Sets our main struct and passes it to the parent class
This function should almost never be called. It clears the tree_model_sort of any cached iterators that haven't been reffed with gtk_tree_model_ref_node(). This might be useful if the child model being sorted is static (and doesn't change often) and there has been a lot of unreffed access to nodes. As a side effect of this function, all unreffed iters will be invalid.
Sets sort_iter to point to the row in tree_model_sort that corresponds to the row pointed at by child_iter. If sort_iter was not set, FALSE is returned. Note: a boolean is only returned since 2.14.
Converts child_path to a path relative to tree_model_sort. That is, child_path points to a path in the child model. The returned path will point to the same row in the sorted model. If child_path isn't a valid path on the child model, then NULL is returned.
Sets child_iter to point to the row pointed to by sorted_iter.
Converts sorted_path to a path on the child model of tree_model_sort. That is, sorted_path points to a location in tree_model_sort. The returned path will point to the same location in the model not being sorted. If sorted_path does not point to a location in the child model, NULL is returned.
Returns the model the GtkTreeModelSort is sorting.
the main Gtk struct as a void*
Warning This function is slow. Only use it for debugging and/or testing purposes. Checks if the given iter is a valid iter for this GtkTreeModelSort. Since 2.2
This resets the default sort function to be in the 'unsorted' state. That is, it is in the same order as the child model. It will re-sort the model to be in the same order as the child model only if the GtkTreeModelSort is in 'unsorted' state.
Creates a new GtkTreeModel, with child_model as the child model.
the main Gtk struct
the main Gtk struct
the main Gtk struct as a void*
Gets a D Object from the objects table of associations.
The notify signal is emitted on an object when one of its properties has been changed. Note that getting this signal doesn't guarantee that the value of the property has actually changed, it may also be emitted when the setter for the property is called to reinstate the previous value. This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the It is important to note that you must use canonical parameter names as detail strings for the notify signal. See Also GParamSpecObject, g_param_spec_object()
Installs a new property. This is usually done in the class initializer. Note that it is possible to redefine a property in a derived class, by installing a property with the same name. This can be useful at times, e.g. to change the range of allowed values or the default value.
Installs new properties from an array of GParamSpecs. This is usually done in the class initializer. The property id of each property is the index of each GParamSpec in the pspecs array. The property id of 0 is treated specially by GObject and it should not be used to store a GParamSpec. This function should be used if you plan to use a static array of GParamSpecs and g_object_notify_by_pspec(). For instance, this Since 2.26
Looks up the GParamSpec for a property of a class.
Get an array of GParamSpec* for all properties of a class.
Registers property_id as referring to a property with the name name in a parent class or in an interface implemented by oclass. This allows this class to override a property implementation in a parent class or to provide the implementation of a property from an interface. Note Internally, overriding is implemented by creating a property of type GParamSpecOverride; generally operations that query the properties of the object class, such as g_object_class_find_property() or g_object_class_list_properties() will return the overridden property. However, in one case, the construct_properties argument of the constructor virtual function, the GParamSpecOverride is passed instead, so that the param_id field of the GParamSpec will be correct. For virtually all uses, this makes no difference. If you need to get the overridden property, you can call g_param_spec_get_redirect_target(). Since 2.4
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property. This function is meant to be called from the interface's default vtable initialization function (the class_init member of GTypeInfo.) It must not be called after after class_init has been called for any object types implementing this interface. Since 2.4
Find the GParamSpec with the given name for an interface. Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek(). Since 2.4
Lists the properties of an interface.Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek(). Since 2.4
Increases the reference count of object.
Decreases the reference count of object. When its reference count drops to 0, the object is finalized (i.e. its memory is freed).
