Sets our main struct and passes it to the parent class
The ::composited-changed signal is emitted when the composited status of the screen changes Since 2.10
The ::monitors-changed signal is emitted when the number, size or position of the monitors attached to the screen change. Only for X11 and OS X for now. A future implementation for Win32 may be a possibility. Since 2.14
The ::size-changed signal is emitted when the pixel width or height of a screen changes. Since 2.2
Returns the screen's currently active window. On X11, this is done by inspecting the _NET_ACTIVE_WINDOW property on the root window, as described in the Extended Window Manager Hints. If there is no currently currently active window, or the window manager does not support the _NET_ACTIVE_WINDOW hint, this function returns NULL. On other platforms, this function may return NULL, depending on whether it is implementable on that platform. The returned window should be unrefed using g_object_unref() when no longer needed. Since 2.10
Gets the display to which the screen belongs. Since 2.2
Gets any options previously set with gdk_screen_set_font_options(). Since 2.10
Gets the height of screen in pixels Since 2.2
Returns the height of screen in millimeters. Note that on some X servers this value will not be correct. Since 2.2
Returns the monitor number in which the point (x,y) is located. Since 2.2
Returns the number of the monitor in which the largest area of the bounding rectangle of window resides. Since 2.2
Retrieves the GdkRectangle representing the size and position of the individual monitor within the entire screen area. Monitor numbers start at 0. To obtain the number of monitors of screen, use gdk_screen_get_n_monitors(). Note that the size of the entire screen area can be retrieved via gdk_screen_get_width() and gdk_screen_get_height(). Since 2.2
Gets the height in millimeters of the specified monitor. Since 2.14
Returns the output name of the specified monitor. Usually something like VGA, DVI, or TV, not the actual product name of the display device. Since 2.14
Returns the internal scale factor that maps from monitor coordiantes to the actual device pixels. On traditional systems this is 1, but on very high density outputs this can be a higher value (often 2). This can be used if you want to create pixel based data for a particula monitor, but most of the time you're drawing to a window where it is better to use gdk_window_get_scale_factor() instead.
Gets the width in millimeters of the specified monitor, if available. Since 2.14
Retrieves the GdkRectangle representing the size and position of the "work area" on a monitor within the entire screen area. The work area should be considered when positioning menus and similar popups, to avoid placing them below panels, docks or other desktop components. Monitor numbers start at 0. To obtain the number of monitors of screen, use gdk_screen_get_n_monitors().
Returns the number of monitors which screen consists of. Since 2.2
Gets the index of screen among the screens in the display to which it belongs. (See gdk_screen_get_display()) Since 2.2
Gets the primary monitor for screen. The primary monitor is considered the monitor where the 'main desktop' lives. While normal application windows typically allow the window manager to place the windows, specialized desktop applications such as panels should place themselves on the primary monitor. If no primary monitor is configured by the user, the return value will be 0, defaulting to the first monitor. Since 2.20
Gets the resolution for font handling on the screen; see gdk_screen_set_resolution() for full details. Since 2.10
Gets a visual to use for creating windows with an alpha channel. The windowing system on which GTK+ is running may not support this capability, in which case NULL will be returned. Even if a non-NULL value is returned, its possible that the window's alpha channel won't be honored when displaying the window on the screen: in particular, for X an appropriate windowing manager and compositing manager must be running to provide appropriate display. This functionality is not implemented in the Windows backend. For setting an overall opacity for a top-level window, see gdk_window_set_opacity(). Since 2.8
Gets the root window of screen. Since 2.2
Get the main Gtk struct
Retrieves a desktop-wide setting such as double-click time for the GdkScreen screen. FIXME needs a list of valid settings here, or a link to more information. Since 2.2
the main Gtk struct as a void*
Get the system's default visual for screen. This is the visual for the root window of the display. The return value should not be freed. Since 2.2
Obtains a list of all toplevel windows known to GDK on the screen screen. A toplevel window is a child of the root window (see gdk_get_default_root_window()). The returned list should be freed with g_list_free(), but its elements need not be freed. Since 2.2
Gets the width of screen in pixels Since 2.2
Gets the width of screen in millimeters. Note that on some X servers this value will not be correct. Since 2.2
Returns a GList of GdkWindows representing the current window stack. On X11, this is done by inspecting the _NET_CLIENT_LIST_STACKING property on the root window, as described in the Extended Window Manager Hints. If the window manager does not support the _NET_CLIENT_LIST_STACKING hint, this function returns NULL. On other platforms, this function may return NULL, depending on whether it is implementable on that platform. The returned list is newly allocated and owns references to the windows it contains, so it should be freed using g_list_free() and its windows unrefed using g_object_unref() when no longer needed. Since 2.10
Returns whether windows with an RGBA visual can reasonably be expected to have their alpha channel drawn correctly on the screen. On X11 this function returns whether a compositing manager is compositing screen. Since 2.10
Lists the available visuals for the specified screen. A visual describes a hardware image data format. For example, a visual might support 24-bit color, or 8-bit color, and might expect pixels to be in a certain format. Call g_list_free() on the return value when you're finished with it. Since 2.2
Determines the name to pass to gdk_display_open() to get a GdkDisplay with this screen as the default screen. Since 2.2
Sets the default font options for the screen. These options will be set on any PangoContext's newly created with gdk_pango_context_get_for_screen(). Changing the default set of font options does not affect contexts that have already been created. Since 2.10
Sets the resolution for font handling on the screen. This is a scale factor between points specified in a PangoFontDescription and cairo units. The default value is 96, meaning that a 10 point font will be 13 units high. (10 * 96. / 72. = 13.3). Since 2.10
Gets the default screen for the default display. (See gdk_display_get_default()). Since 2.2
the main Gtk struct
the main Gtk struct
Get the main Gtk struct
the main Gtk struct as a void*
Gets a D Object from the objects table of associations.
