Sets our main struct and passes it to the parent class
Signals that a single key has possibly changed. Backend implementations should call this if a key has possibly changed its value. key must be a valid key (ie starting with a slash, not containing '//', and not ending with a slash). The implementation must call this function during any call to g_settings_backend_write(), before the call returns (except in the case that no keys are actually changed and it cares to detect this fact). It may not rely on the existence of a mainloop for dispatching the signal later. The implementation may call this function at any other time it likes in response to other events (such as changes occuring outside of the program). These calls may originate from a mainloop or may originate in response to any other action (including from calls to g_settings_backend_write()). In the case that this call is in response to a call to g_settings_backend_write() then origin_tag must be set to the same value that was passed to that call. Since 2.26
This call is a convenience wrapper. It gets the list of changes from tree, computes the longest common prefix and calls g_settings_backend_changed(). Since 2.26
the main Gtk struct as a void*
Signals that a list of keys have possibly changed. Backend implementations should call this if keys have possibly changed their values. path must be a valid path (ie starting and ending with a slash and not containing '//'). Each string in items must form a valid key name when path is prefixed to it (ie: each item must not start or end with '/' and must not contain '//'). The meaning of this signal is that any of the key names resulting from the contatenation of path with each item in items may have changed. The same rules for when notifications must occur apply as per g_settings_backend_changed(). These two calls can be used interchangeably if exactly one item has changed (although in that case g_settings_backend_changed() is definitely preferred). For efficiency reasons, the implementation should strive for path to be as long as possible (ie: the longest common prefix of all of the keys that were changed) but this is not strictly required. Since 2.26
Signals that all keys below a given path may have possibly changed. Backend implementations should call this if an entire path of keys have possibly changed their values. path must be a valid path (ie starting and ending with a slash and not containing '//'). The meaning of this signal is that any of the key which has a name starting with path may have changed. The same rules for when notifications must occur apply as per g_settings_backend_changed(). This call might be an appropriate reasponse to a 'reset' call but implementations are also free to explicitly list the keys that were affected by that call if they can easily do so. For efficiency reasons, the implementation should strive for path to be as long as possible (ie: the longest common prefix of all of the keys that were changed) but this is not strictly required. As an example, if this function is called with the path of "/" then every single key in the application will be notified of a possible change. Since 2.26
Signals that the writability of all keys below a given path may have changed. Since GSettings performs no locking operations for itself, this call will always be made in response to external events. Since 2.26
Signals that the writability of a single key has possibly changed. Since GSettings performs no locking operations for itself, this call will always be made in response to external events. Since 2.26
Calculate the longest common prefix of all keys in a tree and write out an array of the key names relative to that prefix and, optionally, the value to store at each of those keys. You must free the value returned in path, keys and values using g_free(). You should not attempt to free or unref the contents of keys or values. Since 2.26
Returns the default GSettingsBackend. It is possible to override the default by setting the GSETTINGS_BACKEND environment variable to the name of a settings backend. The user gets a reference to the backend. Since 2.28
Creates a keyfile-backed GSettingsBackend. The filename of the keyfile to use is given by filename. All settings read to or written from the backend must fall under the path given in root_path (which must start and end with a slash and not contain two consecutive slashes). root_path may be "/". If root_group is non-NULL then it specifies the name of the keyfile group used for keys that are written directly below root_path. For example, if root_path is "/apps/example/" and root_group is "toplevel", then settings the key "/apps/example/enabled" to a value
Creates a memory-backed GSettingsBackend. This backend allows changes to settings, but does not write them to any backing storage, so the next time you run your application, the memory backend will start out with the default values again. Since 2.28
Creates a readonly GSettingsBackend. This backend does not allow changes to settings, so all settings will always have their default values. Since 2.28
the main Gtk struct
the main Gtk struct
the main Gtk struct as a void*
Gets a D Object from the objects table of associations.
The notify signal is emitted on an object when one of its properties has been changed. Note that getting this signal doesn't guarantee that the value of the property has actually changed, it may also be emitted when the setter for the property is called to reinstate the previous value. This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the It is important to note that you must use canonical parameter names as detail strings for the notify signal. See Also GParamSpecObject, g_param_spec_object()
Installs a new property. This is usually done in the class initializer. Note that it is possible to redefine a property in a derived class, by installing a property with the same name. This can be useful at times, e.g. to change the range of allowed values or the default value.
Installs new properties from an array of GParamSpecs. This is usually done in the class initializer. The property id of each property is the index of each GParamSpec in the pspecs array. The property id of 0 is treated specially by GObject and it should not be used to store a GParamSpec. This function should be used if you plan to use a static array of GParamSpecs and g_object_notify_by_pspec(). For instance, this Since 2.26
Looks up the GParamSpec for a property of a class.
Get an array of GParamSpec* for all properties of a class.
Registers property_id as referring to a property with the name name in a parent class or in an interface implemented by oclass. This allows this class to override a property implementation in a parent class or to provide the implementation of a property from an interface. Note Internally, overriding is implemented by creating a property of type GParamSpecOverride; generally operations that query the properties of the object class, such as g_object_class_find_property() or g_object_class_list_properties() will return the overridden property. However, in one case, the construct_properties argument of the constructor virtual function, the GParamSpecOverride is passed instead, so that the param_id field of the GParamSpec will be correct. For virtually all uses, this makes no difference. If you need to get the overridden property, you can call g_param_spec_get_redirect_target(). Since 2.4
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property. This function is meant to be called from the interface's default vtable initialization function (the class_init member of GTypeInfo.) It must not be called after after class_init has been called for any object types implementing this interface. Since 2.4
Find the GParamSpec with the given name for an interface. Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek(). Since 2.4
Lists the properties of an interface.Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek(). Since 2.4
Increases the reference count of object.
