Sets our main struct and passes it to the parent class.
Create a new process with the given flags and argument list.
Communicate with the subprocess until it terminates, and all input and output has been completed.
Asynchronous version of g_subprocess_communicate(). Complete invocation with g_subprocess_communicate_finish().
Complete an invocation of g_subprocess_communicate_async().
Like g_subprocess_communicate(), but validates the output of the process as UTF-8, and returns it as a regular NUL terminated string.
Asynchronous version of g_subprocess_communicate_utf8(). Complete invocation with g_subprocess_communicate_utf8_finish().
Complete an invocation of g_subprocess_communicate_utf8_async().
Use an operating-system specific method to attempt an immediate, forceful termination of the process. There is no mechanism to determine whether or not the request itself was successful; however, you can use g_subprocess_wait() to monitor the status of the process after calling this function.
Check the exit status of the subprocess, given that it exited normally. This is the value passed to the exit() system call or the return value from main.
On UNIX, returns the process ID as a decimal string. On Windows, returns the result of GetProcessId() also as a string.
Check if the given subprocess exited normally (ie: by way of exit() or return from main()).
Check if the given subprocess terminated in response to a signal.
Gets the raw status code of the process, as from waitpid().
Gets the #GInputStream from which to read the stderr output of @subprocess.
Gets the #GOutputStream that you can write to in order to give data to the stdin of @subprocess.
Gets the #GInputStream from which to read the stdout output of @subprocess.
the main Gtk struct as a void*
Get the main Gtk struct
Checks if the process was "successful". A process is considered successful if it exited cleanly with an exit status of 0, either by way of the exit() system call or return from main().
Get the signal number that caused the subprocess to terminate, given that it terminated due to a signal.
Sends the UNIX signal @signal_num to the subprocess, if it is still running.
Synchronously wait for the subprocess to terminate.
Wait for the subprocess to terminate.
Combines g_subprocess_wait() with g_spawn_check_exit_status().
Combines g_subprocess_wait_async() with g_spawn_check_exit_status().
Collects the result of a previous call to g_subprocess_wait_check_async().
Collects the result of a previous call to g_subprocess_wait_async().
the main Gtk struct
the main Gtk struct
Get the main Gtk struct
the main Gtk struct as a void*
Gets a D Object from the objects table of associations.
The notify signal is emitted on an object when one of its properties has been changed. Note that getting this signal doesn't guarantee that the value of the property has actually changed, it may also be emitted when the setter for the property is called to reinstate the previous value.
Find the #GParamSpec with the given name for an interface. Generally, the interface vtable passed in as @g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.
Lists the properties of an interface.Generally, the interface vtable passed in as @g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().
Increases the reference count of the object by one and sets a callback to be called when all other references to the object are dropped, or when this is already the last reference to the object and another reference is established.
Adds a weak reference from weak_pointer to @object to indicate that the pointer located at @weak_pointer_location is only valid during the lifetime of @object. When the @object is finalized, @weak_pointer will be set to %NULL.
Creates a binding between @source_property on @source and @target_property on @target. Whenever the @source_property is changed the @target_property is updated using the same value. For instance:
Complete version of g_object_bind_property().
Creates a binding between @source_property on @source and @target_property on @target, allowing you to set the transformation functions to be used by the binding.
This is a variant of g_object_get_data() which returns a 'duplicate' of the value. @dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object.
This is a variant of g_object_get_qdata() which returns a 'duplicate' of the value. @dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object.
This function is intended for #GObject implementations to re-enforce a floating[floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().
Increases the freeze count on @object. If the freeze count is non-zero, the emission of "notify" signals on @object is stopped. The signals are queued until the freeze count is decreased to zero. Duplicate notifications are squashed so that at most one #GObject::notify signal is emitted for each property modified while the object is frozen.
Gets a named field from the objects table of associations (see g_object_set_data()).
Gets a property of an object. @value must have been initialized to the expected type of the property (or a type to which the expected type can be transformed) using g_value_init().
This function gets back user data pointers stored via g_object_set_qdata().
Gets properties of an object.
Gets @n_properties properties for an @object. Obtained properties will be set to @values. All properties must be valid. Warnings will be emitted and undefined behaviour may result if invalid properties are passed in.
Checks whether @object has a floating[floating-ref] reference.
Emits a "notify" signal for the property @property_name on @object.
Emits a "notify" signal for the property specified by @pspec on @object.
Increases the reference count of @object.
Increase the reference count of @object, and possibly remove the floating[floating-ref] reference, if @object has a floating reference.
Removes a reference added with g_object_add_toggle_ref(). The reference count of the object is decreased by one.
Removes a weak reference from @object that was previously added using g_object_add_weak_pointer(). The @weak_pointer_location has to match the one used with g_object_add_weak_pointer().
