/*
 * This file is part of gtkD.
 *
 * gtkD is free software; you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License
 * as published by the Free Software Foundation; either version 3
 * of the License, or (at your option) any later version, with
 * some exceptions, please read the COPYING file.
 *
 * gtkD is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with gtkD; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110, USA
 */

// generated automatically - do not change
// find conversion definition on APILookup.txt
// implement new conversion functionalities on the wrap.utils pakage


module gio.Application;

private import gio.ActionGroupIF;
private import gio.ActionGroupT;
private import gio.ActionMapIF;
private import gio.ActionMapT;
private import gio.ApplicationCommandLine;
private import gio.Cancellable;
private import gio.DBusConnection;
private import gio.File;
private import gio.FileIF;
private import gio.Notification;
private import glib.ConstructionException;
private import glib.ErrorG;
private import glib.GException;
private import glib.OptionGroup;
private import glib.Str;
private import glib.VariantDict;
private import gobject.ObjectG;
private import gobject.Signals;
public  import gtkc.gdktypes;
private import gtkc.gio;
public  import gtkc.giotypes;


/**
 * A #GApplication is the foundation of an application.  It wraps some
 * low-level platform-specific services and is intended to act as the
 * foundation for higher-level application classes such as
 * #GtkApplication or #MxApplication.  In general, you should not use
 * this class outside of a higher level framework.
 * 
 * GApplication provides convenient life cycle management by maintaining
 * a "use count" for the primary application instance. The use count can
 * be changed using g_application_hold() and g_application_release(). If
 * it drops to zero, the application exits. Higher-level classes such as
 * #GtkApplication employ the use count to ensure that the application
 * stays alive as long as it has any opened windows.
 * 
 * Another feature that GApplication (optionally) provides is process
 * uniqueness. Applications can make use of this functionality by
 * providing a unique application ID. If given, only one application
 * with this ID can be running at a time per session. The session
 * concept is platform-dependent, but corresponds roughly to a graphical
 * desktop login. When your application is launched again, its
 * arguments are passed through platform communication to the already
 * running program. The already running instance of the program is
 * called the "primary instance"; for non-unique applications this is
 * the always the current instance. On Linux, the D-Bus session bus
 * is used for communication.
 * 
 * The use of #GApplication differs from some other commonly-used
 * uniqueness libraries (such as libunique) in important ways. The
 * application is not expected to manually register itself and check
 * if it is the primary instance. Instead, the main() function of a
 * #GApplication should do very little more than instantiating the
 * application instance, possibly connecting signal handlers, then
 * calling g_application_run(). All checks for uniqueness are done
 * internally. If the application is the primary instance then the
 * startup signal is emitted and the mainloop runs. If the application
 * is not the primary instance then a signal is sent to the primary
 * instance and g_application_run() promptly returns. See the code
 * examples below.
 * 
 * If used, the expected form of an application identifier is very close
 * to that of of a
 * [DBus bus name](http://dbus.freedesktop.org/doc/dbus-specification.html#message-protocol-names-interface).
 * Examples include: "com.example.MyApp", "org.example.internal-apps.Calculator".
 * For details on valid application identifiers, see g_application_id_is_valid().
 * 
 * On Linux, the application identifier is claimed as a well-known bus name
 * on the user's session bus.  This means that the uniqueness of your
 * application is scoped to the current session.  It also means that your
 * application may provide additional services (through registration of other
 * object paths) at that bus name.  The registration of these object paths
 * should be done with the shared GDBus session bus.  Note that due to the
 * internal architecture of GDBus, method calls can be dispatched at any time
 * (even if a main loop is not running).  For this reason, you must ensure that
 * any object paths that you wish to register are registered before #GApplication
 * attempts to acquire the bus name of your application (which happens in
 * g_application_register()).  Unfortunately, this means that you cannot use
 * g_application_get_is_remote() to decide if you want to register object paths.
 * 
 * GApplication also implements the #GActionGroup and #GActionMap
 * interfaces and lets you easily export actions by adding them with
 * g_action_map_add_action(). When invoking an action by calling
 * g_action_group_activate_action() on the application, it is always
 * invoked in the primary instance. The actions are also exported on
 * the session bus, and GIO provides the #GDBusActionGroup wrapper to
 * conveniently access them remotely. GIO provides a #GDBusMenuModel wrapper
 * for remote access to exported #GMenuModels.
 * 
 * There is a number of different entry points into a GApplication:
 * 
 * - via 'Activate' (i.e. just starting the application)
 * 
 * - via 'Open' (i.e. opening some files)
 * 
 * - by handling a command-line
 * 
 * - via activating an action
 * 
 * The #GApplication::startup signal lets you handle the application
 * initialization for all of these in a single place.
 * 
 * Regardless of which of these entry points is used to start the
 * application, GApplication passes some "platform data from the
 * launching instance to the primary instance, in the form of a
 * #GVariant dictionary mapping strings to variants. To use platform
 * data, override the @before_emit or @after_emit virtual functions
 * in your #GApplication subclass. When dealing with
 * #GApplicationCommandLine objects, the platform data is
 * directly available via g_application_command_line_get_cwd(),
 * g_application_command_line_get_environ() and
 * g_application_command_line_get_platform_data().
 * 
 * As the name indicates, the platform data may vary depending on the
 * operating system, but it always includes the current directory (key
 * "cwd"), and optionally the environment (ie the set of environment
 * variables and their values) of the calling process (key "environ").
 * The environment is only added to the platform data if the
 * %G_APPLICATION_SEND_ENVIRONMENT flag is set. #GApplication subclasses
 * can add their own platform data by overriding the @add_platform_data
 * virtual function. For instance, #GtkApplication adds startup notification
 * data in this way.
 * 
 * To parse commandline arguments you may handle the
 * #GApplication::command-line signal or override the local_command_line()
 * vfunc, to parse them in either the primary instance or the local instance,
 * respectively.
 * 
 * For an example of opening files with a GApplication, see
 * [gapplication-example-open.c](https://git.gnome.org/browse/glib/tree/gio/tests/gapplication-example-open.c).
 * 
 * For an example of using actions with GApplication, see
 * [gapplication-example-actions.c](https://git.gnome.org/browse/glib/tree/gio/tests/gapplication-example-actions.c).
 * 
 * For an example of using extra D-Bus hooks with GApplication, see
 * [gapplication-example-dbushooks.c](https://git.gnome.org/browse/glib/tree/gio/tests/gapplication-example-dbushooks.c).
 *
 * Since: 2.28
 */
public class Application : ObjectG, ActionGroupIF, ActionMapIF
{
	/** the main Gtk struct */
	protected GApplication* gApplication;

