/*
 * This file is part of gtkD.
 *
 * gtkD is free software; you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License
 * as published by the Free Software Foundation; either version 3
 * of the License, or (at your option) any later version, with
 * some exceptions, please read the COPYING file.
 *
 * gtkD is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with gtkD; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110, USA
 */

// generated automatically - do not change
// find conversion definition on APILookup.txt
// implement new conversion functionalities on the wrap.utils pakage


module gstreamer.BufferPool;

private import glib.ConstructionException;
private import glib.Str;
private import gobject.ObjectG;
private import gstreamer.AllocationParams;
private import gstreamer.Allocator;
private import gstreamer.Buffer;
private import gstreamer.Caps;
private import gstreamer.ObjectGst;
private import gstreamer.Structure;
private import gstreamerc.gstreamer;
public  import gstreamerc.gstreamertypes;


/**
 * A #GstBufferPool is an object that can be used to pre-allocate and recycle
 * buffers of the same size and with the same properties.
 * 
 * A #GstBufferPool is created with gst_buffer_pool_new().
 * 
 * Once a pool is created, it needs to be configured. A call to
 * gst_buffer_pool_get_config() returns the current configuration structure from
 * the pool. With gst_buffer_pool_config_set_params() and
 * gst_buffer_pool_config_set_allocator() the bufferpool parameters and
 * allocator can be configured. Other properties can be configured in the pool
 * depending on the pool implementation.
 * 
 * A bufferpool can have extra options that can be enabled with
 * gst_buffer_pool_config_add_option(). The available options can be retrieved
 * with gst_buffer_pool_get_options(). Some options allow for additional
 * configuration properties to be set.
 * 
 * After the configuration structure has been configured,
 * gst_buffer_pool_set_config() updates the configuration in the pool. This can
 * fail when the configuration structure is not accepted.
 * 
 * After the a pool has been configured, it can be activated with
 * gst_buffer_pool_set_active(). This will preallocate the configured resources
 * in the pool.
 * 
 * When the pool is active, gst_buffer_pool_acquire_buffer() can be used to
 * retrieve a buffer from the pool.
 * 
 * Buffers allocated from a bufferpool will automatically be returned to the
 * pool with gst_buffer_pool_release_buffer() when their refcount drops to 0.
 * 
 * The bufferpool can be deactivated again with gst_buffer_pool_set_active().
 * All further gst_buffer_pool_acquire_buffer() calls will return an error. When
 * all buffers are returned to the pool they will be freed.
 * 
 * Use gst_object_unref() to release the reference to a bufferpool. If the
 * refcount of the pool reaches 0, the pool will be freed.
 */
public class BufferPool : ObjectGst
{
	/** the main Gtk struct */
	protected GstBufferPool* gstBufferPool;

	/** Get the main Gtk struct */
	public GstBufferPool* getBufferPoolStruct(bool transferOwnership = false)
	{
		if (transferOwnership)
			ownedRef = false;
		return gstBufferPool;
	}

	/** the main Gtk struct as a void* */
	protected override void* getStruct()
	{
		return cast(void*)gstBufferPool;
	}

	protected override void setStruct(GObject* obj)
	{
		gstBufferPool = cast(GstBufferPool*)obj;
		super.setStruct(obj);
	}

	/**
	 * Sets our main struct and passes it to the parent class.
	 */
	public this (GstBufferPool* gstBufferPool, bool ownedRef = false)
	{
		this.gstBufferPool = gstBufferPool;
		super(cast(GstObject*)gstBufferPool, ownedRef);
	}