Increase the reference count of object, and possibly remove the floating reference, if object has a floating reference. In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one. Since 2.10
Clears a reference to a GObject. object_ptr must not be NULL. If the reference is NULL then this function does nothing. Otherwise, the reference count of the object is decreased and the pointer is set to NULL. This function is threadsafe and modifies the pointer atomically, using memory barriers where needed. A macro is also included that allows this function to be used without pointer casts. Since 2.28
Checks whether object has a floating reference. Since 2.10
This function is intended for GObject implementations to re-enforce a floating object reference. Doing this is seldomly required: all GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink(). Since 2.10
Adds a weak reference callback to an object. Weak references are used for notification when an object is finalized. They are called "weak references" because they allow you to safely hold a pointer to an object without calling g_object_ref() (g_object_ref() adds a strong reference, that is, forces the object to stay alive).
Removes a weak reference callback to an object.
Adds a weak reference from weak_pointer to object to indicate that the pointer located at weak_pointer_location is only valid during the lifetime of object. When the object is finalized, weak_pointer will be set to NULL.
Removes a weak reference from object that was previously added using g_object_add_weak_pointer(). The weak_pointer_location has to match the one used with g_object_add_weak_pointer().
Increases the reference count of the object by one and sets a callback to be called when all other references to the object are dropped, or when this is already the last reference to the object and another reference is established. This functionality is intended for binding object to a proxy object managed by another memory manager. This is done with two paired references: the strong reference added by g_object_add_toggle_ref() and a reverse reference to the proxy object which is either a strong reference or weak reference. The setup is that when there are no other references to object, only a weak reference is held in the reverse direction from object to the proxy object, but when there are other references held to object, a strong reference is held. The notify callback is called when the reference from object to the proxy object should be toggled from strong to weak (is_last_ref true) or weak to strong (is_last_ref false). Since a (normal) reference must be held to the object before calling g_object_toggle_ref(), the initial state of the reverse link is always strong. Multiple toggle references may be added to the same gobject, however if there are multiple toggle references to an object, none of them will ever be notified until all but one are removed. For this reason, you should only ever use a toggle reference if there is important state in the proxy object. Since 2.8
Removes a reference added with g_object_add_toggle_ref(). The reference count of the object is decreased by one. Since 2.8
Emits a "notify" signal for the property property_name on object. When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Emits a "notify" signal for the property specified by pspec on object. This function omits the property name lookup, hence it is faster than g_object_notify(). One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with Since 2.26
Increases the freeze count on object. If the freeze count is non-zero, the emission of "notify" signals on object is stopped. The signals are queued until the freeze count is decreased to zero. This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Reverts the effect of a previous call to g_object_freeze_notify(). The freeze count is decreased on object and when it reaches zero, all queued "notify" signals are emitted. It is an error to call this function when the freeze count is zero.
Gets a named field from the objects table of associations (see g_object_set_data()).
Each object carries around a table of associations from strings to pointers. This function lets you set an association. If the object already had an association with that name, the old association will be destroyed.
Like g_object_set_data() except it adds notification for when the association is destroyed, either by setting it to a different value or when the object is destroyed. Note that the destroy callback is not called if data is NULL.
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
This function gets back user data pointers stored via g_object_set_qdata().
This sets an opaque, named pointer on an object. The name is specified through a GQuark (retrived e.g. via g_quark_from_static_string()), and the pointer can be gotten back from the object with g_object_get_qdata() until the object is finalized. Setting a previously set user data pointer, overrides (frees) the old pointer set, using NULL as pointer essentially removes the data stored.
This function works like g_object_set_qdata(), but in addition, a void (*destroy) (gpointer) function may be specified which is called with data as argument when the object is finalized, or the data is being overwritten by a call to g_object_set_qdata() with the same quark.
This function gets back user data pointers stored via g_object_set_qdata() and removes the data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update
Sets a property on an object.
Gets a property of an object. value must have been initialized to the expected type of the property (or a type to which the expected type can be transformed) using g_value_init(). In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset(). Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
Sets properties on an object.
Gets properties of an object. In general, a copy is made of the property contents and the caller is responsible for freeing the memory in the appropriate manner for the type, for instance by calling g_free() or g_object_unref(). See g_object_get().