The notify signal is emitted on an object when one of its properties has been changed. Note that getting this signal doesn't guarantee that the value of the property has actually changed, it may also be emitted when the setter for the property is called to reinstate the previous value.
Installs a new property. This is usually done in the class initializer. Note that it is possible to redefine a property in a derived class, by installing a property with the same name. This can be useful at times, e.g. to change the range of allowed values or the default value.
Installs new properties from an array of GParamSpecs. This is usually done in the class initializer. The property id of each property is the index of each GParamSpec in the pspecs array. The property id of 0 is treated specially by GObject and it should not be used to store a GParamSpec. This function should be used if you plan to use a static array of GParamSpecs and g_object_notify_by_pspec(). For instance, this Since 2.26
Looks up the GParamSpec for a property of a class.
Get an array of GParamSpec* for all properties of a class.
Registers property_id as referring to a property with the name name in a parent class or in an interface implemented by oclass. This allows this class to override a property implementation in a parent class or to provide the implementation of a property from an interface. Note Internally, overriding is implemented by creating a property of type GParamSpecOverride; generally operations that query the properties of the object class, such as g_object_class_find_property() or g_object_class_list_properties() will return the overridden property. However, in one case, the construct_properties argument of the constructor virtual function, the GParamSpecOverride is passed instead, so that the param_id field of the GParamSpec will be correct. For virtually all uses, this makes no difference. If you need to get the overridden property, you can call g_param_spec_get_redirect_target(). Since 2.4
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property. This function is meant to be called from the interface's default vtable initialization function (the class_init member of GTypeInfo.) It must not be called after after class_init has been called for any object types implementing this interface. Since 2.4
Find the GParamSpec with the given name for an interface. Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek(). Since 2.4
Lists the properties of an interface.Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek(). Since 2.4
Increases the reference count of object.
Decreases the reference count of object. When its reference count drops to 0, the object is finalized (i.e. its memory is freed).
Increase the reference count of object, and possibly remove the floating reference, if object has a floating reference. In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one. Since 2.10
Clears a reference to a GObject. object_ptr must not be NULL. If the reference is NULL then this function does nothing. Otherwise, the reference count of the object is decreased and the pointer is set to NULL. This function is threadsafe and modifies the pointer atomically, using memory barriers where needed. A macro is also included that allows this function to be used without pointer casts. Since 2.28
Checks whether object has a floating reference. Since 2.10
This function is intended for GObject implementations to re-enforce a floating object reference. Doing this is seldom required: all GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink(). Since 2.10
Adds a weak reference callback to an object. Weak references are used for notification when an object is finalized. They are called "weak references" because they allow you to safely hold a pointer to an object without calling g_object_ref() (g_object_ref() adds a strong reference, that is, forces the object to stay alive). Note that the weak references created by this method are not thread-safe: they cannot safely be used in one thread if the object's last g_object_unref() might happen in another thread. Use GWeakRef if thread-safety is required.
Removes a weak reference callback to an object.
Adds a weak reference from weak_pointer to object to indicate that the pointer located at weak_pointer_location is only valid during the lifetime of object. When the object is finalized, weak_pointer will be set to NULL. Note that as with g_object_weak_ref(), the weak references created by this method are not thread-safe: they cannot safely be used in one thread if the object's last g_object_unref() might happen in another thread. Use GWeakRef if thread-safety is required.
Removes a weak reference from object that was previously added using g_object_add_weak_pointer(). The weak_pointer_location has to match the one used with g_object_add_weak_pointer().
