/*
 * This file is part of gtkD.
 *
 * gtkD is free software; you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License
 * as published by the Free Software Foundation; either version 3
 * of the License, or (at your option) any later version, with
 * some exceptions, please read the COPYING file.
 *
 * gtkD is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with gtkD; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110, USA
 */

// generated automatically - do not change
// find conversion definition on APILookup.txt
// implement new conversion functionalities on the wrap.utils pakage


module gio.TestDBus;

private import glib.ConstructionException;
private import glib.Str;
private import gobject.ObjectG;
private import gtkc.gio;
public  import gtkc.giotypes;


/**
 * A helper class for testing code which uses D-Bus without touching the user's
 * session bus.
 * 
 * Note that #GTestDBus modifies the user’s environment, calling setenv().
 * This is not thread-safe, so all #GTestDBus calls should be completed before
 * threads are spawned, or should have appropriate locking to ensure no access
 * conflicts to environment variables shared between #GTestDBus and other
 * threads.
 * 
 * ## Creating unit tests using GTestDBus
 * 
 * Testing of D-Bus services can be tricky because normally we only ever run
 * D-Bus services over an existing instance of the D-Bus daemon thus we
 * usually don't activate D-Bus services that are not yet installed into the
 * target system. The #GTestDBus object makes this easier for us by taking care
 * of the lower level tasks such as running a private D-Bus daemon and looking
 * up uninstalled services in customizable locations, typically in your source
 * code tree.
 * 
 * The first thing you will need is a separate service description file for the
 * D-Bus daemon. Typically a `services` subdirectory of your `tests` directory
 * is a good place to put this file.
 * 
 * The service file should list your service along with an absolute path to the
 * uninstalled service executable in your source tree. Using autotools we would
 * achieve this by adding a file such as `my-server.service.in` in the services
 * directory and have it processed by configure.
 * |[
 * [D-BUS Service]
 * Name=org.gtk.GDBus.Examples.ObjectManager
 * Exec=@abs_top_builddir@/gio/tests/gdbus-example-objectmanager-server
 * ]|
 * You will also need to indicate this service directory in your test
 * fixtures, so you will need to pass the path while compiling your
 * test cases. Typically this is done with autotools with an added
 * preprocessor flag specified to compile your tests such as:
 * |[
 * -DTEST_SERVICES=\""$(abs_top_builddir)/tests/services"\"
 * ]|
 * Once you have a service definition file which is local to your source tree,
 * you can proceed to set up a GTest fixture using the #GTestDBus scaffolding.
 * 
 * An example of a test fixture for D-Bus services can be found
 * here:
 * [gdbus-test-fixture.c](https://git.gnome.org/browse/glib/tree/gio/tests/gdbus-test-fixture.c)
 * 
 * Note that these examples only deal with isolating the D-Bus aspect of your
 * service. To successfully run isolated unit tests on your service you may need
 * some additional modifications to your test case fixture. For example; if your
 * service uses GSettings and installs a schema then it is important that your test service
 * not load the schema in the ordinary installed location (chances are that your service
 * and schema files are not yet installed, or worse; there is an older version of the
 * schema file sitting in the install location).
 * 
 * Most of the time we can work around these obstacles using the
 * environment. Since the environment is inherited by the D-Bus daemon
 * created by #GTestDBus and then in turn inherited by any services the
 * D-Bus daemon activates, using the setup routine for your fixture is
 * a practical place to help sandbox your runtime environment. For the
 * rather typical GSettings case we can work around this by setting
 * `GSETTINGS_SCHEMA_DIR` to the in tree directory holding your schemas
 * in the above fixture_setup() routine.
 * 
 * The GSettings schemas need to be locally pre-compiled for this to work. This can be achieved
 * by compiling the schemas locally as a step before running test cases, an autotools setup might
 * do the following in the directory holding schemas:
 * |[
 * all-am:
 * $(GLIB_COMPILE_SCHEMAS) .
 * 
 * CLEANFILES += gschemas.compiled
 * ]|
 *
 * Since: 2.34
 */
public class TestDBus : ObjectG
{
	/** the main Gtk struct */
	protected GTestDBus* gTestDBus;

