mask to apply to data before matching against @pattern
pattern to match (after mask is applied)
offset into the adapter data from which to start scanning, returns the last scanned position.
number of bytes to scan from offset
offset of the first match, or -1 if no match was found.
|[ // Assume the adapter contains 0x00 0x01 0x02 ... 0xfe 0xff
gst_adapter_masked_scan_uint32 (adapter, 0xffffffff, 0x00010203, 0, 256); // -> returns 0 gst_adapter_masked_scan_uint32 (adapter, 0xffffffff, 0x00010203, 1, 255); // -> returns -1 gst_adapter_masked_scan_uint32 (adapter, 0xffffffff, 0x01020304, 1, 255); // -> returns 1 gst_adapter_masked_scan_uint32 (adapter, 0xffff, 0x0001, 0, 256); // -> returns -1 gst_adapter_masked_scan_uint32 (adapter, 0xffff, 0x0203, 0, 256); // -> returns 0 gst_adapter_masked_scan_uint32 (adapter, 0xffff0000, 0x02030000, 0, 256); // -> returns 2 gst_adapter_masked_scan_uint32 (adapter, 0xffff0000, 0x02030000, 0, 4); // -> returns -1 ]|
Scan for pattern @pattern with applied mask @mask in the adapter data, starting from offset @offset.
The bytes in @pattern and @mask are interpreted left-to-right, regardless of endianness. All four bytes of the pattern must be present in the adapter for it to match, even if the first or last bytes are masked out.
It is an error to call this function without making sure that there is enough data (offset+size bytes) in the adapter.
This function calls gst_adapter_masked_scan_uint32_peek() passing %NULL for value.