TextIF

#AtkText should be implemented by #AtkObjects on behalf of widgets that have text content which is either attributed or otherwise non-trivial. #AtkObjects whose text content is simple, unattributed, and very brief may expose that content via #atk_object_get_name instead; however if the text is editable, multi-line, typically longer than three or four words, attributed, selectable, or if the object already uses the 'name' ATK property for other information, the #AtkText interface should be used to expose the text content. In the case of editable text content, #AtkEditableText (a subtype of the #AtkText interface) should be implemented instead.

#AtkText provides not only traversal facilities and change notification for text content, but also caret tracking and glyph bounding box calculations. Note that the text strings are exposed as UTF-8, and are therefore potentially multi-byte, and caret-to-byte offset mapping makes no assumptions about the character length; also bounding box glyph-to-offset mapping may be complex for languages which use ligatures.

interface TextIF {

AtkText* getTextStruct();

void* getStruct();

static void freeRanges(AtkTextRange*[] ranges);

bool addSelection(int startOffset, int endOffset);

AtkTextRange*[] getBoundedRanges(AtkTextRectangle* rect, AtkCoordType coordType, AtkTextClipType xClipType, AtkTextClipType yClipType);

int getCaretOffset();

dchar getCharacterAtOffset(int offset);

int getCharacterCount();

void getCharacterExtents(int offset, int x, int y, int width, int height, AtkCoordType coords);

AtkAttributeSet* getDefaultAttributes();

int getNSelections();

int getOffsetAtPoint(int x, int y, AtkCoordType coords);

void getRangeExtents(int startOffset, int endOffset, AtkCoordType coordType, AtkTextRectangle rect);

AtkAttributeSet* getRunAttributes(int offset, int startOffset, int endOffset);

string getSelection(int selectionNum, int startOffset, int endOffset);

string getStringAtOffset(int offset, AtkTextGranularity granularity, int startOffset, int endOffset);

string getText(int startOffset, int endOffset);

string getTextAfterOffset(int offset, AtkTextBoundary boundaryType, int startOffset, int endOffset);

string getTextAtOffset(int offset, AtkTextBoundary boundaryType, int startOffset, int endOffset);

string getTextBeforeOffset(int offset, AtkTextBoundary boundaryType, int startOffset, int endOffset);

bool removeSelection(int selectionNum);

bool setCaretOffset(int offset);

bool setSelection(int selectionNum, int startOffset, int endOffset);

gulong addOnTextAttributesChanged(void delegate(TextIF) dlg, ConnectFlags connectFlags);

gulong addOnTextCaretMoved(void delegate(int, TextIF) dlg, ConnectFlags connectFlags);

gulong addOnTextChanged(void delegate(int, int, TextIF) dlg, ConnectFlags connectFlags);

gulong addOnTextInsert(void delegate(int, int, string, TextIF) dlg, ConnectFlags connectFlags);

gulong addOnTextRemove(void delegate(int, int, string, TextIF) dlg, ConnectFlags connectFlags);

gulong addOnTextSelectionChanged(void delegate(TextIF) dlg, ConnectFlags connectFlags);

static void attributeSetFree(AtkAttributeSet* attribSet);

static AtkTextAttribute attributeForName(string name);

static string attributeGetName(AtkTextAttribute attr);

static string attributeGetValue(AtkTextAttribute attr, int index);

static AtkTextAttribute attributeRegister(string name);

