Sets our main struct and passes it to the parent class
Creates a new GtkAccelGroup.
Finds the first accelerator in accel_group that matches accel_key and accel_mods, and activates it.
The accel-activate signal is an implementation detail of GtkAccelGroup and not meant to be used by applications. TRUE if the accelerator was activated
The accel-changed signal is emitted when an entry is added to or removed from the accel group. Widgets like GtkAccelLabel which display an associated accelerator should connect to this signal, and rebuild their visual representation if the accel_closure is theirs. See Also gtk_window_add_accel_group(), gtk_accel_map_change_entry(), gtk_item_factory_new(), gtk_label_new_with_mnemonic()
Installs an accelerator in this group. When accel_group is being activated in response to a call to gtk_accel_groups_activate(), closure will be invoked if the accel_key and accel_mods from gtk_accel_groups_activate() match those of this connection. The signature used for the closure is that of GtkAccelGroupActivate. Note that, due to implementation details, a single closure can only be connected to one accelerator group.
Installs an accelerator in this group, using an accelerator path to look up the appropriate key and modifiers (see gtk_accel_map_add_entry()). When accel_group is being activated in response to a call to gtk_accel_groups_activate(), closure will be invoked if the accel_key and accel_mods from gtk_accel_groups_activate() match the key and modifiers for the path. The signature used for the closure is that of GtkAccelGroupActivate. Note that accel_path string will be stored in a GQuark. Therefore, if you pass a static string, you can save some memory by interning it first with g_intern_static_string().
Removes an accelerator previously installed through gtk_accel_group_connect(). Since 2.20 closure can be NULL.
Removes an accelerator previously installed through gtk_accel_group_connect().
Finds the first entry in an accelerator group for which find_func returns TRUE and returns its GtkAccelKey.
Locks are added and removed using gtk_accel_group_lock() and gtk_accel_group_unlock(). Since 2.14
Gets a GdkModifierType representing the mask for this accel_group. For example, GDK_CONTROL_MASK, GDK_SHIFT_MASK, etc. Since 2.14
the main Gtk struct as a void*
Locks the given accelerator group. Locking an acelerator group prevents the accelerators contained within it to be changed during runtime. Refer to gtk_accel_map_change_entry() about runtime accelerator changes. If called more than once, accel_group remains locked until gtk_accel_group_unlock() has been called an equivalent number of times.
Undoes the last call to gtk_accel_group_lock() on this accel_group.
Finds the first accelerator in any GtkAccelGroup attached to object that matches accel_key and accel_mods, and activates that accelerator.
Gets a list of all accel groups which are attached to object.
Gets the value set by gtk_accelerator_set_default_mod_mask().
Converts an accelerator keyval and modifier mask into a string which can be used to represent the accelerator to the user. Since 2.6
Converts an accelerator keyval and modifier mask into a (possibly translated) string that can be displayed to a user, similarly to gtk_accelerator_get_label(), but handling keycodes. This is only useful for system-level components, applications should use gtk_accelerator_parse() instead.
Converts an accelerator keyval and modifier mask into a string parseable by gtk_accelerator_parse(). For example, if you pass in GDK_KEY_q and GDK_CONTROL_MASK, this function returns "<Control>q". If you need to display accelerators in the user interface, see gtk_accelerator_get_label().
Converts an accelerator keyval and modifier mask into a string parseable by gtk_accelerator_parse_full(), similarly to gtk_accelerator_name() but handling keycodes. This is only useful for system-level components, applications should use gtk_accelerator_parse() instead.
Parses a string representing an accelerator. The format looks like "<Control>a" or "<Shift><Alt>F1" or "<Release>z" (the last one is for key release). The parser is fairly liberal and allows lower or upper case, and also abbreviations such as "<Ctl>" and "<Ctrl>". Key names are parsed using gdk_keyval_from_name(). For character keys the name is not the symbol, but the lowercase name, e.g. one would use "<Ctrl>minus" instead of "<Ctrl>-". If the parse fails, accelerator_key and accelerator_mods will be set to 0 (zero).
Parses a string representing an accelerator, similarly to gtk_accelerator_parse() but handles keycodes as well. This is only useful for system-level components, applications should use gtk_accelerator_parse() instead. If accelerator_codes is given and the result stored in it is non-NULL, the result must be freed with g_free(). If a keycode is present in the accelerator and no accelerator_codes is given, the parse will fail. If the parse fails, accelerator_key, accelerator_mods and accelerator_codes will be set to 0 (zero).
Sets the modifiers that will be considered significant for keyboard accelerators. The default mod mask is GDK_CONTROL_MASK | GDK_SHIFT_MASK | GDK_MOD1_MASK | GDK_SUPER_MASK | GDK_HYPER_MASK | GDK_META_MASK, that is, Control, Shift, Alt, Super, Hyper and Meta. Other modifiers will by default be ignored by GtkAccelGroup. You must include at least the three modifiers Control, Shift and Alt in any value you pass to this function. The default mod mask should be changed on application startup, before using any accelerator groups.
