Sets our main struct and passes it to the parent class
Creates a new GtkAssistant. Since 2.10
Adds a widget to the action area of a GtkAssistant. Since 2.10
The ::apply signal is emitted when the apply button is clicked. The default behavior of the GtkAssistant is to switch to the page after the current page, unless the current page is the last one. A handler for the ::apply signal should carry out the actions for which the wizard has collected data. If the action takes a long time to complete, you might consider putting a page of type GTK_ASSISTANT_PAGE_PROGRESS after the confirmation page and handle this operation within the "prepare" signal of the progress page. Since 2.10
The ::cancel signal is emitted when then the cancel button is clicked. Since 2.10
The ::close signal is emitted either when the close button of a summary page is clicked, or when the apply button in the last page in the flow (of type GTK_ASSISTANT_PAGE_CONFIRM) is clicked. Since 2.10
The ::prepare signal is emitted when a new page is set as the assistant's current page, before making the new page visible. A handler for this signal can do any preparations which are necessary before showing page. Since 2.10
Appends a page to the assistant. Since 2.10
Erases the visited page history so the back button is not shown on the current page, and removes the cancel button from subsequent pages. Use this when the information provided up to the current page is hereafter deemed permanent and cannot be modified or undone. For example, showing a progress page to track a long-running, unreversible operation after the user has clicked apply on a confirmation page. Since 2.22
Returns the page number of the current page. Since 2.10
Returns the number of pages in the assistant Since 2.10
Returns the child widget contained in page number page_num. Since 2.10
Gets whether page is complete. Since 2.10
Warning gtk_assistant_get_page_header_image has been deprecated since version 3.2 and should not be used in newly-written code. Since GTK+ 3.2, a header is no longer shown; add your header decoration to the page content instead. Gets the header image for page. Since 2.10
Warning gtk_assistant_get_page_side_image has been deprecated since version 3.2 and should not be used in newly-written code. Since GTK+ 3.2, sidebar images are not shown anymore. Gets the side image for page. Since 2.10
Gets the title for page. Since 2.10
Gets the page type of page. Since 2.10
the main Gtk struct as a void*
Inserts a page in the assistant at a given position. Since 2.10
Navigate to the next page. It is a programming error to call this function when there is no next page. This function is for use when creating pages of the GTK_ASSISTANT_PAGE_CUSTOM type.
Prepends a page to the assistant. Since 2.10
Navigate to the previous visited page. It is a programming error to call this function when no previous page is available. This function is for use when creating pages of the GTK_ASSISTANT_PAGE_CUSTOM type. Since 2.10
Removes a widget from the action area of a GtkAssistant. Since 2.10
Removes the page_num's page from assistant.
Switches the page to page_num. Note that this will only be necessary in custom buttons, as the assistant flow can be set with gtk_assistant_set_forward_page_func(). Since 2.10
Sets the page forwarding function to be page_func. This function will be used to determine what will be the next page when the user presses the forward button. Setting page_func to NULL will make the assistant to use the default forward function, which just goes to the next visible page. Since 2.10
Sets whether page contents are complete. This will make assistant update the buttons state to be able to continue the task. Since 2.10
Warning gtk_assistant_set_page_header_image has been deprecated since version 3.2 and should not be used in newly-written code. Since GTK+ 3.2, a header is no longer shown; add your header decoration to the page content instead. Sets a header image for page. Since 2.10
Warning gtk_assistant_set_page_side_image has been deprecated since version 3.2 and should not be used in newly-written code. Since GTK+ 3.2, sidebar images are not shown anymore. Sets a side image for page. This image used to be displayed in the side area of the assistant when page is the current page. Since 2.10
Sets a title for page. The title is displayed in the header area of the assistant when page is the current page. Since 2.10
Sets the page type for page. The page type determines the page behavior in the assistant. Since 2.10
Forces assistant to recompute the buttons state. GTK+ automatically takes care of this in most situations, e.g. when the user goes to a different page, or when the visibility or completeness of a page changes. One situation where it can be necessary to call this function is when changing a value on the current page affects the future page flow of the assistant. Since 2.10
the main Gtk struct
the main Gtk struct
the main Gtk struct as a void*
Move the window to an absolute position. just calls move(int, int). convinience because GdkEvent structs return the position coords as doubles
The ::activate-default signal is a keybinding signal which gets emitted when the user activates the default widget of window.