This function essentially limits the life time of the closure to the life time of the object. That is, when the object is finalized, the closure is invalidated by calling g_closure_invalidate() on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, g_object_ref() and g_object_unref() are added as marshal guards to the closure, to ensure that an extra reference count is held on object during invocation of the closure. Usually, this function will be called on closures that use this object as closure data.
Releases all references to other objects. This can be used to break reference cycles. This functions should only be called from object system implementations.
the main Gtk struct as a void*
Get the value of a column as a char array. this is the same calling getValue and get the string from the value object
Get the value of a column as a char array. this is the same calling getValue and get the int from the value object
Sets iter to a valid iterator pointing to path.
Initializes and sets value to that at column. When done with value, g_value_unset() needs to be called to free any allocated memory.
This signal is emitted when a row in the model has changed.
This signal is emitted when a row has been deleted. Note that no iterator is passed to the signal handler, since the row is already deleted. This should be called by models after a row has been removed. The location pointed to by path should be the location that the row previously was at. It may not be a valid location anymore.
This signal is emitted when a row has gotten the first child row or lost its last child row.
This signal is emitted when a new row has been inserted in the model. Note that the row may still be empty at this point, since it is a common pattern to first insert an empty row, and then fill it with the desired values.
This signal is emitted when the children of a node in the GtkTreeModel have been reordered. Note that this signal is not emitted when rows are reordered by DND, since this is implemented by removing and then reinserting the row. See Also GtkTreeView, GtkTreeStore, GtkListStore, GtkTreeDnd, GtkTreeSortable [4] Here, iter is short for “iterator”
Returns a set of flags supported by this interface. The flags are a bitwise combination of GtkTreeModelFlags. The flags supported should not change during the lifecycle of the tree_model.
Returns the number of columns supported by tree_model.
Returns the type of the column.
Sets iter to a valid iterator pointing to path_string, if it exists. Otherwise, iter is left invalid and FALSE is returned.
Initializes iter with the first iterator in the tree (the one at the path "0") and returns TRUE. Returns FALSE if the tree is empty.
Returns a newly-created GtkTreePath referenced by iter. This path should be freed with gtk_tree_path_free().
Sets iter to point to the node following it at the current level. If there is no next iter, FALSE is returned and iter is set to be invalid.
Sets iter to point to the first child of parent. If parent has no children, FALSE is returned and iter is set to be invalid. parent will remain a valid node after this function has been called. If parent is NULL returns the first node, equivalent to gtk_tree_model_get_iter_first (tree_model, iter);
Returns TRUE if iter has children, FALSE otherwise.
Returns the number of children that iter has. As a special case, if iter is NULL, then the number of toplevel nodes is returned.
Sets iter to be the child of parent, using the given index. The first index is 0. If n is too big, or parent has no children, iter is set to an invalid iterator and FALSE is returned. parent will remain a valid node after this function has been called. As a special case, if parent is NULL, then the nth root node is set.
Sets iter to be the parent of child. If child is at the toplevel, and doesn't have a parent, then iter is set to an invalid iterator and FALSE is returned. child will remain a valid node after this function has been called.
Generates a string representation of the iter. This string is a ':' separated list of numbers. For example, "4:10:0:3" would be an acceptable return value for this string. Since 2.2
Lets the tree ref the node. This is an optional method for models to implement. To be more specific, models may ignore this call as it exists primarily for performance reasons. This function is primarily meant as a way for views to let caching model know when nodes are being displayed (and hence, whether or not to cache that node.) For example, a file-system based model would not want to keep the entire file-hierarchy in memory, just the sections that are currently being displayed by every current view. A model should be expected to be able to get an iter independent of its reffed state.
Lets the tree unref the node. This is an optional method for models to implement. To be more specific, models may ignore this call as it exists primarily for performance reasons. For more information on what this means, see gtk_tree_model_ref_node(). Please note that nodes that are deleted are not unreffed.
See gtk_tree_model_get(), this version takes a va_list for language bindings to use.
Calls func on each node in model in a depth-first fashion. If func returns TRUE, then the tree ceases to be walked, and gtk_tree_model_foreach() returns.