Determines whether a given keyval and modifier mask constitute a valid keyboard accelerator. For example, the GDK_KEY_a keyval plus GDK_CONTROL_MASK is valid - this is a "Ctrl+a" accelerator. But, you can't, for instance, use the GDK_KEY_Control_L keyval as an accelerator.
Finds the GtkAccelGroup to which closure is connected; see gtk_accel_group_connect().
the main Gtk struct
the main Gtk struct
the main Gtk struct as a void*
Gets a D Object from the objects table of associations.
The notify signal is emitted on an object when one of its properties has been changed. Note that getting this signal doesn't guarantee that the value of the property has actually changed, it may also be emitted when the setter for the property is called to reinstate the previous value.
Installs a new property. This is usually done in the class initializer. Note that it is possible to redefine a property in a derived class, by installing a property with the same name. This can be useful at times, e.g. to change the range of allowed values or the default value.
Installs new properties from an array of GParamSpecs. This is usually done in the class initializer. The property id of each property is the index of each GParamSpec in the pspecs array. The property id of 0 is treated specially by GObject and it should not be used to store a GParamSpec. This function should be used if you plan to use a static array of GParamSpecs and g_object_notify_by_pspec(). For instance, this Since 2.26
Looks up the GParamSpec for a property of a class.
Get an array of GParamSpec* for all properties of a class.
Registers property_id as referring to a property with the name name in a parent class or in an interface implemented by oclass. This allows this class to override a property implementation in a parent class or to provide the implementation of a property from an interface. Note Internally, overriding is implemented by creating a property of type GParamSpecOverride; generally operations that query the properties of the object class, such as g_object_class_find_property() or g_object_class_list_properties() will return the overridden property. However, in one case, the construct_properties argument of the constructor virtual function, the GParamSpecOverride is passed instead, so that the param_id field of the GParamSpec will be correct. For virtually all uses, this makes no difference. If you need to get the overridden property, you can call g_param_spec_get_redirect_target(). Since 2.4
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property. This function is meant to be called from the interface's default vtable initialization function (the class_init member of GTypeInfo.) It must not be called after after class_init has been called for any object types implementing this interface. Since 2.4
Find the GParamSpec with the given name for an interface. Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek(). Since 2.4
Lists the properties of an interface.Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek(). Since 2.4
Increases the reference count of object.
Decreases the reference count of object. When its reference count drops to 0, the object is finalized (i.e. its memory is freed).
Increase the reference count of object, and possibly remove the floating reference, if object has a floating reference. In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one. Since 2.10
Clears a reference to a GObject. object_ptr must not be NULL. If the reference is NULL then this function does nothing. Otherwise, the reference count of the object is decreased and the pointer is set to NULL. This function is threadsafe and modifies the pointer atomically, using memory barriers where needed. A macro is also included that allows this function to be used without pointer casts. Since 2.28
Checks whether object has a floating reference. Since 2.10
This function is intended for GObject implementations to re-enforce a floating object reference. Doing this is seldom required: all GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink(). Since 2.10
Adds a weak reference callback to an object. Weak references are used for notification when an object is finalized. They are called "weak references" because they allow you to safely hold a pointer to an object without calling g_object_ref() (g_object_ref() adds a strong reference, that is, forces the object to stay alive). Note that the weak references created by this method are not thread-safe: they cannot safely be used in one thread if the object's last g_object_unref() might happen in another thread. Use GWeakRef if thread-safety is required.
Removes a weak reference callback to an object.
Adds a weak reference from weak_pointer to object to indicate that the pointer located at weak_pointer_location is only valid during the lifetime of object. When the object is finalized, weak_pointer will be set to NULL. Note that as with g_object_weak_ref(), the weak references created by this method are not thread-safe: they cannot safely be used in one thread if the object's last g_object_unref() might happen in another thread. Use GWeakRef if thread-safety is required.
Removes a weak reference from object that was previously added using g_object_add_weak_pointer(). The weak_pointer_location has to match the one used with g_object_add_weak_pointer().
Increases the reference count of the object by one and sets a callback to be called when all other references to the object are dropped, or when this is already the last reference to the object and another reference is established. This functionality is intended for binding object to a proxy object managed by another memory manager. This is done with two paired references: the strong reference added by g_object_add_toggle_ref() and a reverse reference to the proxy object which is either a strong reference or weak reference. The setup is that when there are no other references to object, only a weak reference is held in the reverse direction from object to the proxy object, but when there are other references held to object, a strong reference is held. The notify callback is called when the reference from object to the proxy object should be toggled from strong to weak (is_last_ref true) or weak to strong (is_last_ref false). Since a (normal) reference must be held to the object before calling g_object_add_toggle_ref(), the initial state of the reverse link is always strong. Multiple toggle references may be added to the same gobject, however if there are multiple toggle references to an object, none of them will ever be notified until all but one are removed. For this reason, you should only ever use a toggle reference if there is important state in the proxy object. Since 2.8
Removes a reference added with g_object_add_toggle_ref(). The reference count of the object is decreased by one. Since 2.8
Emits a "notify" signal for the property property_name on object. When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Emits a "notify" signal for the property specified by pspec on object. This function omits the property name lookup, hence it is faster than g_object_notify(). One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with Since 2.26
Increases the freeze count on object. If the freeze count is non-zero, the emission of "notify" signals on object is stopped. The signals are queued until the freeze count is decreased to zero. Duplicate notifications are squashed so that at most one "notify" signal is emitted for each property modified while the object is frozen. This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Reverts the effect of a previous call to g_object_freeze_notify(). The freeze count is decreased on object and when it reaches zero, queued "notify" signals are emitted. Duplicate notifications for each property are squashed so that at most one "notify" signal is emitted for each property. It is an error to call this function when the freeze count is zero.