The ::activate-focus signal is a keybinding signal which gets emitted when the user activates the currently focused widget of window.
The ::keys-changed signal gets emitted when the set of accelerators or mnemonics that are associated with window changes.
Sets the title of the GtkWindow. The title of a window will be displayed in its title bar; on the X Window System, the title bar is rendered by the window manager, so exactly how the title appears to users may vary according to a user's exact configuration. The title should help a user distinguish this window from other windows they may have open. A good title might include the application name and current document filename, for example.
Don't use this function. It sets the X Window System "class" and "name" hints for a window. According to the ICCCM, you should always set these to the same value for all windows in an application, and GTK+ sets them to that value by default, so calling this function is sort of pointless. However, you may want to call gtk_window_set_role() on each window in your application, for the benefit of the session manager. Setting the role allows the window manager to restore window positions when loading a saved session.
Sets whether the user can resize a window. Windows are user resizable by default.
Gets the value set by gtk_window_set_resizable().
Associate accel_group with window, such that calling gtk_accel_groups_activate() on window will activate accelerators in accel_group.
Reverses the effects of gtk_window_add_accel_group().
Activates the current focused widget within the window.
Activates the default widget for the window, unless the current focused widget has been configured to receive the default action (see gtk_widget_set_receives_default()), in which case the focused widget is activated.
Sets a window modal or non-modal. Modal windows prevent interaction with other windows in the same application. To keep modal dialogs on top of main application windows, use gtk_window_set_transient_for() to make the dialog transient for the parent; most window managers will then disallow lowering the dialog below the parent.
Sets the default size of a window. If the window's "natural" size (its size request) is larger than the default, the default will be ignored. More generally, if the default size does not obey the geometry hints for the window (gtk_window_set_geometry_hints() can be used to set these explicitly), the default size will be clamped to the nearest permitted size. Unlike gtk_widget_set_size_request(), which sets a size request for a widget and thus would keep users from shrinking the window, this function only sets the initial size, just as if the user had resized the window themselves. Users can still shrink the window again as they normally would. Setting a default size of -1 means to use the "natural" default size (the size request of the window). For more control over a window's initial size and how resizing works, investigate gtk_window_set_geometry_hints(). For some uses, gtk_window_resize() is a more appropriate function. gtk_window_resize() changes the current size of the window, rather than the size to be used on initial display. gtk_window_resize() always affects the window itself, not the geometry widget. The default size of a window only affects the first time a window is shown; if a window is hidden and re-shown, it will remember the size it had prior to hiding, rather than using the default size. Windows can't actually be 0x0 in size, they must be at least 1x1, but passing 0 for width and height is OK, resulting in a 1x1 default size.
Like gtk_window_set_default_size(), but width and height are interpreted in terms of the base size and increment set with gtk_window_set_geometry_hints.
This function sets up hints about how a window can be resized by the user. You can set a minimum and maximum size; allowed resize increments (e.g. for xterm, you can only resize by the size of a character); aspect ratios; and more. See the GdkGeometry struct.
Window gravity defines the meaning of coordinates passed to gtk_window_move(). See gtk_window_move() and GdkGravity for more details. The default window gravity is GDK_GRAVITY_NORTH_WEST which will typically "do what you mean."
Gets the value set by gtk_window_set_gravity().
Sets a position constraint for this window. If the old or new constraint is GTK_WIN_POS_CENTER_ALWAYS, this will also cause the window to be repositioned to satisfy the new constraint.
Dialog windows should be set transient for the main application window they were spawned from. This allows window managers to e.g. keep the dialog on top of the main window, or center the dialog over the main window. gtk_dialog_new_with_buttons() and other convenience functions in GTK+ will sometimes call gtk_window_set_transient_for() on your behalf. Passing NULL for parent unsets the current transient window. On Windows, this function puts the child window on top of the parent, much as the window manager would have done on X.
