SizeGroup

#GtkSizeGroup provides a mechanism for grouping a number of widgets together so they all request the same amount of space. This is typically useful when you want a column of widgets to have the same size, but you can’t use a #GtkGrid widget.

In detail, the size requested for each widget in a #GtkSizeGroup is the maximum of the sizes that would have been requested for each widget in the size group if they were not in the size group. The mode of the size group (see gtk_size_group_set_mode()) determines whether this applies to the horizontal size, the vertical size, or both sizes.

Note that size groups only affect the amount of space requested, not the size that the widgets finally receive. If you want the widgets in a #GtkSizeGroup to actually be the same size, you need to pack them in such a way that they get the size they request and not more. For example, if you are packing your widgets into a table, you would not include the %GTK_FILL flag.

#GtkSizeGroup objects are referenced by each widget in the size group, so once you have added all widgets to a #GtkSizeGroup, you can drop the initial reference to the size group with g_object_unref(). If the widgets in the size group are subsequently destroyed, then they will be removed from the size group and drop their references on the size group; when all widgets have been removed, the size group will be freed.

Widgets can be part of multiple size groups; GTK+ will compute the horizontal size of a widget from the horizontal requisition of all widgets that can be reached from the widget by a chain of size groups of type %GTK_SIZE_GROUP_HORIZONTAL or %GTK_SIZE_GROUP_BOTH, and the vertical size from the vertical requisition of all widgets that can be reached from the widget by a chain of size groups of type %GTK_SIZE_GROUP_VERTICAL or %GTK_SIZE_GROUP_BOTH.

Note that only non-contextual sizes of every widget are ever consulted by size groups (since size groups have no knowledge of what size a widget will be allocated in one dimension, it cannot derive how much height a widget will receive for a given width). When grouping widgets that trade height for width in mode %GTK_SIZE_GROUP_VERTICAL or %GTK_SIZE_GROUP_BOTH: the height for the minimum width will be the requested height for all widgets in the group. The same is of course true when horizontally grouping width for height widgets.

Widgets that trade height-for-width should set a reasonably large minimum width by way of #GtkLabel:width-chars for instance. Widgets with static sizes as well as widgets that grow (such as ellipsizing text) need no such considerations.

GtkSizeGroup as GtkBuildable

Size groups can be specified in a UI definition by placing an <object> element with class="GtkSizeGroup" somewhere in the UI definition. The widgets that belong to the size group are specified by a <widgets> element that may contain multiple <widget> elements, one for each member of the size group. The ”name” attribute gives the id of the widget.

An example of a UI definition fragment with GtkSizeGroup: |[ <object class="GtkSizeGroup"> <property name="mode">GTK_SIZE_GROUP_HORIZONTAL</property> <widgets> <widget name="radio1"/> <widget name="radio2"/> </widgets> </object> ]|

class SizeGroup : ObjectG , BuildableIF {

protected

GtkSizeGroup* gtkSizeGroup;

GtkSizeGroup* getSizeGroupStruct(bool transferOwnership);

void* getStruct();

this(GtkSizeGroup* gtkSizeGroup, bool ownedRef);

mixin BuildableT!(GtkSizeGroup) ;

static GType getType();

this(GtkSizeGroupMode mode);

void addWidget(Widget widget);

bool getIgnoreHidden();

GtkSizeGroupMode getMode();

ListSG getWidgets();

void removeWidget(Widget widget);

void setIgnoreHidden(bool ignoreHidden);

void setMode(GtkSizeGroupMode mode);

}

Constructors

this this(GtkSizeGroup* gtkSizeGroup, bool ownedRef): Sets our main struct and passes it to the parent class.
this this(GtkSizeGroupMode mode): Create a new #GtkSizeGroup.