Increases the reference count of the object by one and sets a callback to be called when all other references to the object are dropped, or when this is already the last reference to the object and another reference is established. This functionality is intended for binding object to a proxy object managed by another memory manager. This is done with two paired references: the strong reference added by g_object_add_toggle_ref() and a reverse reference to the proxy object which is either a strong reference or weak reference. The setup is that when there are no other references to object, only a weak reference is held in the reverse direction from object to the proxy object, but when there are other references held to object, a strong reference is held. The notify callback is called when the reference from object to the proxy object should be toggled from strong to weak (is_last_ref true) or weak to strong (is_last_ref false). Since a (normal) reference must be held to the object before calling g_object_add_toggle_ref(), the initial state of the reverse link is always strong. Multiple toggle references may be added to the same gobject, however if there are multiple toggle references to an object, none of them will ever be notified until all but one are removed. For this reason, you should only ever use a toggle reference if there is important state in the proxy object. Since 2.8
Removes a reference added with g_object_add_toggle_ref(). The reference count of the object is decreased by one. Since 2.8
Emits a "notify" signal for the property property_name on object. When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Emits a "notify" signal for the property specified by pspec on object. This function omits the property name lookup, hence it is faster than g_object_notify(). One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with Since 2.26
Increases the freeze count on object. If the freeze count is non-zero, the emission of "notify" signals on object is stopped. The signals are queued until the freeze count is decreased to zero. Duplicate notifications are squashed so that at most one "notify" signal is emitted for each property modified while the object is frozen. This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Reverts the effect of a previous call to g_object_freeze_notify(). The freeze count is decreased on object and when it reaches zero, queued "notify" signals are emitted. Duplicate notifications for each property are squashed so that at most one "notify" signal is emitted for each property. It is an error to call this function when the freeze count is zero.
Gets a named field from the objects table of associations (see g_object_set_data()).
Each object carries around a table of associations from strings to pointers. This function lets you set an association. If the object already had an association with that name, the old association will be destroyed.
Like g_object_set_data() except it adds notification for when the association is destroyed, either by setting it to a different value or when the object is destroyed. Note that the destroy callback is not called if data is NULL.
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
This is a variant of g_object_get_data() which returns a 'duplicate' of the value. dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object. If the key is not set on the object then dup_func will be called with a NULL argument. Note that dup_func is called while user data of object is locked. This function can be useful to avoid races when multiple threads are using object data on the same key on the same object. Since 2.34
Compares the user data for the key key on object with oldval, and if they are the same, replaces oldval with newval. This is like a typical atomic compare-and-exchange operation, for user data on an object. If the previous value was replaced then ownership of the old value (oldval) is passed to the caller, including the registered destroy notify for it (passed out in old_destroy). Its up to the caller to free this as he wishes, which may or may not include using old_destroy as sometimes replacement should not destroy the object in the normal way. Return: TRUE if the existing value for key was replaced by newval, FALSE otherwise. Since 2.34
This function gets back user data pointers stored via g_object_set_qdata().
This sets an opaque, named pointer on an object. The name is specified through a GQuark (retrived e.g. via g_quark_from_static_string()), and the pointer can be gotten back from the object with g_object_get_qdata() until the object is finalized. Setting a previously set user data pointer, overrides (frees) the old pointer set, using NULL as pointer essentially removes the data stored.
This function works like g_object_set_qdata(), but in addition, a void (*destroy) (gpointer) function may be specified which is called with data as argument when the object is finalized, or the data is being overwritten by a call to g_object_set_qdata() with the same quark.
This function gets back user data pointers stored via g_object_set_qdata() and removes the data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update
This is a variant of g_object_get_qdata() which returns a 'duplicate' of the value. dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object. If the quark is not set on the object then dup_func will be called with a NULL argument. Note that dup_func is called while user data of object is locked. This function can be useful to avoid races when multiple threads are using object data on the same key on the same object. Since 2.34
Compares the user data for the key quark on object with oldval, and if they are the same, replaces oldval with newval. This is like a typical atomic compare-and-exchange operation, for user data on an object. If the previous value was replaced then ownership of the old value (oldval) is passed to the caller, including the registered destroy notify for it (passed out in old_destroy). Its up to the caller to free this as he wishes, which may or may not include using old_destroy as sometimes replacement should not destroy the object in the normal way. Return: TRUE if the existing value for quark was replaced by newval, FALSE otherwise. Since 2.34
Sets a property on an object.
Gets a property of an object. value must have been initialized to the expected type of the property (or a type to which the expected type can be transformed) using g_value_init(). In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset(). Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
Sets properties on an object.
Gets properties of an object. In general, a copy is made of the property contents and the caller is responsible for freeing the memory in the appropriate manner for the type, for instance by calling g_free() or g_object_unref(). See g_object_get().
This function essentially limits the life time of the closure to the life time of the object. That is, when the object is finalized, the closure is invalidated by calling g_closure_invalidate() on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, g_object_ref() and g_object_unref() are added as marshal guards to the closure, to ensure that an extra reference count is held on object during invocation of the closure. Usually, this function will be called on closures that use this object as closure data.
Releases all references to other objects. This can be used to break reference cycles. This functions should only be called from object system implementations.
GdkScreen objects are the GDK representation of the screen on which windows can be displayed and on which the pointer moves. X originally identified screens with physical screens, but nowadays it is more common to have a single GdkScreen which combines several physical monitors (see gdk_screen_get_n_monitors()).
GdkScreen is used throughout GDK and GTK+ to specify which screen the top level windows are to be displayed on. it is also used to query the screen specification and default settings such as the default visual (gdk_screen_get_system_visual()), the dimensions of the physical monitors (gdk_screen_get_monitor_geometry()), etc.