Marks window as attached to attach_widget. This creates a logical binding between the window and the widget it belongs to, which is used by GTK+ to propagate information such as styling or accessibility to window as if it was a children of attach_widget. Examples of places where specifying this relation is useful are for instance a GtkMenu created by a GtkComboBox, a completion popup window created by GtkEntry or a typeahead search entry created by GtkTreeView. Note that this function should not be confused with gtk_window_set_transient_for(), which specifies a window manager relation between two toplevels instead. Passing NULL for attach_widget detaches the window.
If setting is TRUE, then destroying the transient parent of window will also destroy window itself. This is useful for dialogs that shouldn't persist beyond the lifetime of the main window they're associated with, for example.
If setting is TRUE, then window will request that it's titlebar should be hidden when maximized. This is useful for windows that don't convey any information other than the application name in the titlebar, to put the available screen space to better use. If the underlying window system does not support the request, the setting will not have any effect.
Sets the GdkScreen where the window is displayed; if the window is already mapped, it will be unmapped, and then remapped on the new screen. Since 2.2
Returns the GdkScreen associated with window. Since 2.2
Returns whether the window is part of the current active toplevel. (That is, the toplevel window receiving keystrokes.) The return value is TRUE if the window is active toplevel itself, but also if it is, say, a GtkPlug embedded in the active toplevel. You might use this function if you wanted to draw a widget differently in an active window from a widget in an inactive window. See gtk_window_has_toplevel_focus() Since 2.4
Returns whether the input focus is within this GtkWindow. For real toplevel windows, this is identical to gtk_window_is_active(), but for embedded windows, like GtkPlug, the results will differ. Since 2.4
Returns a list of all existing toplevel windows. The widgets in the list are not individually referenced. If you want to iterate through the list and perform actions involving callbacks that might destroy the widgets, you must call g_list_foreach (result, (GFunc)g_object_ref, NULL) first, and then unref all the widgets afterwards.
Adds a mnemonic to this window.
Removes a mnemonic from this window.
Activates the targets associated with the mnemonic.
Activates mnemonics and accelerators for this GtkWindow. This is normally called by the default ::key_press_event handler for toplevel windows, however in some cases it may be useful to call this directly when overriding the standard key handling for a toplevel window. Since 2.4
Propagate a key press or release event to the focus widget and up the focus container chain until a widget handles event. This is normally called by the default ::key_press_event and ::key_release_event handlers for toplevel windows, however in some cases it may be useful to call this directly when overriding the standard key handling for a toplevel window. Since 2.4
Retrieves the current focused widget within the window. Note that this is the widget that would have the focus if the toplevel window focused; if the toplevel window is not focused then gtk_widget_has_focus (widget) will not be TRUE for the widget.
If focus is not the current focus widget, and is focusable, sets it as the focus widget for the window. If focus is NULL, unsets the focus widget for this window. To set the focus to a particular widget in the toplevel, it is usually more convenient to use gtk_widget_grab_focus() instead of this function.
Returns the default widget for window. See gtk_window_set_default() for more details. Since 2.14
The default widget is the widget that's activated when the user presses Enter in a dialog (for example). This function sets or unsets the default widget for a GtkWindow about. When setting (rather than unsetting) the default widget it's generally easier to call gtk_widget_grab_focus() on the widget. Before making a widget the default widget, you must call gtk_widget_set_can_default() on the widget you'd like to make the default.
Presents a window to the user. This may mean raising the window in the stacking order, deiconifying it, moving it to the current desktop, and/or giving it the keyboard focus, possibly dependent on the user's platform, window manager, and preferences. If window is hidden, this function calls gtk_widget_show() as well. This function should be used when the user tries to open a window that's already open. Say for example the preferences dialog is currently open, and the user chooses Preferences from the menu a second time; use gtk_window_present() to move the already-open dialog where the user can see it. If you are calling this function in response to a user interaction, it is preferable to use gtk_window_present_with_time().
