calling gdk_pixbuf_loader_set_size() from a signal handler for the ::size-prepared signal. Attempts to set the desired image size are ignored after the emission of the ::size-prepared signal. Since 2.2
This will cause a pixbuf loader to parse the next count bytes of an image. It will return TRUE if the data was loaded successfully, and FALSE if an error occurred. In the latter case, the loader will be closed, and will not accept further writes. If FALSE is returned, error will be set to an error from the GDK_PIXBUF_ERROR or G_FILE_ERROR domains.
This will cause a pixbuf loader to parse a buffer inside a GBytes for an image. It will return TRUE if the data was loaded successfully, and FALSE if an error occurred. In the latter case, the loader will be closed, and will not accept further writes. If FALSE is returned, error will be set to an error from the GDK_PIXBUF_ERROR or G_FILE_ERROR domains. See also: gdk_pixbuf_loader_write() Since 2.30
the main Gtk struct
the main Gtk struct
the main Gtk struct as a void*
Gets a D Object from the objects table of associations.
The notify signal is emitted on an object when one of its properties has been changed. Note that getting this signal doesn't guarantee that the value of the property has actually changed, it may also be emitted when the setter for the property is called to reinstate the previous value.
Installs a new property. This is usually done in the class initializer. Note that it is possible to redefine a property in a derived class, by installing a property with the same name. This can be useful at times, e.g. to change the range of allowed values or the default value.
Installs new properties from an array of GParamSpecs. This is usually done in the class initializer. The property id of each property is the index of each GParamSpec in the pspecs array. The property id of 0 is treated specially by GObject and it should not be used to store a GParamSpec. This function should be used if you plan to use a static array of GParamSpecs and g_object_notify_by_pspec(). For instance, this Since 2.26
Looks up the GParamSpec for a property of a class.
Get an array of GParamSpec* for all properties of a class.
Registers property_id as referring to a property with the name name in a parent class or in an interface implemented by oclass. This allows this class to override a property implementation in a parent class or to provide the implementation of a property from an interface. Note Internally, overriding is implemented by creating a property of type GParamSpecOverride; generally operations that query the properties of the object class, such as g_object_class_find_property() or g_object_class_list_properties() will return the overridden property. However, in one case, the construct_properties argument of the constructor virtual function, the GParamSpecOverride is passed instead, so that the param_id field of the GParamSpec will be correct. For virtually all uses, this makes no difference. If you need to get the overridden property, you can call g_param_spec_get_redirect_target(). Since 2.4
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property. This function is meant to be called from the interface's default vtable initialization function (the class_init member of GTypeInfo.) It must not be called after after class_init has been called for any object types implementing this interface. Since 2.4
Find the GParamSpec with the given name for an interface. Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek(). Since 2.4
Lists the properties of an interface.Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek(). Since 2.4
Increases the reference count of object.
Decreases the reference count of object. When its reference count drops to 0, the object is finalized (i.e. its memory is freed).
Increase the reference count of object, and possibly remove the floating reference, if object has a floating reference. In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one. Since 2.10
Clears a reference to a GObject. object_ptr must not be NULL. If the reference is NULL then this function does nothing. Otherwise, the reference count of the object is decreased and the pointer is set to NULL. This function is threadsafe and modifies the pointer atomically, using memory barriers where needed. A macro is also included that allows this function to be used without pointer casts. Since 2.28
Checks whether object has a floating reference. Since 2.10
This function is intended for GObject implementations to re-enforce a floating object reference. Doing this is seldom required: all GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink(). Since 2.10
Adds a weak reference callback to an object. Weak references are used for notification when an object is finalized. They are called "weak references" because they allow you to safely hold a pointer to an object without calling g_object_ref() (g_object_ref() adds a strong reference, that is, forces the object to stay alive). Note that the weak references created by this method are not thread-safe: they cannot safely be used in one thread if the object's last g_object_unref() might happen in another thread. Use GWeakRef if thread-safety is required.
Removes a weak reference callback to an object.
Adds a weak reference from weak_pointer to object to indicate that the pointer located at weak_pointer_location is only valid during the lifetime of object. When the object is finalized, weak_pointer will be set to NULL. Note that as with g_object_weak_ref(), the weak references created by this method are not thread-safe: they cannot safely be used in one thread if the object's last g_object_unref() might happen in another thread. Use GWeakRef if thread-safety is required.
Removes a weak reference from object that was previously added using g_object_add_weak_pointer(). The weak_pointer_location has to match the one used with g_object_add_weak_pointer().
Increases the reference count of the object by one and sets a callback to be called when all other references to the object are dropped, or when this is already the last reference to the object and another reference is established. This functionality is intended for binding object to a proxy object managed by another memory manager. This is done with two paired references: the strong reference added by g_object_add_toggle_ref() and a reverse reference to the proxy object which is either a strong reference or weak reference. The setup is that when there are no other references to object, only a weak reference is held in the reverse direction from object to the proxy object, but when there are other references held to object, a strong reference is held. The notify callback is called when the reference from object to the proxy object should be toggled from strong to weak (is_last_ref true) or weak to strong (is_last_ref false). Since a (normal) reference must be held to the object before calling g_object_add_toggle_ref(), the initial state of the reverse link is always strong. Multiple toggle references may be added to the same gobject, however if there are multiple toggle references to an object, none of them will ever be notified until all but one are removed. For this reason, you should only ever use a toggle reference if there is important state in the proxy object. Since 2.8
Removes a reference added with g_object_add_toggle_ref(). The reference count of the object is decreased by one. Since 2.8
Emits a "notify" signal for the property property_name on object. When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Emits a "notify" signal for the property specified by pspec on object. This function omits the property name lookup, hence it is faster than g_object_notify(). One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with Since 2.26
Increases the freeze count on object. If the freeze count is non-zero, the emission of "notify" signals on object is stopped. The signals are queued until the freeze count is decreased to zero. Duplicate notifications are squashed so that at most one "notify" signal is emitted for each property modified while the object is frozen. This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Reverts the effect of a previous call to g_object_freeze_notify(). The freeze count is decreased on object and when it reaches zero, queued "notify" signals are emitted. Duplicate notifications for each property are squashed so that at most one "notify" signal is emitted for each property. It is an error to call this function when the freeze count is zero.