Gets a named field from the objects table of associations (see g_object_set_data()).
Each object carries around a table of associations from strings to pointers. This function lets you set an association. If the object already had an association with that name, the old association will be destroyed.
Like g_object_set_data() except it adds notification for when the association is destroyed, either by setting it to a different value or when the object is destroyed. Note that the destroy callback is not called if data is NULL.
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
This is a variant of g_object_get_data() which returns a 'duplicate' of the value. dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object. If the key is not set on the object then dup_func will be called with a NULL argument. Note that dup_func is called while user data of object is locked. This function can be useful to avoid races when multiple threads are using object data on the same key on the same object. Since 2.34
Compares the user data for the key key on object with oldval, and if they are the same, replaces oldval with newval. This is like a typical atomic compare-and-exchange operation, for user data on an object. If the previous value was replaced then ownership of the old value (oldval) is passed to the caller, including the registered destroy notify for it (passed out in old_destroy). Its up to the caller to free this as he wishes, which may or may not include using old_destroy as sometimes replacement should not destroy the object in the normal way. Return: TRUE if the existing value for key was replaced by newval, FALSE otherwise. Since 2.34
This function gets back user data pointers stored via g_object_set_qdata().
This sets an opaque, named pointer on an object. The name is specified through a GQuark (retrived e.g. via g_quark_from_static_string()), and the pointer can be gotten back from the object with g_object_get_qdata() until the object is finalized. Setting a previously set user data pointer, overrides (frees) the old pointer set, using NULL as pointer essentially removes the data stored.
This function works like g_object_set_qdata(), but in addition, a void (*destroy) (gpointer) function may be specified which is called with data as argument when the object is finalized, or the data is being overwritten by a call to g_object_set_qdata() with the same quark.
This function gets back user data pointers stored via g_object_set_qdata() and removes the data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update
This is a variant of g_object_get_qdata() which returns a 'duplicate' of the value. dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object. If the quark is not set on the object then dup_func will be called with a NULL argument. Note that dup_func is called while user data of object is locked. This function can be useful to avoid races when multiple threads are using object data on the same key on the same object. Since 2.34
Compares the user data for the key quark on object with oldval, and if they are the same, replaces oldval with newval. This is like a typical atomic compare-and-exchange operation, for user data on an object. If the previous value was replaced then ownership of the old value (oldval) is passed to the caller, including the registered destroy notify for it (passed out in old_destroy). Its up to the caller to free this as he wishes, which may or may not include using old_destroy as sometimes replacement should not destroy the object in the normal way. Return: TRUE if the existing value for quark was replaced by newval, FALSE otherwise. Since 2.34
Sets a property on an object.
Gets a property of an object. value must have been initialized to the expected type of the property (or a type to which the expected type can be transformed) using g_value_init(). In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset(). Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
Sets properties on an object.
Gets properties of an object. In general, a copy is made of the property contents and the caller is responsible for freeing the memory in the appropriate manner for the type, for instance by calling g_free() or g_object_unref(). See g_object_get().
This function essentially limits the life time of the closure to the life time of the object. That is, when the object is finalized, the closure is invalidated by calling g_closure_invalidate() on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, g_object_ref() and g_object_unref() are added as marshal guards to the closure, to ensure that an extra reference count is held on object during invocation of the closure. Usually, this function will be called on closures that use this object as closure data.
Releases all references to other objects. This can be used to break reference cycles. This functions should only be called from object system implementations.
A GtkAccelGroup represents a group of keyboard accelerators, typically attached to a toplevel GtkWindow (with gtk_window_add_accel_group()). Usually you won't need to create a GtkAccelGroup directly; instead, when using GtkUIManager, GTK+ automatically sets up the accelerators for your menus in the ui manager's GtkAccelGroup.
Note that accelerators are different from mnemonics. Accelerators are shortcuts for activating a menu item; they appear alongside the menu item they're a shortcut for. For example "Ctrl+Q" might appear alongside the "Quit" menu item. Mnemonics are shortcuts for GUI elements such as text entries or buttons; they appear as underlined characters. See gtk_label_new_with_mnemonic(). Menu items can have both accelerators and mnemonics, of course.