	/** Get the main Gtk struct */
	public GApplication* getApplicationStruct()
	{
		return gApplication;
	}

	/** the main Gtk struct as a void* */
	protected override void* getStruct()
	{
		return cast(void*)gApplication;
	}

	protected override void setStruct(GObject* obj)
	{
		gApplication = cast(GApplication*)obj;
		super.setStruct(obj);
	}

	/**
	 * Sets our main struct and passes it to the parent class.
	 */
	public this (GApplication* gApplication, bool ownedRef = false)
	{
		this.gApplication = gApplication;
		super(cast(GObject*)gApplication, ownedRef);
	}

	// add the ActionGroup capabilities
	mixin ActionGroupT!(GApplication);

	// add the ActionMap capabilities
	mixin ActionMapT!(GApplication);


	/** */
	public static GType getType()
	{
		return g_application_get_type();
	}

	/**
	 * Creates a new #GApplication instance.
	 *
	 * If non-%NULL, the application id must be valid.  See
	 * g_application_id_is_valid().
	 *
	 * If no application ID is given then some features of #GApplication
	 * (most notably application uniqueness) will be disabled.
	 *
	 * Params:
	 *     applicationId = the application id
	 *     flags = the application flags
	 *
	 * Return: a new #GApplication instance
	 *
	 * Throws: ConstructionException GTK+ fails to create the object.
	 */
	public this(string applicationId, GApplicationFlags flags)
	{
		auto p = g_application_new(Str.toStringz(applicationId), flags);
		
		if(p is null)
		{
			throw new ConstructionException("null returned by new");
		}
		
		this(cast(GApplication*) p, true);
	}

	/**
	 * Returns the default #GApplication instance for this process.
	 *
	 * Normally there is only one #GApplication per process and it becomes
	 * the default when it is created.  You can exercise more control over
	 * this by using g_application_set_default().
	 *
	 * If there is no default application then %NULL is returned.
	 *
	 * Return: the default application for this process, or %NULL
	 *
	 * Since: 2.32
	 */
	public static Application getDefault()
	{
		auto p = g_application_get_default();
		