Presents a window to the user in response to a user interaction. If you need to present a window without a timestamp, use gtk_window_present(). See gtk_window_present() for details. Since 2.8
Requests that the window is closed, similar to what happens when a window manager close button is clicked. This function can be used with close buttons in custom titlebars.
Asks to iconify (i.e. minimize) the specified window. Note that you shouldn't assume the window is definitely iconified afterward, because other entities (e.g. the user or window manager) could deiconify it again, or there may not be a window manager in which case iconification isn't possible, etc. But normally the window will end up iconified. Just don't write code that crashes if not. It's permitted to call this function before showing a window, in which case the window will be iconified before it ever appears onscreen. You can track iconification via the "window-state-event" signal on GtkWidget.
Asks to deiconify (i.e. unminimize) the specified window. Note that you shouldn't assume the window is definitely deiconified afterward, because other entities (e.g. the user or window manager) could iconify it again before your code which assumes deiconification gets to run. You can track iconification via the "window-state-event" signal on GtkWidget.
Asks to stick window, which means that it will appear on all user desktops. Note that you shouldn't assume the window is definitely stuck afterward, because other entities (e.g. the user or window manager) could unstick it again, and some window managers do not support sticking windows. But normally the window will end up stuck. Just don't write code that crashes if not. It's permitted to call this function before showing a window. You can track stickiness via the "window-state-event" signal on GtkWidget.
Asks to unstick window, which means that it will appear on only one of the user's desktops. Note that you shouldn't assume the window is definitely unstuck afterward, because other entities (e.g. the user or window manager) could stick it again. But normally the window will end up stuck. Just don't write code that crashes if not. You can track stickiness via the "window-state-event" signal on GtkWidget.
Asks to maximize window, so that it becomes full-screen. Note that you shouldn't assume the window is definitely maximized afterward, because other entities (e.g. the user or window manager) could unmaximize it again, and not all window managers support maximization. But normally the window will end up maximized. Just don't write code that crashes if not. It's permitted to call this function before showing a window, in which case the window will be maximized when it appears onscreen initially. You can track maximization via the "window-state-event" signal on GtkWidget.
Asks to unmaximize window. Note that you shouldn't assume the window is definitely unmaximized afterward, because other entities (e.g. the user or window manager) could maximize it again, and not all window managers honor requests to unmaximize. But normally the window will end up unmaximized. Just don't write code that crashes if not. You can track maximization via the "window-state-event" signal on GtkWidget.
Asks to place window in the fullscreen state. Note that you shouldn't assume the window is definitely full screen afterward, because other entities (e.g. the user or window manager) could unfullscreen it again, and not all window managers honor requests to fullscreen windows. But normally the window will end up fullscreen. Just don't write code that crashes if not. You can track the fullscreen state via the "window-state-event" signal on GtkWidget. Since 2.2
Asks to toggle off the fullscreen state for window. Note that you shouldn't assume the window is definitely not full screen afterward, because other entities (e.g. the user or window manager) could fullscreen it again, and not all window managers honor requests to unfullscreen windows. But normally the window will end up restored to its normal state. Just don't write code that crashes if not. You can track the fullscreen state via the "window-state-event" signal on GtkWidget. Since 2.2
Asks to keep window above, so that it stays on top. Note that you shouldn't assume the window is definitely above afterward, because other entities (e.g. the user or window manager) could not keep it above, and not all window managers support keeping windows above. But normally the window will end kept above. Just don't write code that crashes if not. It's permitted to call this function before showing a window, in which case the window will be kept above when it appears onscreen initially. You can track the above state via the "window-state-event" signal on GtkWidget. Note that, according to the Extended Window Manager Hints specification, the above state is mainly meant for user preferences and should not be used by applications e.g. for drawing attention to their dialogs. Since 2.4
Asks to keep window below, so that it stays in bottom. Note that you shouldn't assume the window is definitely below afterward, because other entities (e.g. the user or window manager) could not keep it below, and not all window managers support putting windows below. But normally the window will be kept below. Just don't write code that crashes if not. It's permitted to call this function before showing a window, in which case the window will be kept below when it appears onscreen initially. You can track the below state via the "window-state-event" signal on GtkWidget. Note that, according to the Extended Window Manager Hints specification, the above state is mainly meant for user preferences and should not be used by applications e.g. for drawing attention to their dialogs. Since 2.4
Starts resizing a window. This function is used if an application has window resizing controls. When GDK can support it, the resize will be done using the standard mechanism for the window manager or windowing system. Otherwise, GDK will try to emulate window resizing, potentially not all that well, depending on the windowing system.