	/** */
	public static GType getType()
	{
		return gst_buffer_pool_get_type();
	}

	/**
	 * Creates a new #GstBufferPool instance.
	 *
	 * Returns: a new #GstBufferPool instance
	 *
	 * Throws: ConstructionException GTK+ fails to create the object.
	 */
	public this()
	{
		auto p = gst_buffer_pool_new();
		
		if(p is null)
		{
			throw new ConstructionException("null returned by new");
		}
		
		this(cast(GstBufferPool*) p);
	}

	/**
	 * Enabled the option in @config. This will instruct the @bufferpool to enable
	 * the specified option on the buffers that it allocates.
	 *
	 * The supported options by @pool can be retrieved with gst_buffer_pool_get_options().
	 *
	 * Params:
	 *     config = a #GstBufferPool configuration
	 *     option = an option to add
	 */
	public static void configAddOption(Structure config, string option)
	{
		gst_buffer_pool_config_add_option((config is null) ? null : config.getStructureStruct(), Str.toStringz(option));
	}

	/**
	 * Get the @allocator and @params from @config.
	 *
	 * Params:
	 *     config = a #GstBufferPool configuration
	 *     allocator = a #GstAllocator, or %NULL
	 *     params = #GstAllocationParams, or %NULL
	 *
	 * Returns: %TRUE, if the values are set.
	 */
	public static bool configGetAllocator(Structure config, ref Allocator allocator, out AllocationParams params)
	{
		GstAllocator* outallocator = allocator.getAllocatorStruct();
		GstAllocationParams* outparams = gMalloc!GstAllocationParams();
		
		auto p = gst_buffer_pool_config_get_allocator((config is null) ? null : config.getStructureStruct(), &outallocator, outparams) != 0;
		
		allocator = ObjectG.getDObject!(Allocator)(outallocator);
		params = ObjectG.getDObject!(AllocationParams)(outparams, true);
		
		return p;
	}

	/**
	 * Parse an available @config and get the option at @index of the options API
	 * array.
	 *
	 * Params:
	 *     config = a #GstBufferPool configuration
	 *     index = position in the option array to read
	 *
	 * Returns: a #gchar of the option at @index.
	 */
	public static string configGetOption(Structure config, uint index)
	{
		return Str.toString(gst_buffer_pool_config_get_option((config is null) ? null : config.getStructureStruct(), index));
	}

	/**
	 * Get the configuration values from @config.
	 *
	 * Params:
	 *     config = a #GstBufferPool configuration
	 *     caps = the caps of buffers
	 *     size = the size of each buffer, not including prefix and padding
	 *     minBuffers = the minimum amount of buffers to allocate.
	 *     maxBuffers = the maximum amount of buffers to allocate or 0 for unlimited.
	 *
	 * Returns: %TRUE if all parameters could be fetched.
	 */
	public static bool configGetParams(Structure config, out Caps caps, out uint size, out uint minBuffers, out uint maxBuffers)
	{
		GstCaps* outcaps = null;
		
		auto p = gst_buffer_pool_config_get_params((config is null) ? null : config.getStructureStruct(), &outcaps, &size, &minBuffers, &maxBuffers) != 0;
		
		caps = ObjectG.getDObject!(Caps)(outcaps);
		
		return p;
	}

	/**
	 * Check if @config contains @option.
	 *
	 * Params:
	 *     config = a #GstBufferPool configuration
	 *     option = an option
	 *
	 * Returns: %TRUE if the options array contains @option.
	 */
	public static bool configHasOption(Structure config, string option)
	{
		return gst_buffer_pool_config_has_option((config is null) ? null : config.getStructureStruct(), Str.toStringz(option)) != 0;
	}

	/**
	 * Retrieve the number of values currently stored in the options array of the
	 * @config structure.
	 *
	 * Params:
	 *     config = a #GstBufferPool configuration
	 *
	 * Returns: the options array size as a #guint.
	 */
	public static uint configNOptions(Structure config)
	{
		return gst_buffer_pool_config_n_options((config is null) ? null : config.getStructureStruct());
	}