		if(p is null)
		{
			return null;
		}
		
		return ObjectG.getDObject!(Application)(cast(GApplication*) p);
	}

	/**
	 * Checks if @application_id is a valid application identifier.
	 *
	 * A valid ID is required for calls to g_application_new() and
	 * g_application_set_application_id().
	 *
	 * For convenience, the restrictions on application identifiers are
	 * reproduced here:
	 *
	 * - Application identifiers must contain only the ASCII characters
	 * "[A-Z][a-z][0-9]_-." and must not begin with a digit.
	 *
	 * - Application identifiers must contain at least one '.' (period)
	 * character (and thus at least three elements).
	 *
	 * - Application identifiers must not begin or end with a '.' (period)
	 * character.
	 *
	 * - Application identifiers must not contain consecutive '.' (period)
	 * characters.
	 *
	 * - Application identifiers must not exceed 255 characters.
	 *
	 * Params:
	 *     applicationId = a potential application identifier
	 *
	 * Return: %TRUE if @application_id is valid
	 */
	public static bool idIsValid(string applicationId)
	{
		return g_application_id_is_valid(Str.toStringz(applicationId)) != 0;
	}

	/**
	 * Activates the application.
	 *
	 * In essence, this results in the #GApplication::activate signal being
	 * emitted in the primary instance.
	 *
	 * The application must be registered before calling this function.
	 *
	 * Since: 2.28
	 */
	public void activate()
	{
		g_application_activate(gApplication);
	}

	/**
	 * Add an option to be handled by @application.
	 *
	 * Calling this function is the equivalent of calling
	 * g_application_add_main_option_entries() with a single #GOptionEntry
	 * that has its arg_data member set to %NULL.
	 *
	 * The parsed arguments will be packed into a #GVariantDict which
	 * is passed to #GApplication::handle-local-options. If
	 * %G_APPLICATION_HANDLES_COMMAND_LINE is set, then it will also
	 * be sent to the primary instance. See
	 * g_application_add_main_option_entries() for more details.
	 *
	 * See #GOptionEntry for more documentation of the arguments.
	 *
	 * Params:
	 *     longName = the long name of an option used to specify it in a commandline
	 *     shortName = the short name of an option
	 *     flags = flags from #GOptionFlags
	 *     arg = the type of the option, as a #GOptionArg
	 *     description = the description for the option in `--help` output
	 *     argDescription = the placeholder to use for the extra argument
	 *         parsed by the option in `--help` output
	 *
	 * Since: 2.42
	 */
	public void addMainOption(string longName, char shortName, GOptionFlags flags, GOptionArg arg, string description, string argDescription)
	{
		g_application_add_main_option(gApplication, Str.toStringz(longName), shortName, flags, arg, Str.toStringz(description), Str.toStringz(argDescription));
	}

	/**
	 * Adds main option entries to be handled by @application.
	 *
	 * This function is comparable to g_option_context_add_main_entries().
	 *
	 * After the commandline arguments are parsed, the
	 * #GApplication::handle-local-options signal will be emitted.  At this
	 * point, the application can inspect the values pointed to by @arg_data
	 * in the given #GOptionEntrys.
	 *
	 * Unlike #GOptionContext, #GApplication supports giving a %NULL
	 * @arg_data for a non-callback #GOptionEntry.  This results in the
	 * argument in question being packed into a #GVariantDict which is also
	 * passed to #GApplication::handle-local-options, where it can be
	 * inspected and modified.  If %G_APPLICATION_HANDLES_COMMAND_LINE is
	 * set, then the resulting dictionary is sent to the primary instance,
	 * where g_application_command_line_get_options_dict() will return it.
	 * This "packing" is done according to the type of the argument --
	 * booleans for normal flags, strings for strings, bytestrings for
	 * filenames, etc.  The packing only occurs if the flag is given (ie: we
	 * do not pack a "false" #GVariant in the case that a flag is missing).
	 *
	 * In general, it is recommended that all commandline arguments are
	 * parsed locally.  The options dictionary should then be used to
	 * transmit the result of the parsing to the primary instance, where
	 * g_variant_dict_lookup() can be used.  For local options, it is
	 * possible to either use @arg_data in the usual way, or to consult (and
	 * potentially remove) the option from the options dictionary.
	 *
	 * This function is new in GLib 2.40.  Before then, the only real choice
	 * was to send all of the commandline arguments (options and all) to the
	 * primary instance for handling.  #GApplication ignored them completely
	 * on the local side.  Calling this function "opts in" to the new
	 * behaviour, and in particular, means that unrecognised options will be
	 * treated as errors.  Unrecognised options have never been ignored when
	 * %G_APPLICATION_HANDLES_COMMAND_LINE is unset.
	 *
	 * If #GApplication::handle-local-options needs to see the list of
	 * filenames, then the use of %G_OPTION_REMAINING is recommended.  If
	 * @arg_data is %NULL then %G_OPTION_REMAINING can be used as a key into
	 * the options dictionary.  If you do use %G_OPTION_REMAINING then you
	 * need to handle these arguments for yourself because once they are
	 * consumed, they will no longer be visible to the default handling
	 * (which treats them as filenames to be opened).
	 *
	 * Params:
	 *     entries = a
	 *         %NULL-terminated list of #GOptionEntrys
	 *
	 * Since: 2.40
	 */
	public void addMainOptionEntries(GOptionEntry[] entries)
	{
		g_application_add_main_option_entries(gApplication, entries.ptr);
	}