Members

Functions

addWidget void addWidget(Widget widget): Adds a widget to a #GtkSizeGroup. In the future, the requisition of the widget will be determined as the maximum of its requisition and the requisition of the other widgets in the size group. Whether this applies horizontally, vertically, or in both directions depends on the mode of the size group. See gtk_size_group_set_mode().
getIgnoreHidden bool getIgnoreHidden(): Returns if invisible widgets are ignored when calculating the size.
getMode GtkSizeGroupMode getMode(): Gets the current mode of the size group. See gtk_size_group_set_mode().
getSizeGroupStruct GtkSizeGroup* getSizeGroupStruct(bool transferOwnership): Get the main Gtk struct
getStruct void* getStruct(): the main Gtk struct as a void*
getWidgets ListSG getWidgets(): Returns the list of widgets associated with @size_group.
removeWidget void removeWidget(Widget widget): Removes a widget from a #GtkSizeGroup.
setIgnoreHidden void setIgnoreHidden(bool ignoreHidden): Sets whether unmapped widgets should be ignored when calculating the size.
setMode void setMode(GtkSizeGroupMode mode): Sets the #GtkSizeGroupMode of the size group. The mode of the size group determines whether the widgets in the size group should all have the same horizontal requisition (%GTK_SIZE_GROUP_HORIZONTAL) all have the same vertical requisition (%GTK_SIZE_GROUP_VERTICAL), or should all have the same requisition in both directions (%GTK_SIZE_GROUP_BOTH).

Mixins

__anonymous mixin BuildableT!(GtkSizeGroup): Undocumented in source.

Static functions

getType GType getType()