	/**
	 * Set the @allocator and @params on @config.
	 *
	 * One of @allocator and @params can be %NULL, but not both. When @allocator
	 * is %NULL, the default allocator of the pool will use the values in @param
	 * to perform its allocation. When @param is %NULL, the pool will use the
	 * provided @allocator with its default #GstAllocationParams.
	 *
	 * A call to gst_buffer_pool_set_config() can update the allocator and params
	 * with the values that it is able to do. Some pools are, for example, not able
	 * to operate with different allocators or cannot allocate with the values
	 * specified in @params. Use gst_buffer_pool_get_config() to get the currently
	 * used values.
	 *
	 * Params:
	 *     config = a #GstBufferPool configuration
	 *     allocator = a #GstAllocator
	 *     params = #GstAllocationParams
	 */
	public static void configSetAllocator(Structure config, Allocator allocator, AllocationParams params)
	{
		gst_buffer_pool_config_set_allocator((config is null) ? null : config.getStructureStruct(), (allocator is null) ? null : allocator.getAllocatorStruct(), (params is null) ? null : params.getAllocationParamsStruct());
	}

	/**
	 * Configure @config with the given parameters.
	 *
	 * Params:
	 *     config = a #GstBufferPool configuration
	 *     caps = caps for the buffers
	 *     size = the size of each buffer, not including prefix and padding
	 *     minBuffers = the minimum amount of buffers to allocate.
	 *     maxBuffers = the maximum amount of buffers to allocate or 0 for unlimited.
	 */
	public static void configSetParams(Structure config, Caps caps, uint size, uint minBuffers, uint maxBuffers)
	{
		gst_buffer_pool_config_set_params((config is null) ? null : config.getStructureStruct(), (caps is null) ? null : caps.getCapsStruct(), size, minBuffers, maxBuffers);
	}

	/**
	 * Validate that changes made to @config are still valid in the context of the
	 * expected parameters. This function is a helper that can be used to validate
	 * changes made by a pool to a config when gst_buffer_pool_set_config()
	 * returns %FALSE. This expects that @caps haven't changed and that
	 * @min_buffers aren't lower then what we initially expected.
	 * This does not check if options or allocator parameters are still valid,
	 * won't check if size have changed, since changing the size is valid to adapt
	 * padding.
	 *
	 * Params:
	 *     config = a #GstBufferPool configuration
	 *     caps = the excepted caps of buffers
	 *     size = the expected size of each buffer, not including prefix and padding
	 *     minBuffers = the expected minimum amount of buffers to allocate.
	 *     maxBuffers = the expect maximum amount of buffers to allocate or 0 for unlimited.
	 *
	 * Returns: %TRUE, if the parameters are valid in this context.
	 *
	 * Since: 1.4
	 */
	public static bool configValidateParams(Structure config, Caps caps, uint size, uint minBuffers, uint maxBuffers)
	{
		return gst_buffer_pool_config_validate_params((config is null) ? null : config.getStructureStruct(), (caps is null) ? null : caps.getCapsStruct(), size, minBuffers, maxBuffers) != 0;
	}

	/**
	 * Acquire a buffer from @pool. @buffer should point to a memory location that
	 * can hold a pointer to the new buffer.
	 *
	 * @params can be %NULL or contain optional parameters to influence the
	 * allocation.
	 *
	 * Params:
	 *     buffer = a location for a #GstBuffer
	 *     params = parameters.
	 *
	 * Returns: a #GstFlowReturn such as %GST_FLOW_FLUSHING when the pool is
	 *     inactive.
	 */
	public GstFlowReturn acquireBuffer(out Buffer buffer, GstBufferPoolAcquireParams* params)
	{
		GstBuffer* outbuffer = null;
		
		auto p = gst_buffer_pool_acquire_buffer(gstBufferPool, &outbuffer, params);
		
		buffer = ObjectG.getDObject!(Buffer)(outbuffer);
		
		return p;
	}

	/**
	 * Get a copy of the current configuration of the pool. This configuration
	 * can either be modified and used for the gst_buffer_pool_set_config() call
	 * or it must be freed after usage.
	 *
	 * Returns: a copy of the current configuration of @pool. use
	 *     gst_structure_free() after usage or gst_buffer_pool_set_config().
	 */
	public Structure getConfig()
	{
		auto p = gst_buffer_pool_get_config(gstBufferPool);
		
		if(p is null)
		{
			return null;
		}
		
		return ObjectG.getDObject!(Structure)(cast(GstStructure*) p, true);
	}

	/**
	 * Get a %NULL terminated array of string with supported bufferpool options for
	 * @pool. An option would typically be enabled with
	 * gst_buffer_pool_config_add_option().
	 *
	 * Returns: a %NULL terminated array
	 *     of strings.
	 */
	public string[] getOptions()
	{
		return Str.toStringArray(gst_buffer_pool_get_options(gstBufferPool));
	}