	/** Get the main Gtk struct */
	public GTestDBus* getTestDBusStruct()
	{
		return gTestDBus;
	}

	/** the main Gtk struct as a void* */
	protected override void* getStruct()
	{
		return cast(void*)gTestDBus;
	}

	protected override void setStruct(GObject* obj)
	{
		gTestDBus = cast(GTestDBus*)obj;
		super.setStruct(obj);
	}

	/**
	 * Sets our main struct and passes it to the parent class.
	 */
	public this (GTestDBus* gTestDBus, bool ownedRef = false)
	{
		this.gTestDBus = gTestDBus;
		super(cast(GObject*)gTestDBus, ownedRef);
	}


	/** */
	public static GType getType()
	{
		return g_test_dbus_get_type();
	}

	/**
	 * Create a new #GTestDBus object.
	 *
	 * Params:
	 *     flags = a #GTestDBusFlags
	 *
	 * Return: a new #GTestDBus.
	 *
	 * Throws: ConstructionException GTK+ fails to create the object.
	 */
	public this(GTestDBusFlags flags)
	{
		auto p = g_test_dbus_new(flags);
		
		if(p is null)
		{
			throw new ConstructionException("null returned by new");
		}
		
		this(cast(GTestDBus*) p, true);
	}

	/**
	 * Unset DISPLAY and DBUS_SESSION_BUS_ADDRESS env variables to ensure the test
	 * won't use user's session bus.
	 *
	 * This is useful for unit tests that want to verify behaviour when no session
	 * bus is running. It is not necessary to call this if unit test already calls
	 * g_test_dbus_up() before acquiring the session bus.
	 */
	public static void unset()
	{
		g_test_dbus_unset();
	}

	/**
	 * Add a path where dbus-daemon will look up .service files. This can't be
	 * called after g_test_dbus_up().
	 *
	 * Params:
	 *     path = path to a directory containing .service files
	 */
	public void addServiceDir(string path)
	{
		g_test_dbus_add_service_dir(gTestDBus, Str.toStringz(path));
	}

	/**
	 * Stop the session bus started by g_test_dbus_up().
	 *
	 * This will wait for the singleton returned by g_bus_get() or g_bus_get_sync()
	 * is destroyed. This is done to ensure that the next unit test won't get a
	 * leaked singleton from this test.
	 */
	public void down()
	{
		g_test_dbus_down(gTestDBus);
	}

	/**
	 * Get the address on which dbus-daemon is running. If g_test_dbus_up() has not
	 * been called yet, %NULL is returned. This can be used with
	 * g_dbus_connection_new_for_address().
	 *
	 * Return: the address of the bus, or %NULL.
	 */
	public string getBusAddress()
	{
		return Str.toString(g_test_dbus_get_bus_address(gTestDBus));
	}

	/**
	 * Get the flags of the #GTestDBus object.
	 *
	 * Return: the value of #GTestDBus:flags property
	 */
	public GTestDBusFlags getFlags()
	{
		return g_test_dbus_get_flags(gTestDBus);
	}

	/**
	 * Stop the session bus started by g_test_dbus_up().
	 *
	 * Unlike g_test_dbus_down(), this won't verify the #GDBusConnection
	 * singleton returned by g_bus_get() or g_bus_get_sync() is destroyed. Unit
	 * tests wanting to verify behaviour after the session bus has been stopped
	 * can use this function but should still call g_test_dbus_down() when done.
	 */
	public void stop()
	{
		g_test_dbus_stop(gTestDBus);
	}

	/**
	 * Start a dbus-daemon instance and set DBUS_SESSION_BUS_ADDRESS. After this
	 * call, it is safe for unit tests to start sending messages on the session bus.
	 *
	 * If this function is called from setup callback of g_test_add(),
	 * g_test_dbus_down() must be called in its teardown callback.
	 *
	 * If this function is called from unit test's main(), then g_test_dbus_down()
	 * must be called after g_test_run().
	 */
	public void up()
	{
		g_test_dbus_up(gTestDBus);
	}
}