	/**
	 * Adds a #GOptionGroup to the commandline handling of @application.
	 *
	 * This function is comparable to g_option_context_add_group().
	 *
	 * Unlike g_application_add_main_option_entries(), this function does
	 * not deal with %NULL @arg_data and never transmits options to the
	 * primary instance.
	 *
	 * The reason for that is because, by the time the options arrive at the
	 * primary instance, it is typically too late to do anything with them.
	 * Taking the GTK option group as an example: GTK will already have been
	 * initialised by the time the #GApplication::command-line handler runs.
	 * In the case that this is not the first-running instance of the
	 * application, the existing instance may already have been running for
	 * a very long time.
	 *
	 * This means that the options from #GOptionGroup are only really usable
	 * in the case that the instance of the application being run is the
	 * first instance.  Passing options like `--display=` or `--gdk-debug=`
	 * on future runs will have no effect on the existing primary instance.
	 *
	 * Calling this function will cause the options in the supplied option
	 * group to be parsed, but it does not cause you to be "opted in" to the
	 * new functionality whereby unrecognised options are rejected even if
	 * %G_APPLICATION_HANDLES_COMMAND_LINE was given.
	 *
	 * Params:
	 *     group = a #GOptionGroup
	 *
	 * Since: 2.40
	 */
	public void addOptionGroup(OptionGroup group)
	{
		g_application_add_option_group(gApplication, (group is null) ? null : group.getOptionGroupStruct());
	}

	/**
	 * Marks @application as busy (see g_application_mark_busy()) while
	 * @property on @object is %TRUE.
	 *
	 * The binding holds a reference to @application while it is active, but
	 * not to @object. Instead, the binding is destroyed when @object is
	 * finalized.
	 *
	 * Params:
	 *     object = a #GObject
	 *     property = the name of a boolean property of @object
	 *
	 * Since: 2.44
	 */
	public void bindBusyProperty(ObjectG object, string property)
	{
		g_application_bind_busy_property(gApplication, (object is null) ? null : object.getObjectGStruct(), Str.toStringz(property));
	}

	/**
	 * Gets the unique identifier for @application.
	 *
	 * Return: the identifier for @application, owned by @application
	 *
	 * Since: 2.28
	 */
	public string getApplicationId()
	{
		return Str.toString(g_application_get_application_id(gApplication));
	}

	/**
	 * Gets the #GDBusConnection being used by the application, or %NULL.
	 *
	 * If #GApplication is using its D-Bus backend then this function will
	 * return the #GDBusConnection being used for uniqueness and
	 * communication with the desktop environment and other instances of the
	 * application.
	 *
	 * If #GApplication is not using D-Bus then this function will return
	 * %NULL.  This includes the situation where the D-Bus backend would
	 * normally be in use but we were unable to connect to the bus.
	 *
	 * This function must not be called before the application has been
	 * registered.  See g_application_get_is_registered().
	 *
	 * Return: a #GDBusConnection, or %NULL
	 *
	 * Since: 2.34
	 */
	public DBusConnection getDbusConnection()
	{
		auto p = g_application_get_dbus_connection(gApplication);
		