Starts moving a window. This function is used if an application has window movement grips. When GDK can support it, the window movement will be done using the standard mechanism for the window manager or windowing system. Otherwise, GDK will try to emulate window movement, potentially not all that well, depending on the windowing system.
By default, windows are decorated with a title bar, resize controls, etc. Some window managers allow GTK+ to disable these decorations, creating a borderless window. If you set the decorated property to FALSE using this function, GTK+ will do its best to convince the window manager not to decorate the window. Depending on the system, this function may not have any effect when called on a window that is already visible, so you should call it before calling gtk_widget_show(). On Windows, this function always works, since there's no window manager policy involved.
By default, windows have a close button in the window frame. Some window managers allow GTK+ to disable this button. If you set the deletable property to FALSE using this function, GTK+ will do its best to convince the window manager not to show a close button. Depending on the system, this function may not have any effect when called on a window that is already visible, so you should call it before calling gtk_widget_show(). On Windows, this function always works, since there's no window manager policy involved. Since 2.10
Sets the mnemonic modifier for this window.
By setting the type hint for the window, you allow the window manager to decorate and handle the window in a way which is suitable to the function of the window in your application. This function should be called before the window becomes visible. gtk_dialog_new_with_buttons() and other convenience functions in GTK+ will sometimes call gtk_window_set_type_hint() on your behalf.
Windows may set a hint asking the desktop environment not to display the window in the task bar. This function sets this hint. Since 2.2
Windows may set a hint asking the desktop environment not to display the window in the pager. This function sets this hint. (A "pager" is any desktop navigation tool such as a workspace switcher that displays a thumbnail representation of the windows on the screen.) Since 2.2
Windows may set a hint asking the desktop environment to draw the users attention to the window. This function sets this hint. Since 2.8
Windows may set a hint asking the desktop environment not to receive the input focus. This function sets this hint. Since 2.4
Windows may set a hint asking the desktop environment not to receive the input focus when the window is mapped. This function sets this hint. Since 2.6
Startup notification identifiers are used by desktop environment to track application startup, to provide user feedback and other features. This function changes the corresponding property on the underlying GdkWindow. Normally, startup identifier is managed automatically and you should only use this function in special cases like transferring focus from other processes. You should use this function before calling gtk_window_present() or any equivalent function generating a window map event. This function is only useful on X11, not with other GTK+ targets. Since 2.12
This function is only useful on X11, not with other GTK+ targets. In combination with the window title, the window role allows a window manager to identify "the same" window when an application is restarted. So for example you might set the "toolbox" role on your app's toolbox window, so that when the user restarts their session, the window manager can put the toolbox back in the same place. If a window already has a unique title, you don't need to set the role, since the WM can use the title to identify the window when restoring the session.
Returns whether the window has been set to have decorations such as a title bar via gtk_window_set_decorated().
Returns whether the window has been set to have a close button via gtk_window_set_deletable(). Since 2.10
Gets the value set by gtk_window_set_default_icon_list(). The list is a copy and should be freed with g_list_free(), but the pixbufs in the list have not had their reference count incremented.
Returns the fallback icon name for windows that has been set with gtk_window_set_default_icon_name(). The returned string is owned by GTK+ and should not be modified. It is only valid until the next call to gtk_window_set_default_icon_name(). Since 2.16
Gets the default size of the window. A value of -1 for the width or height indicates that a default size has not been explicitly set for that dimension, so the "natural" size of the window will be used.