Variables

gtkSizeGroup GtkSizeGroup* gtkSizeGroup;: the main Gtk struct

Inherited Members

From ObjectG

gObject GObject* gObject;: the main Gtk struct
ownedRef bool ownedRef;: Undocumented in source.
getObjectGStruct GObject* getObjectGStruct(bool transferOwnership): Get the main Gtk struct
getStruct void* getStruct(): the main Gtk struct as a void*
isGcRoot bool isGcRoot;: Undocumented in source.
destroyNotify void destroyNotify(ObjectG obj): Undocumented in source. Be warned that the author may not have intended to support it.
toggleNotify void toggleNotify(ObjectG obj, GObject* object, int isLastRef): Undocumented in source. Be warned that the author may not have intended to support it.
~this ~this(): Undocumented in source.
opCast T opCast()
getDObject RT getDObject(U obj, bool ownedRef): Gets a D Object from the objects table of associations.
setProperty void setProperty(string propertyName, T value)
unref deprecated void unref(ObjectG obj): Undocumented in source. Be warned that the author may not have intended to support it.
doref deprecated ObjectG doref(ObjectG obj): Undocumented in source. Be warned that the author may not have intended to support it.
addOnNotify gulong addOnNotify(void delegate(ParamSpec, ObjectG) dlg, string property, ConnectFlags connectFlags): The notify signal is emitted on an object when one of its properties has been changed. Note that getting this signal doesn't guarantee that the value of the property has actually changed, it may also be emitted when the setter for the property is called to reinstate the previous value.
getType GType getType()
compatControl size_t compatControl(size_t what, void* data)
interfaceFindProperty ParamSpec interfaceFindProperty(TypeInterface gIface, string propertyName): Find the #GParamSpec with the given name for an interface. Generally, the interface vtable passed in as @g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().
interfaceInstallProperty void interfaceInstallProperty(TypeInterface gIface, ParamSpec pspec): Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.
interfaceListProperties ParamSpec[] interfaceListProperties(TypeInterface gIface): Lists the properties of an interface.Generally, the interface vtable passed in as @g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().
addToggleRef void addToggleRef(GToggleNotify notify, void* data): Increases the reference count of the object by one and sets a callback to be called when all other references to the object are dropped, or when this is already the last reference to the object and another reference is established.
addWeakPointer void addWeakPointer(void* weakPointerLocation): Adds a weak reference from weak_pointer to @object to indicate that the pointer located at @weak_pointer_location is only valid during the lifetime of @object. When the @object is finalized, @weak_pointer will be set to %NULL.
bindProperty Binding bindProperty(string sourceProperty, ObjectG target, string targetProperty, GBindingFlags flags): Creates a binding between @source_property on @source and @target_property on @target. Whenever the @source_property is changed the @target_property is updated using the same value. For instance:
bindPropertyFull Binding bindPropertyFull(string sourceProperty, ObjectG target, string targetProperty, GBindingFlags flags, GBindingTransformFunc transformTo, GBindingTransformFunc transformFrom, void* userData, GDestroyNotify notify): Complete version of g_object_bind_property().
bindPropertyWithClosures Binding bindPropertyWithClosures(string sourceProperty, ObjectG target, string targetProperty, GBindingFlags flags, Closure transformTo, Closure transformFrom): Creates a binding between @source_property on @source and @target_property on @target, allowing you to set the transformation functions to be used by the binding.
dupData void* dupData(string key, GDuplicateFunc dupFunc, void* userData): This is a variant of g_object_get_data() which returns a 'duplicate' of the value. @dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object.
dupQdata void* dupQdata(GQuark quark, GDuplicateFunc dupFunc, void* userData): This is a variant of g_object_get_qdata() which returns a 'duplicate' of the value. @dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object.
forceFloating void forceFloating(): This function is intended for #GObject implementations to re-enforce a floating[floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().
freezeNotify void freezeNotify(): Increases the freeze count on @object. If the freeze count is non-zero, the emission of "notify" signals on @object is stopped. The signals are queued until the freeze count is decreased to zero. Duplicate notifications are squashed so that at most one #GObject::notify signal is emitted for each property modified while the object is frozen.
getData void* getData(string key): Gets a named field from the objects table of associations (see g_object_set_data()).
getProperty void getProperty(string propertyName, Value value): Gets a property of an object. @value must have been initialized to the expected type of the property (or a type to which the expected type can be transformed) using g_value_init().
getQdata void* getQdata(GQuark quark): This function gets back user data pointers stored via g_object_set_qdata().
getValist void getValist(string firstPropertyName, void* varArgs): Gets properties of an object.
getv void getv(string[] names, Value[] values): Gets @n_properties properties for an @object. Obtained properties will be set to @values. All properties must be valid. Warnings will be emitted and undefined behaviour may result if invalid properties are passed in.
isFloating bool isFloating(): Checks whether @object has a floating[floating-ref] reference.
notify void notify(string propertyName): Emits a "notify" signal for the property @property_name on @object.
notifyByPspec void notifyByPspec(ParamSpec pspec): Emits a "notify" signal for the property specified by @pspec on @object.
doref ObjectG doref(): Increases the reference count of @object.
refSink ObjectG refSink(): Increase the reference count of @object, and possibly remove the floating[floating-ref] reference, if @object has a floating reference.
removeToggleRef void removeToggleRef(GToggleNotify notify, void* data): Removes a reference added with g_object_add_toggle_ref(). The reference count of the object is decreased by one.
removeWeakPointer void removeWeakPointer(void* weakPointerLocation): Removes a weak reference from @object that was previously added using g_object_add_weak_pointer(). The @weak_pointer_location has to match the one used with g_object_add_weak_pointer().
replaceData bool replaceData(string key, void* oldval, void* newval, GDestroyNotify destroy, GDestroyNotify oldDestroy): Compares the user data for the key @key on @object with @oldval, and if they are the same, replaces @oldval with @newval.
replaceQdata bool replaceQdata(GQuark quark, void* oldval, void* newval, GDestroyNotify destroy, GDestroyNotify oldDestroy): Compares the user data for the key @quark on @object with @oldval, and if they are the same, replaces @oldval with @newval.
runDispose void runDispose(): Releases all references to other objects. This can be used to break reference cycles.
setData void setData(string key, void* data): Each object carries around a table of associations from strings to pointers. This function lets you set an association.
setDataFull void setDataFull(string key, void* data, GDestroyNotify destroy): Like g_object_set_data() except it adds notification for when the association is destroyed, either by setting it to a different value or when the object is destroyed.
setProperty void setProperty(string propertyName, Value value): Sets a property on an object.
setQdata void setQdata(GQuark quark, void* data): This sets an opaque, named pointer on an object. The name is specified through a #GQuark (retrived e.g. via g_quark_from_static_string()), and the pointer can be gotten back from the @object with g_object_get_qdata() until the @object is finalized. Setting a previously set user data pointer, overrides (frees) the old pointer set, using #NULL as pointer essentially removes the data stored.
setQdataFull void setQdataFull(GQuark quark, void* data, GDestroyNotify destroy): This function works like g_object_set_qdata(), but in addition, a void (*destroy) (gpointer) function may be specified which is called with @data as argument when the @object is finalized, or the data is being overwritten by a call to g_object_set_qdata() with the same @quark.
setValist void setValist(string firstPropertyName, void* varArgs): Sets properties on an object.
setv void setv(string[] names, Value[] values): Sets @n_properties properties for an @object. Properties to be set will be taken from @values. All properties must be valid. Warnings will be emitted and undefined behaviour may result if invalid properties are passed in.
stealData void* stealData(string key): Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
stealQdata void* stealQdata(GQuark quark): This function gets back user data pointers stored via g_object_set_qdata() and removes the @data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update user data pointers with a destroy notifier, for example: |[ void object_add_to_user_list (GObject *object, const gchar *new_string) { // the quark, naming the object data GQuark quark_string_list = g_quark_from_static_string ("my-string-list"); // retrive the old string list GList *list = g_object_steal_qdata (object, quark_string_list);
thawNotify void thawNotify(): Reverts the effect of a previous call to g_object_freeze_notify(). The freeze count is decreased on @object and when it reaches zero, queued "notify" signals are emitted.
unref void unref(): Decreases the reference count of @object. When its reference count drops to 0, the object is finalized (i.e. its memory is freed).
watchClosure void watchClosure(Closure closure): This function essentially limits the life time of the @closure to the life time of the object. That is, when the object is finalized, the @closure is invalidated by calling g_closure_invalidate() on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, g_object_ref() and g_object_unref() are added as marshal guards to the @closure, to ensure that an extra reference count is held on @object during invocation of the @closure. Usually, this function will be called on closures that use this @object as closure data.
weakRef void weakRef(GWeakNotify notify, void* data): Adds a weak reference callback to an object. Weak references are used for notification when an object is finalized. They are called "weak references" because they allow you to safely hold a pointer to an object without calling g_object_ref() (g_object_ref() adds a strong reference, that is, forces the object to stay alive).
weakUnref void weakUnref(GWeakNotify notify, void* data): Removes a weak reference callback to an object.
clearObject void clearObject(ObjectG objectPtr): Clears a reference to a #GObject.