Gets a named field from the objects table of associations (see g_object_set_data()).
Each object carries around a table of associations from strings to pointers. This function lets you set an association. If the object already had an association with that name, the old association will be destroyed.
Like g_object_set_data() except it adds notification for when the association is destroyed, either by setting it to a different value or when the object is destroyed. Note that the destroy callback is not called if data is NULL.
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
This is a variant of g_object_get_data() which returns a 'duplicate' of the value. dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object. If the key is not set on the object then dup_func will be called with a NULL argument. Note that dup_func is called while user data of object is locked. This function can be useful to avoid races when multiple threads are using object data on the same key on the same object. Since 2.34
Compares the user data for the key key on object with oldval, and if they are the same, replaces oldval with newval. This is like a typical atomic compare-and-exchange operation, for user data on an object. If the previous value was replaced then ownership of the old value (oldval) is passed to the caller, including the registered destroy notify for it (passed out in old_destroy). Its up to the caller to free this as he wishes, which may or may not include using old_destroy as sometimes replacement should not destroy the object in the normal way. Return: TRUE if the existing value for key was replaced by newval, FALSE otherwise. Since 2.34
This function gets back user data pointers stored via g_object_set_qdata().
This sets an opaque, named pointer on an object. The name is specified through a GQuark (retrived e.g. via g_quark_from_static_string()), and the pointer can be gotten back from the object with g_object_get_qdata() until the object is finalized. Setting a previously set user data pointer, overrides (frees) the old pointer set, using NULL as pointer essentially removes the data stored.
This function works like g_object_set_qdata(), but in addition, a void (*destroy) (gpointer) function may be specified which is called with data as argument when the object is finalized, or the data is being overwritten by a call to g_object_set_qdata() with the same quark.
This function gets back user data pointers stored via g_object_set_qdata() and removes the data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update
This is a variant of g_object_get_qdata() which returns a 'duplicate' of the value. dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object. If the quark is not set on the object then dup_func will be called with a NULL argument. Note that dup_func is called while user data of object is locked. This function can be useful to avoid races when multiple threads are using object data on the same key on the same object. Since 2.34
Compares the user data for the key quark on object with oldval, and if they are the same, replaces oldval with newval. This is like a typical atomic compare-and-exchange operation, for user data on an object. If the previous value was replaced then ownership of the old value (oldval) is passed to the caller, including the registered destroy notify for it (passed out in old_destroy). Its up to the caller to free this as he wishes, which may or may not include using old_destroy as sometimes replacement should not destroy the object in the normal way. Return: TRUE if the existing value for quark was replaced by newval, FALSE otherwise. Since 2.34
Sets a property on an object.
Gets a property of an object. value must have been initialized to the expected type of the property (or a type to which the expected type can be transformed) using g_value_init(). In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset(). Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
Sets properties on an object.
Gets properties of an object. In general, a copy is made of the property contents and the caller is responsible for freeing the memory in the appropriate manner for the type, for instance by calling g_free() or g_object_unref(). See g_object_get().
This function essentially limits the life time of the closure to the life time of the object. That is, when the object is finalized, the closure is invalidated by calling g_closure_invalidate() on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, g_object_ref() and g_object_unref() are added as marshal guards to the closure, to ensure that an extra reference count is held on object during invocation of the closure. Usually, this function will be called on closures that use this object as closure data.
Releases all references to other objects. This can be used to break reference cycles. This functions should only be called from object system implementations.
GdkPixbufLoader provides a way for applications to drive the process of loading an image, by letting them send the image data directly to the loader instead of having the loader read the data from a file. Applications can use this functionality instead of gdk_pixbuf_new_from_file() or gdk_pixbuf_animation_new_from_file() when they need to parse image data in small chunks. For example, it should be used when reading an image from a (potentially) slow network connection, or when loading an extremely large file.
To use GdkPixbufLoader to load an image, just create a new one, and call gdk_pixbuf_loader_write() to send the data to it. When done, gdk_pixbuf_loader_close() should be called to end the stream and finalize everything. The loader will emit three important signals throughout the process. The first, "size_prepared", will be called as soon as the image has enough information to determine the size of the image to be used. If you want to scale the image while loading it, you can call gdk_pixbuf_loader_set_size() in response to this signal.
The second signal, "area_prepared", will be called as soon as the pixbuf of the desired has been allocated. You can obtain it by calling gdk_pixbuf_loader_get_pixbuf(). If you want to use it, simply ref it. In addition, no actual information will be passed in yet, so the pixbuf can be safely filled with any temporary graphics (or an initial color) as needed. You can also call gdk_pixbuf_loader_get_pixbuf() later and get the same pixbuf.
The last signal, "area_updated" gets called every time a region is updated. This way you can update a partially completed image. Note that you do not know anything about the completeness of an image from the area updated. For example, in an interlaced image, you need to make several passes before the image is done loading.
Loading an animation
Loading an animation is almost as easy as loading an image. Once the first "area_prepared" signal has been emitted, you can call gdk_pixbuf_loader_get_animation() to get the GdkPixbufAnimation struct and gdk_pixbuf_animation_get_iter() to get an GdkPixbufAnimationIter for displaying it.