Returns whether the window will be destroyed with its transient parent. See gtk_window_set_destroy_with_parent().
Returns whether the window has requested to have its titlebar hidden when maximized. See gtk_window_set_hide_titlebar_when_maximized().
Gets the value set by gtk_window_set_icon() (or if you've called gtk_window_set_icon_list(), gets the first icon in the icon list).
Retrieves the list of icons set by gtk_window_set_icon_list(). The list is copied, but the reference count on each member won't be incremented.
Returns the name of the themed icon for the window, see gtk_window_set_icon_name(). Since 2.6
Returns the mnemonic modifier for this window. See gtk_window_set_mnemonic_modifier().
Returns whether the window is modal. See gtk_window_set_modal().
This function returns the position you need to pass to gtk_window_move() to keep window in its current position. This means that the meaning of the returned value varies with window gravity. See gtk_window_move() for more details. If you haven't changed the window gravity, its gravity will be GDK_GRAVITY_NORTH_WEST. This means that gtk_window_get_position() gets the position of the top-left corner of the window manager frame for the window. gtk_window_move() sets the position of this same top-left corner. gtk_window_get_position() is not 100% reliable because the X Window System does not specify a way to obtain the geometry of the decorations placed on a window by the window manager. Thus GTK+ is using a "best guess" that works with most window managers. Moreover, nearly all window managers are historically broken with respect to their handling of window gravity. So moving a window to its current position as returned by gtk_window_get_position() tends to result in moving the window slightly. Window managers are slowly getting better over time. If a window has gravity GDK_GRAVITY_STATIC the window manager frame is not relevant, and thus gtk_window_get_position() will always produce accurate results. However you can't use static gravity to do things like place a window in a corner of the screen, because static gravity ignores the window manager decorations. If you are saving and restoring your application's window positions, you should know that it's impossible for applications to do this without getting it somewhat wrong because applications do not have sufficient knowledge of window manager state. The Correct Mechanism is to support the session management protocol (see the "GnomeClient" object in the GNOME libraries for example) and allow the window manager to save your window sizes and positions.
Returns the role of the window. See gtk_window_set_role() for further explanation.
Obtains the current size of window. If window is not onscreen, it returns the size GTK+ will suggest to the window manager for the initial window size (but this is not reliably the same as the size the window manager will actually select). The size obtained by gtk_window_get_size() is the last size received in a GdkEventConfigure, that is, GTK+ uses its locally-stored size, rather than querying the X server for the size. As a result, if you call gtk_window_resize() then immediately call gtk_window_get_size(), the size won't have taken effect yet. After the window manager processes the resize request, GTK+ receives notification that the size has changed via a configure event, and the size of the window gets updated. Note 1: Nearly any use of this function creates a race condition, because the size of the window may change between the time that you get the size and the time that you perform some action assuming that size is the current size. To avoid race conditions, connect to "configure-event" on the window and adjust your size-dependent state to match the size delivered in the GdkEventConfigure. Note 2: The returned size does not include the size of the window manager decorations (aka the window frame or border). Those are not drawn by GTK+ and GTK+ has no reliable method of determining their size. Note 3: If you are getting a window size in order to position the window onscreen, there may be a better way. The preferred way is to simply set the window's semantic type with gtk_window_set_type_hint(), which allows the window manager to e.g. center dialogs. Also, if you set the transient parent of dialogs with gtk_window_set_transient_for() window managers will often center the dialog over its parent window. It's much preferred to let the window manager handle these things rather than doing it yourself, because all apps will behave consistently and according to user prefs if the window manager handles it. Also, the window manager can take the size of the window decorations/border into account, while your application cannot. In any case, if you insist on application-specified window positioning, there's still a better way than doing it yourself - gtk_window_set_position() will frequently handle the details for you.
Retrieves the title of the window. See gtk_window_set_title().
Fetches the transient parent for this window. See gtk_window_set_transient_for().
Fetches the attach widget for this window. See gtk_window_set_attached_to().
Gets the type hint for this window. See gtk_window_set_type_hint().