From BuildableIF

getBuildableStruct GtkBuildable* getBuildableStruct(bool transferOwnership): Get the main Gtk struct
getStruct void* getStruct(): the main Gtk struct as a void*
getType GType getType()
addChild void addChild(Builder builder, ObjectG child, string type): Adds a child to @buildable. @type is an optional string describing how the child should be added.
constructChild ObjectG constructChild(Builder builder, string name): Constructs a child of @buildable with the name @name.
customFinished void customFinished(Builder builder, ObjectG child, string tagname, void* data): This is similar to gtk_buildable_parser_finished() but is called once for each custom tag handled by the @buildable.
customTagEnd
void customTagEnd(Builder builder, ObjectG child, string tagname, void** data): This is called at the end of each custom element handled by the buildable.
customTagStart bool customTagStart(Builder builder, ObjectG child, string tagname, GMarkupParser parser, void* data): This is called for each unknown element under <child>.
getInternalChild ObjectG getInternalChild(Builder builder, string childname): Get the internal child called @childname of the @buildable object.
buildableGetName string buildableGetName(): Gets the name of the @buildable object.
parserFinished void parserFinished(Builder builder): Called when the builder finishes the parsing of a [GtkBuilder UI definition][BUILDER-UI]. Note that this will be called once for each time gtk_builder_add_from_file() or gtk_builder_add_from_string() is called on a builder.
setBuildableProperty void setBuildableProperty(Builder builder, string name, Value value): Sets the property name @name to @value on the @buildable object.
buildableSetName void buildableSetName(string name): Sets the name of the @buildable object.