Emits the "row-changed" signal on tree_model.
Emits the "row-inserted" signal on tree_model
Emits the "row-has-child-toggled" signal on tree_model. This should be called by models after the child state of a node changes.
Emits the "row-deleted" signal on tree_model. This should be called by models after a row has been removed. The location pointed to by path should be the location that the row previously was at. It may not be a valid location anymore.
Emits the "rows-reordered" signal on tree_model. This should be called by models when their rows have been reordered.
the main Gtk struct as a void*
Asks the GtkTreeDragSource to delete the row at path, because it was moved somewhere else via drag-and-drop. Returns FALSE if the deletion fails because path no longer exists, or for some model-specific reason. Should robustly handle a path no longer found in the model!
Asks the GtkTreeDragSource to fill in selection_data with a representation of the row at path. selection_data->target gives the required type of the data. Should robustly handle a path no longer found in the model!
Asks the GtkTreeDragSource whether a particular row can be used as the source of a DND operation. If the source doesn't implement this interface, the row is assumed draggable.
Sets selection data of target type GTK_TREE_MODEL_ROW. Normally used in a drag_data_get handler.
Obtains a tree_model and path from selection data of target type GTK_TREE_MODEL_ROW. Normally called from a drag_data_received handler. This function can only be used if selection_data originates from the same process that's calling this function, because a pointer to the tree model is being passed around. If you aren't in the same process, then you'll get memory corruption. In the GtkTreeDragDest drag_data_received handler, you can assume that selection data of type GTK_TREE_MODEL_ROW is in from the current process. The returned path must be freed with gtk_tree_path_free().
the main Gtk struct as a void*
The ::sort-column-changed signal is emitted when the sort column or sort order of sortable is changed. The signal is emitted before the contents of sortable are resorted. See Also GtkTreeModel, GtkTreeView
Emits a "sort-column-changed" signal on sortable.
Fills in sort_column_id and order with the current sort column and the order. It returns TRUE unless the sort_column_id is GTK_TREE_SORTABLE_DEFAULT_SORT_COLUMN_ID or GTK_TREE_SORTABLE_UNSORTED_SORT_COLUMN_ID.
Sets the current sort column to be sort_column_id. The sortable will resort itself to reflect this change, after emitting a "sort-column-changed" signal. sort_column_id may either be
Sets the comparison function used when sorting to be sort_func. If the current sort column id of sortable is the same as sort_column_id, then the model will sort using this function.
Sets the default comparison function used when sorting to be sort_func. If the current sort column id of sortable is GTK_TREE_SORTABLE_DEFAULT_SORT_COLUMN_ID, then the model will sort using this function. If sort_func is NULL, then there will be no default comparison function. This means that once the model has been sorted, it can't go back to the default state. In this case, when the current sort column id of sortable is GTK_TREE_SORTABLE_DEFAULT_SORT_COLUMN_ID, the model will be unsorted.
Returns TRUE if the model has a default sort function. This is used primarily by GtkTreeViewColumns in order to determine if a model can go back to the default state, or not.
Description The GtkTreeModelSort is a model which implements the GtkTreeSortable interface. It does not hold any data itself, but rather is created with a child model and proxies its data. It has identical column types to this child model, and the changes in the child are propagated. The primary purpose of this model is to provide a way to sort a different model without modifying it. Note that the sort function used by GtkTreeModelSort is not guaranteed to be stable. The use of this is best demonstrated through an example. In the following sample code we create two GtkTreeView widgets each with a view of the same data. As the model is wrapped here by a GtkTreeModelSort, the two GtkTreeViews can each sort their view of the data without affecting the other. By contrast, if we simply put the same model in each widget, then sorting the first would sort the second. To demonstrate how to access the underlying child model from the sort model, the next example will be a callback for the GtkTreeSelection "changed" signal. In this callback, we get a string from COLUMN_1 of the model. We then modify the string, find the same selected row on the child model, and change the row there.