}

Members

Functions

addOnTextAttributesChanged gulong addOnTextAttributesChanged(void delegate(TextIF) dlg, ConnectFlags connectFlags): The "text-attributes-changed" signal is emitted when the text attributes of the text of an object which implements AtkText changes.
addOnTextCaretMoved gulong addOnTextCaretMoved(void delegate(int, TextIF) dlg, ConnectFlags connectFlags): The "text-caret-moved" signal is emitted when the caret position of the text of an object which implements AtkText changes.
addOnTextChanged gulong addOnTextChanged(void delegate(int, int, TextIF) dlg, ConnectFlags connectFlags): The "text-changed" signal is emitted when the text of the object which implements the AtkText interface changes, This signal will have a detail which is either "insert" or "delete" which identifies whether the text change was an insertion or a deletion.
addOnTextInsert gulong addOnTextInsert(void delegate(int, int, string, TextIF) dlg, ConnectFlags connectFlags): The "text-insert" signal is emitted when a new text is inserted. If the signal was not triggered by the user (e.g. typing or pasting text), the "system" detail should be included.
addOnTextRemove gulong addOnTextRemove(void delegate(int, int, string, TextIF) dlg, ConnectFlags connectFlags): The "text-remove" signal is emitted when a new text is removed. If the signal was not triggered by the user (e.g. typing or pasting text), the "system" detail should be included.
addOnTextSelectionChanged gulong addOnTextSelectionChanged(void delegate(TextIF) dlg, ConnectFlags connectFlags): The "text-selection-changed" signal is emitted when the selected text of an object which implements AtkText changes.
addSelection bool addSelection(int startOffset, int endOffset): Adds a selection bounded by the specified offsets.
getBoundedRanges AtkTextRange*[] getBoundedRanges(AtkTextRectangle* rect, AtkCoordType coordType, AtkTextClipType xClipType, AtkTextClipType yClipType): Get the ranges of text in the specified bounding box.
getCaretOffset int getCaretOffset(): Gets the offset position of the caret (cursor).
getCharacterAtOffset dchar getCharacterAtOffset(int offset): Gets the specified text.
getCharacterCount int getCharacterCount(): Gets the character count.
getCharacterExtents void getCharacterExtents(int offset, int x, int y, int width, int height, AtkCoordType coords): Get the bounding box containing the glyph representing the character at a particular text offset.
getDefaultAttributes AtkAttributeSet* getDefaultAttributes(): Creates an #AtkAttributeSet which consists of the default values of attributes for the text. See the enum AtkTextAttribute for types of text attributes that can be returned. Note that other attributes may also be returned.
getNSelections int getNSelections(): Gets the number of selected regions.
getOffsetAtPoint int getOffsetAtPoint(int x, int y, AtkCoordType coords): Gets the offset of the character located at coordinates @x and @y. @x and @y are interpreted as being relative to the screen or this widget's window depending on @coords.
getRangeExtents void getRangeExtents(int startOffset, int endOffset, AtkCoordType coordType, AtkTextRectangle rect): Get the bounding box for text within the specified range.
getRunAttributes AtkAttributeSet* getRunAttributes(int offset, int startOffset, int endOffset): Creates an #AtkAttributeSet which consists of the attributes explicitly set at the position @offset in the text. @start_offset and @end_offset are set to the start and end of the range around @offset where the attributes are invariant. Note that @end_offset is the offset of the first character after the range. See the enum AtkTextAttribute for types of text attributes that can be returned. Note that other attributes may also be returned.
getSelection string getSelection(int selectionNum, int startOffset, int endOffset): Gets the text from the specified selection.
getStringAtOffset string getStringAtOffset(int offset, AtkTextGranularity granularity, int startOffset, int endOffset): Gets a portion of the text exposed through an #AtkText according to a given @offset and a specific @granularity, along with the start and end offsets defining the boundaries of such a portion of text.
getStruct void* getStruct(): the main Gtk struct as a void*
getText string getText(int startOffset, int endOffset): Gets the specified text.
getTextAfterOffset string getTextAfterOffset(int offset, AtkTextBoundary boundaryType, int startOffset, int endOffset): Gets the specified text.
getTextAtOffset string getTextAtOffset(int offset, AtkTextBoundary boundaryType, int startOffset, int endOffset): Gets the specified text.
getTextBeforeOffset string getTextBeforeOffset(int offset, AtkTextBoundary boundaryType, int startOffset, int endOffset): Gets the specified text.
getTextStruct AtkText* getTextStruct(): Get the main Gtk struct
removeSelection bool removeSelection(int selectionNum): Removes the specified selection.
setCaretOffset bool setCaretOffset(int offset): Sets the caret (cursor) position to the specified @offset.
setSelection bool setSelection(int selectionNum, int startOffset, int endOffset): Changes the start and end offset of the specified selection.

Static functions

attributeForName AtkTextAttribute attributeForName(string name): Get the #AtkTextAttribute type corresponding to a text attribute name.
attributeGetName string attributeGetName(AtkTextAttribute attr): Gets the name corresponding to the #AtkTextAttribute
attributeGetValue string attributeGetValue(AtkTextAttribute attr, int index): Gets the value for the index of the #AtkTextAttribute
attributeRegister AtkTextAttribute attributeRegister(string name): Associate @name with a new #AtkTextAttribute
attributeSetFree void attributeSetFree(AtkAttributeSet* attribSet): Frees the memory used by an #AtkAttributeSet, including all its #AtkAttributes.
freeRanges void freeRanges(AtkTextRange*[] ranges): Frees the memory associated with an array of AtkTextRange. It is assumed that the array was returned by the function atk_text_get_bounded_ranges and is NULL terminated.

TextIF

Members

Functions

Static functions

Meta

Source