Decreases the reference count of object. When its reference count drops to 0, the object is finalized (i.e. its memory is freed).
Increase the reference count of object, and possibly remove the floating reference, if object has a floating reference. In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one. Since 2.10
Clears a reference to a GObject. object_ptr must not be NULL. If the reference is NULL then this function does nothing. Otherwise, the reference count of the object is decreased and the pointer is set to NULL. This function is threadsafe and modifies the pointer atomically, using memory barriers where needed. A macro is also included that allows this function to be used without pointer casts. Since 2.28
Checks whether object has a floating reference. Since 2.10
This function is intended for GObject implementations to re-enforce a floating object reference. Doing this is seldomly required: all GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink(). Since 2.10
Adds a weak reference callback to an object. Weak references are used for notification when an object is finalized. They are called "weak references" because they allow you to safely hold a pointer to an object without calling g_object_ref() (g_object_ref() adds a strong reference, that is, forces the object to stay alive).
Removes a weak reference callback to an object.
Adds a weak reference from weak_pointer to object to indicate that the pointer located at weak_pointer_location is only valid during the lifetime of object. When the object is finalized, weak_pointer will be set to NULL.
Removes a weak reference from object that was previously added using g_object_add_weak_pointer(). The weak_pointer_location has to match the one used with g_object_add_weak_pointer().
Increases the reference count of the object by one and sets a callback to be called when all other references to the object are dropped, or when this is already the last reference to the object and another reference is established. This functionality is intended for binding object to a proxy object managed by another memory manager. This is done with two paired references: the strong reference added by g_object_add_toggle_ref() and a reverse reference to the proxy object which is either a strong reference or weak reference. The setup is that when there are no other references to object, only a weak reference is held in the reverse direction from object to the proxy object, but when there are other references held to object, a strong reference is held. The notify callback is called when the reference from object to the proxy object should be toggled from strong to weak (is_last_ref true) or weak to strong (is_last_ref false). Since a (normal) reference must be held to the object before calling g_object_toggle_ref(), the initial state of the reverse link is always strong. Multiple toggle references may be added to the same gobject, however if there are multiple toggle references to an object, none of them will ever be notified until all but one are removed. For this reason, you should only ever use a toggle reference if there is important state in the proxy object. Since 2.8
Removes a reference added with g_object_add_toggle_ref(). The reference count of the object is decreased by one. Since 2.8
Emits a "notify" signal for the property property_name on object. When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Emits a "notify" signal for the property specified by pspec on object. This function omits the property name lookup, hence it is faster than g_object_notify(). One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with Since 2.26
Increases the freeze count on object. If the freeze count is non-zero, the emission of "notify" signals on object is stopped. The signals are queued until the freeze count is decreased to zero. This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Reverts the effect of a previous call to g_object_freeze_notify(). The freeze count is decreased on object and when it reaches zero, all queued "notify" signals are emitted. It is an error to call this function when the freeze count is zero.
Gets a named field from the objects table of associations (see g_object_set_data()).
Each object carries around a table of associations from strings to pointers. This function lets you set an association. If the object already had an association with that name, the old association will be destroyed.
Like g_object_set_data() except it adds notification for when the association is destroyed, either by setting it to a different value or when the object is destroyed. Note that the destroy callback is not called if data is NULL.
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
This function gets back user data pointers stored via g_object_set_qdata().
This sets an opaque, named pointer on an object. The name is specified through a GQuark (retrived e.g. via g_quark_from_static_string()), and the pointer can be gotten back from the object with g_object_get_qdata() until the object is finalized. Setting a previously set user data pointer, overrides (frees) the old pointer set, using NULL as pointer essentially removes the data stored.
This function works like g_object_set_qdata(), but in addition, a void (*destroy) (gpointer) function may be specified which is called with data as argument when the object is finalized, or the data is being overwritten by a call to g_object_set_qdata() with the same quark.
This function gets back user data pointers stored via g_object_set_qdata() and removes the data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update
Sets a property on an object.
Gets a property of an object. value must have been initialized to the expected type of the property (or a type to which the expected type can be transformed) using g_value_init(). In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset(). Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
Sets properties on an object.
Gets properties of an object. In general, a copy is made of the property contents and the caller is responsible for freeing the memory in the appropriate manner for the type, for instance by calling g_free() or g_object_unref(). See g_object_get().
This function essentially limits the life time of the closure to the life time of the object. That is, when the object is finalized, the closure is invalidated by calling g_closure_invalidate() on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, g_object_ref() and g_object_unref() are added as marshal guards to the closure, to ensure that an extra reference count is held on object during invocation of the closure. Usually, this function will be called on closures that use this object as closure data.
Releases all references to other objects. This can be used to break reference cycles. This functions should only be called from object system implementations.
Description The GSettingsBackend interface defines a generic interface for non-strictly-typed data that is stored in a hierarchy. To implement an alternative storage backend for GSettings, you need to implement the GSettingsBackend interface and then make it implement the extension point G_SETTINGS_BACKEND_EXTENSION_POINT_NAME. The interface defines methods for reading and writing values, a method for determining if writing of certain values will fail (lockdown) and a change notification mechanism. The semantics of the interface are very precisely defined and implementations must carefully adhere to the expectations of callers that are documented on each of the interface methods. Some of the GSettingsBackend functions accept or return a GTree. These trees always have strings as keys and GVariant as values. g_settings_backend_create_tree() is a convenience function to create suitable trees. Note The GSettingsBackend API is exported to allow third-party implementations, but does not carry the same stability guarantees as the public GIO API. For this reason, you have to define the C preprocessor symbol G_SETTINGS_ENABLE_BACKEND before including gio/gsettingsbackend.h