Gets the value set by gtk_window_set_skip_taskbar_hint() Since 2.2
Gets the value set by gtk_window_set_skip_pager_hint(). Since 2.2
Gets the value set by gtk_window_set_urgency_hint() Since 2.8
Gets the value set by gtk_window_set_accept_focus(). Since 2.4
Gets the value set by gtk_window_set_focus_on_map(). Since 2.6
Returns the group for window or the default group, if window is NULL or if window does not have an explicit window group. Since 2.10
Returns whether window has an explicit window group. Since 2.22
Gets the type of the window. See GtkWindowType. Since 2.20
Asks the window manager to move window to the given position. Window managers are free to ignore this; most window managers ignore requests for initial window positions (instead using a user-defined placement algorithm) and honor requests after the window has already been shown. Note: the position is the position of the gravity-determined
Parses a standard X Window System geometry string - see the manual page for X (type 'man X') for details on this. gtk_window_parse_geometry() does work on all GTK+ ports including Win32 but is primarily intended for an X environment. If either a size or a position can be extracted from the geometry string, gtk_window_parse_geometry() returns TRUE and calls gtk_window_set_default_size() and/or gtk_window_move() to resize/move the window. If gtk_window_parse_geometry() returns TRUE, it will also set the GDK_HINT_USER_POS and/or GDK_HINT_USER_SIZE hints indicating to the window manager that the size/position of the window was user-specified. This causes most window managers to honor the geometry. Note that for gtk_window_parse_geometry() to work as expected, it has to be called when the window has its "final" size, i.e. after calling gtk_widget_show_all() on the contents and gtk_window_set_geometry_hints() on the window.
Warning gtk_window_reshow_with_initial_size has been deprecated since version 3.10 and should not be used in newly-written code. GUI builders can call gtk_widget_hide(), gtk_widget_unrealize() and then gtk_widget_show() on window themselves, if they still need this functionality. Hides window, then reshows it, resetting the default size and position of the window. Used by GUI builders only.
Resizes the window as if the user had done so, obeying geometry constraints. The default geometry constraint is that windows may not be smaller than their size request; to override this constraint, call gtk_widget_set_size_request() to set the window's request to a smaller value. If gtk_window_resize() is called before showing a window for the first time, it overrides any default size set with gtk_window_set_default_size(). Windows may not be resized smaller than 1 by 1 pixels.
Like gtk_window_resize(), but width and height are interpreted in terms of the base size and increment set with gtk_window_set_geometry_hints.
Sets an icon list to be used as fallback for windows that haven't had gtk_window_set_icon_list() called on them to set up a window-specific icon list. This function allows you to set up the icon for all windows in your app at once. See gtk_window_set_icon_list() for more details.
Sets an icon to be used as fallback for windows that haven't had gtk_window_set_icon() called on them from a pixbuf. Since 2.4
Sets an icon to be used as fallback for windows that haven't had gtk_window_set_icon_list() called on them from a file on disk. Warns on failure if err is NULL. Since 2.2
Sets an icon to be used as fallback for windows that haven't had gtk_window_set_icon_list() called on them from a named themed icon, see gtk_window_set_icon_name(). Since 2.6
Sets up the icon representing a GtkWindow. This icon is used when the window is minimized (also known as iconified). Some window managers or desktop environments may also place it in the window frame, or display it in other contexts. The icon should be provided in whatever size it was naturally drawn; that is, don't scale the image before passing it to GTK+. Scaling is postponed until the last minute, when the desired final size is known, to allow best quality. If you have your icon hand-drawn in multiple sizes, use gtk_window_set_icon_list(). Then the best size will be used. This function is equivalent to calling gtk_window_set_icon_list() with a 1-element list. See also gtk_window_set_default_icon_list() to set the icon for all windows in your application in one go.
