ValueT

#AtkValue should be implemented for components which either display a value from a bounded range, or which allow the user to specify a value from a bounded range, or both. For instance, most sliders and range controls, as well as dials, should have #AtkObject representations which implement #AtkValue on the component's behalf. #AtKValues may be read-only, in which case attempts to alter the value return would fail.

<refsect1 id="current-value-text"> <title>On the subject of current value text</title> <para> In addition to providing the current value, implementors can optionally provide an end-user-consumable textual description associated with this value. This description should be included when the numeric value fails to convey the full, on-screen representation seen by users. </para>

<example> <title>Password strength</title> A password strength meter whose value changes as the user types their new password. Red is used for values less than 4.0, yellow for values between 4.0 and 7.0, and green for values greater than 7.0. In this instance, value text should be provided by the implementor. Appropriate value text would be "weak", "acceptable," and "strong" respectively. </example>

A level bar whose value changes to reflect the battery charge. The color remains the same regardless of the charge and there is no on-screen text reflecting the fullness of the battery. In this case, because the position within the bar is the only indication the user has of the current charge, value text should not be provided by the implementor.

<refsect2 id="implementor-notes"> <title>Implementor Notes</title> <para> Implementors should bear in mind that assistive technologies will likely prefer the value text provided over the numeric value when presenting a widget's value. As a result, strings not intended for end users should not be exposed in the value text, and strings which are exposed should be localized. In the case of widgets which display value text on screen, for instance through a separate label in close proximity to the value-displaying widget, it is still expected that implementors will expose the value text using the above API. </para>

<para> #AtkValue should NOT be implemented for widgets whose displayed value is not reflective of a meaningful amount. For instance, a progress pulse indicator whose value alternates between 0.0 and 1.0 to indicate that some process is still taking place should not implement #AtkValue because the current value does not reflect progress towards completion. </para> </refsect2> </refsect1>

<refsect1 id="ranges"> <title>On the subject of ranges</title> <para> In addition to providing the minimum and maximum values, implementors can optionally provide details about subranges associated with the widget. These details should be provided by the implementor when both of the following are communicated visually to the end user: </para> <itemizedlist> <listitem>The existence of distinct ranges such as "weak", "acceptable", and "strong" indicated by color, bar tick marks, and/or on-screen text.</listitem> <listitem>Where the current value stands within a given subrange, for instance illustrating progression from very "weak" towards nearly "acceptable" through changes in shade and/or position on the bar within the "weak" subrange.</listitem> </itemizedlist> <para> If both of the above do not apply to the widget, it should be sufficient to expose the numeric value, along with the value text if appropriate, to make the widget accessible. </para>

<refsect2 id="ranges-implementor-notes"> <title>Implementor Notes</title> <para> If providing subrange details is deemed necessary, all possible values of the widget are expected to fall within one of the subranges defined by the implementor. </para> </refsect2> </refsect1>

<refsect1 id="localization"> <title>On the subject of localization of end-user-consumable text values</title> <para> Because value text and subrange descriptors are human-consumable, implementors are expected to provide localized strings which can be directly presented to end users via their assistive technology. In order to simplify this for implementors, implementors can use atk_value_type_get_localized_name() with the following already-localized constants for commonly-needed values can be used: </para>

<itemizedlist> <listitem>ATK_VALUE_VERY_WEAK</listitem> <listitem>ATK_VALUE_WEAK</listitem> <listitem>ATK_VALUE_ACCEPTABLE</listitem> <listitem>ATK_VALUE_STRONG</listitem> <listitem>ATK_VALUE_VERY_STRONG</listitem> <listitem>ATK_VALUE_VERY_LOW</listitem> <listitem>ATK_VALUE_LOW</listitem> <listitem>ATK_VALUE_MEDIUM</listitem> <listitem>ATK_VALUE_HIGH</listitem> <listitem>ATK_VALUE_VERY_HIGH</listitem> <listitem>ATK_VALUE_VERY_BAD</listitem> <listitem>ATK_VALUE_BAD</listitem> <listitem>ATK_VALUE_GOOD</listitem> <listitem>ATK_VALUE_VERY_GOOD</listitem> <listitem>ATK_VALUE_BEST</listitem> <listitem>ATK_VALUE_SUBSUBOPTIMAL</listitem> <listitem>ATK_VALUE_SUBOPTIMAL</listitem> <listitem>ATK_VALUE_OPTIMAL</listitem> </itemizedlist> <para> Proposals for additional constants, along with their use cases, should be submitted to the GNOME Accessibility Team. </para> </refsect1>

<refsect1 id="changes"> <title>On the subject of changes</title> <para> Note that if there is a textual description associated with the new numeric value, that description should be included regardless of whether or not it has also changed. </para> </refsect1>

Members

Classes

OnValueChangedDelegateWrapper
class OnValueChangedDelegateWrapper
Undocumented in source.

Functions

addOnValueChanged
gulong addOnValueChanged(void delegate(double, string, ValueIF) dlg, ConnectFlags connectFlags)

The 'value-changed' signal is emitted when the current value that represent the object changes. @value is the numerical representation of this new value. @text is the human readable text alternative of @value, and can be NULL if it is not available. Note that if there is a textual description associated with the new numeric value, that description should be included regardless of whether or not it has also changed.

getCurrentValue
void getCurrentValue(Value value)

Gets the value of this object.

getIncrement
double getIncrement()

Gets the minimum increment by which the value of this object may be changed. If zero, the minimum increment is undefined, which may mean that it is limited only by the floating point precision of the platform.

getMaximumValue
void getMaximumValue(Value value)

Gets the maximum value of this object.

getMinimumIncrement
void getMinimumIncrement(Value value)

Gets the minimum increment by which the value of this object may be changed. If zero, the minimum increment is undefined, which may mean that it is limited only by the floating point precision of the platform.

getMinimumValue
void getMinimumValue(Value value)

Gets the minimum value of this object.

getRange
Range getRange()

Gets the range of this object.

getSubRanges
ListSG getSubRanges()

Gets the list of subranges defined for this object. See #AtkValue introduction for examples of subranges and when to expose them.

getValueAndText
void getValueAndText(double value, string text)

Gets the current value and the human readable text alternative of @obj. @text is a newly created string, that must be freed by the caller. Can be NULL if no descriptor is available.

getValueStruct
AtkValue* getValueStruct()

Get the main Gtk struct

internalRemoveOnValueChanged
void internalRemoveOnValueChanged(OnValueChangedDelegateWrapper source)
Undocumented in source. Be warned that the author may not have intended to support it.
setCurrentValue
bool setCurrentValue(Value value)

Sets the value of this object.

setValue
void setValue(double newValue)

Sets the value of this object.

Static functions

callBackValueChanged
void callBackValueChanged(AtkValue* valueStruct, double value, char* text, OnValueChangedDelegateWrapper wrapper)
Undocumented in source. Be warned that the author may not have intended to support it.
callBackValueChangedDestroy
void callBackValueChangedDestroy(OnValueChangedDelegateWrapper wrapper, GClosure* closure)
Undocumented in source. Be warned that the author may not have intended to support it.

Variables

onValueChangedListeners
OnValueChangedDelegateWrapper[] onValueChangedListeners;
Undocumented in source.

Meta