	/**
	 * Check if the bufferpool supports @option.
	 *
	 * Params:
	 *     option = an option
	 *
	 * Returns: %TRUE if the buffer pool contains @option.
	 */
	public bool hasOption(string option)
	{
		return gst_buffer_pool_has_option(gstBufferPool, Str.toStringz(option)) != 0;
	}

	/**
	 * Check if @pool is active. A pool can be activated with the
	 * gst_buffer_pool_set_active() call.
	 *
	 * Returns: %TRUE when the pool is active.
	 */
	public bool isActive()
	{
		return gst_buffer_pool_is_active(gstBufferPool) != 0;
	}

	/**
	 * Release @buffer to @pool. @buffer should have previously been allocated from
	 * @pool with gst_buffer_pool_acquire_buffer().
	 *
	 * This function is usually called automatically when the last ref on @buffer
	 * disappears.
	 *
	 * Params:
	 *     buffer = a #GstBuffer
	 */
	public void releaseBuffer(Buffer buffer)
	{
		gst_buffer_pool_release_buffer(gstBufferPool, (buffer is null) ? null : buffer.getBufferStruct());
	}

	/**
	 * Control the active state of @pool. When the pool is inactive, new calls to
	 * gst_buffer_pool_acquire_buffer() will return with %GST_FLOW_FLUSHING.
	 *
	 * Activating the bufferpool will preallocate all resources in the pool based on
	 * the configuration of the pool.
	 *
	 * Deactivating will free the resources again when there are no outstanding
	 * buffers. When there are outstanding buffers, they will be freed as soon as
	 * they are all returned to the pool.
	 *
	 * Params:
	 *     active = the new active state
	 *
	 * Returns: %FALSE when the pool was not configured or when preallocation of the
	 *     buffers failed.
	 */
	public bool setActive(bool active)
	{
		return gst_buffer_pool_set_active(gstBufferPool, active) != 0;
	}

	/**
	 * Set the configuration of the pool. If the pool is already configured, and
	 * the configuration haven't change, this function will return %TRUE. If the
	 * pool is active, this method will return %FALSE and active configuration
	 * will remain. Buffers allocated form this pool must be returned or else this
	 * function will do nothing and return %FALSE.
	 *
	 * @config is a #GstStructure that contains the configuration parameters for
	 * the pool. A default and mandatory set of parameters can be configured with
	 * gst_buffer_pool_config_set_params(), gst_buffer_pool_config_set_allocator()
	 * and gst_buffer_pool_config_add_option().
	 *
	 * If the parameters in @config can not be set exactly, this function returns
	 * %FALSE and will try to update as much state as possible. The new state can
	 * then be retrieved and refined with gst_buffer_pool_get_config().
	 *
	 * This function takes ownership of @config.
	 *
	 * Params:
	 *     config = a #GstStructure
	 *
	 * Returns: %TRUE when the configuration could be set.
	 */
	public bool setConfig(Structure config)
	{
		return gst_buffer_pool_set_config(gstBufferPool, (config is null) ? null : config.getStructureStruct(true)) != 0;
	}

	/**
	 * Enable or disable the flushing state of a @pool without freeing or
	 * allocating buffers.
	 *
	 * Params:
	 *     flushing = whether to start or stop flushing
	 *
	 * Since: 1.4
	 */
	public void setFlushing(bool flushing)
	{
		gst_buffer_pool_set_flushing(gstBufferPool, flushing);
	}
}