Sets up the icon representing a GtkWindow. The icon is used when the window is minimized (also known as iconified). Some window managers or desktop environments may also place it in the window frame, or display it in other contexts. gtk_window_set_icon_list() allows you to pass in the same icon in several hand-drawn sizes. The list should contain the natural sizes your icon is available in; that is, don't scale the image before passing it to GTK+. Scaling is postponed until the last minute, when the desired final size is known, to allow best quality. By passing several sizes, you may improve the final image quality of the icon, by reducing or eliminating automatic image scaling. Recommended sizes to provide: 16x16, 32x32, 48x48 at minimum, and larger images (64x64, 128x128) if you have them. See also gtk_window_set_default_icon_list() to set the icon for all windows in your application in one go. Note that transient windows (those who have been set transient for another window using gtk_window_set_transient_for()) will inherit their icon from their transient parent. So there's no need to explicitly set the icon on transient windows.
Sets the icon for window. Warns on failure if err is NULL. This function is equivalent to calling gtk_window_set_icon() with a pixbuf created by loading the image from filename. Since 2.2
Sets the icon for the window from a named themed icon. See the docs for GtkIconTheme for more details. Note that this has nothing to do with the WM_ICON_NAME property which is mentioned in the ICCCM. Since 2.6
By default, after showing the first GtkWindow, GTK+ calls gdk_notify_startup_complete(). Call this function to disable the automatic startup notification. You might do this if your first window is a splash screen, and you want to delay notification until after your real main window has been shown, for example. In that example, you would disable startup notification temporarily, show your splash screen, then re-enable it so that showing the main window would automatically result in notification. Since 2.2
Warning gtk_window_get_opacity has been deprecated since version 3.8 and should not be used in newly-written code. Use gtk_widget_get_opacity instead. Fetches the requested opacity for this window. See gtk_window_set_opacity(). Since 2.12
Warning gtk_window_set_opacity has been deprecated since version 3.8 and should not be used in newly-written code. Use gtk_widget_set_opacity instead. Request the windowing system to make window partially transparent, with opacity 0 being fully transparent and 1 fully opaque. (Values of the opacity parameter are clamped to the [0,1] range.) On X11 this has any effect only on X screens with a compositing manager running. See gtk_widget_is_composited(). On Windows it should work always. Note that setting a window's opacity after the window has been shown causes it to flicker once on Windows. Since 2.12
Gets the value of the "mnemonics-visible" property. Since 2.20
Sets the "mnemonics-visible" property. Since 2.20
Gets the value of the "focus-visible" property.
Sets the "focus-visible" property.
Sets whether window has a corner resize grip. Note that the resize grip is only shown if the window is actually resizable and not maximized. Use gtk_window_resize_grip_is_visible() to find out if the resize grip is currently shown.
Determines whether the window may have a resize grip.
Determines whether a resize grip is visible for the specified window.
If a window has a resize grip, this will retrieve the grip position, width and height into the specified GdkRectangle.
Gets the GtkApplication associated with the window (if any).
Sets or unsets the GtkApplication associated with the window. The application will be kept alive for at least as long as the window is open.
Tells GTK+ whether to drop its extra reference to the window when gtk_widget_destroy() is called. This function is only exported for the benefit of language bindings which may need to keep the window alive until their wrapper object is garbage collected. There is no justification for ever calling this function in an application.
Sets a custom titlebar for window. If you set a custom titlebar, GTK+ will do its best to convince the window manager not to put its own titlebar on the window. Depending on the system, this function may not work for a window that is already visible, so you set the titlebar before calling gtk_widget_show().
A GtkAssistant is a widget used to represent a generally complex operation splitted in several steps, guiding the user through its pages and controlling the page flow to collect the necessary data.
The design of GtkAssistant is that it controls what buttons to show and to make sensitive, based on what it knows about the page sequence and the type of each page, in addition to state information like the page completion and committed status.
If you have a case that doesn't quite fit in GtkAssistants way of handling buttons, you can use the GTK_ASSISTANT_PAGE_CUSTOM page type and handle buttons yourself.
GtkAssistant as GtkBuildable
The GtkAssistant implementation of the GtkBuildable interface exposes the action_area as internal children with the name "action_area".
To add pages to an assistant in GtkBuilder, simply add it as a <child> to the GtkAssistant object, and set its child properties as necessary.