Compares the user data for the key @key on @object with @oldval, and if they are the same, replaces @oldval with @newval.
Compares the user data for the key @quark on @object with @oldval, and if they are the same, replaces @oldval with @newval.
Releases all references to other objects. This can be used to break reference cycles.
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
Like g_object_set_data() except it adds notification for when the association is destroyed, either by setting it to a different value or when the object is destroyed.
Sets a property on an object.
This sets an opaque, named pointer on an object. The name is specified through a #GQuark (retrived e.g. via g_quark_from_static_string()), and the pointer can be gotten back from the @object with g_object_get_qdata() until the @object is finalized. Setting a previously set user data pointer, overrides (frees) the old pointer set, using #NULL as pointer essentially removes the data stored.
This function works like g_object_set_qdata(), but in addition, a void (*destroy) (gpointer) function may be specified which is called with @data as argument when the @object is finalized, or the data is being overwritten by a call to g_object_set_qdata() with the same @quark.
Sets properties on an object.
Sets @n_properties properties for an @object. Properties to be set will be taken from @values. All properties must be valid. Warnings will be emitted and undefined behaviour may result if invalid properties are passed in.
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
This function gets back user data pointers stored via g_object_set_qdata() and removes the @data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update user data pointers with a destroy notifier, for example: |[<!-- language="C" --> void object_add_to_user_list (GObject *object, const gchar *new_string) { // the quark, naming the object data GQuark quark_string_list = g_quark_from_static_string ("my-string-list"); // retrive the old string list GList *list = g_object_steal_qdata (object, quark_string_list);
Reverts the effect of a previous call to g_object_freeze_notify(). The freeze count is decreased on @object and when it reaches zero, queued "notify" signals are emitted.
Decreases the reference count of @object. When its reference count drops to 0, the object is finalized (i.e. its memory is freed).
This function essentially limits the life time of the @closure to the life time of the object. That is, when the object is finalized, the @closure is invalidated by calling g_closure_invalidate() on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, g_object_ref() and g_object_unref() are added as marshal guards to the @closure, to ensure that an extra reference count is held on @object during invocation of the @closure. Usually, this function will be called on closures that use this @object as closure data.
Adds a weak reference callback to an object. Weak references are used for notification when an object is finalized. They are called "weak references" because they allow you to safely hold a pointer to an object without calling g_object_ref() (g_object_ref() adds a strong reference, that is, forces the object to stay alive).
Removes a weak reference callback to an object.
Clears a reference to a #GObject.
Get the main Gtk struct
the main Gtk struct as a void*
Initializes the object implementing the interface.
#GSubprocess allows the creation of and interaction with child processes.
Processes can be communicated with using standard GIO-style APIs (ie: #GInputStream, #GOutputStream). There are GIO-style APIs to wait for process termination (ie: cancellable and with an asynchronous variant).
There is an API to force a process to terminate, as well as a race-free API for sending UNIX signals to a subprocess.
One major advantage that GIO brings over the core GLib library is comprehensive API for asynchronous I/O, such g_output_stream_splice_async(). This makes GSubprocess significantly more powerful and flexible than equivalent APIs in some other languages such as the subprocess.py included with Python. For example, using #GSubprocess one could create two child processes, reading standard output from the first, processing it, and writing to the input stream of the second, all without blocking the main loop.
A powerful g_subprocess_communicate() API is provided similar to the communicate() method of subprocess.py. This enables very easy interaction with a subprocess that has been opened with pipes.
#GSubprocess defaults to tight control over the file descriptors open in the child process, avoiding dangling-fd issues that are caused by a simple fork()/exec(). The only open file descriptors in the spawned process are ones that were explicitly specified by the #GSubprocess API (unless %G_SUBPROCESS_FLAGS_INHERIT_FDS was specified).
#GSubprocess will quickly reap all child processes as they exit, avoiding "zombie processes" remaining around for long periods of time. g_subprocess_wait() can be used to wait for this to happen, but it will happen even without the call being explicitly made.
As a matter of principle, #GSubprocess has no API that accepts shell-style space-separated strings. It will, however, match the typical shell behaviour of searching the PATH for executables that do not contain a directory separator in their name.
#GSubprocess attempts to have a very simple API for most uses (ie: spawning a subprocess with arguments and support for most typical kinds of input and output redirection). See g_subprocess_new(). The #GSubprocessLauncher API is provided for more complicated cases (advanced types of redirection, environment variable manipulation, change of working directory, child setup functions, etc).
A typical use of #GSubprocess will involve calling g_subprocess_new(), followed by g_subprocess_wait_async() or g_subprocess_wait(). After the process exits, the status can be checked using functions such as g_subprocess_get_if_exited() (which are similar to the familiar WIFEXITED-style POSIX macros).