		if(p is null)
		{
			return null;
		}
		
		return ObjectG.getDObject!(DBusConnection)(cast(GDBusConnection*) p);
	}

	/**
	 * Gets the D-Bus object path being used by the application, or %NULL.
	 *
	 * If #GApplication is using its D-Bus backend then this function will
	 * return the D-Bus object path that #GApplication is using.  If the
	 * application is the primary instance then there is an object published
	 * at this path.  If the application is not the primary instance then
	 * the result of this function is undefined.
	 *
	 * If #GApplication is not using D-Bus then this function will return
	 * %NULL.  This includes the situation where the D-Bus backend would
	 * normally be in use but we were unable to connect to the bus.
	 *
	 * This function must not be called before the application has been
	 * registered.  See g_application_get_is_registered().
	 *
	 * Return: the object path, or %NULL
	 *
	 * Since: 2.34
	 */
	public string getDbusObjectPath()
	{
		return Str.toString(g_application_get_dbus_object_path(gApplication));
	}

	/**
	 * Gets the flags for @application.
	 *
	 * See #GApplicationFlags.
	 *
	 * Return: the flags for @application
	 *
	 * Since: 2.28
	 */
	public GApplicationFlags getFlags()
	{
		return g_application_get_flags(gApplication);
	}

	/**
	 * Gets the current inactivity timeout for the application.
	 *
	 * This is the amount of time (in milliseconds) after the last call to
	 * g_application_release() before the application stops running.
	 *
	 * Return: the timeout, in milliseconds
	 *
	 * Since: 2.28
	 */
	public uint getInactivityTimeout()
	{
		return g_application_get_inactivity_timeout(gApplication);
	}

	/**
	 * Gets the application's current busy state, as set through
	 * g_application_mark_busy() or g_application_bind_busy_property().
	 *
	 * Return: %TRUE if @application is currenty marked as busy
	 *
	 * Since: 2.44
	 */
	public bool getIsBusy()
	{
		return g_application_get_is_busy(gApplication) != 0;
	}

	/**
	 * Checks if @application is registered.
	 *
	 * An application is registered if g_application_register() has been
	 * successfully called.
	 *
	 * Return: %TRUE if @application is registered
	 *
	 * Since: 2.28
	 */
	public bool getIsRegistered()
	{
		return g_application_get_is_registered(gApplication) != 0;
	}

	/**
	 * Checks if @application is remote.
	 *
	 * If @application is remote then it means that another instance of
	 * application already exists (the 'primary' instance).  Calls to
	 * perform actions on @application will result in the actions being
	 * performed by the primary instance.
	 *
	 * The value of this property cannot be accessed before
	 * g_application_register() has been called.  See
	 * g_application_get_is_registered().
	 *
	 * Return: %TRUE if @application is remote
	 *
	 * Since: 2.28
	 */
	public bool getIsRemote()
	{
		return g_application_get_is_remote(gApplication) != 0;
	}

	/**
	 * Gets the resource base path of @application.
	 *
	 * See g_application_set_resource_base_path() for more information.
	 *
	 * Return: the base resource path, if one is set
	 *
	 * Since: 2.42
	 */
	public string getResourceBasePath()
	{
		return Str.toString(g_application_get_resource_base_path(gApplication));
	}

	/**
	 * Increases the use count of @application.
	 *
	 * Use this function to indicate that the application has a reason to
	 * continue to run.  For example, g_application_hold() is called by GTK+
	 * when a toplevel window is on the screen.
	 *
	 * To cancel the hold, call g_application_release().
	 */
	public void hold()
	{
		g_application_hold(gApplication);
	}

	/**
	 * Increases the busy count of @application.
	 *
	 * Use this function to indicate that the application is busy, for instance
	 * while a long running operation is pending.
	 *
	 * The busy state will be exposed to other processes, so a session shell will
	 * use that information to indicate the state to the user (e.g. with a
	 * spinner).
	 *
	 * To cancel the busy indication, use g_application_unmark_busy().
	 *
	 * Since: 2.38
	 */
	public void markBusy()
	{
		g_application_mark_busy(gApplication);
	}

	/**
	 * Opens the given files.
	 *
	 * In essence, this results in the #GApplication::open signal being emitted
	 * in the primary instance.
	 *
	 * @n_files must be greater than zero.
	 *
	 * @hint is simply passed through to the ::open signal.  It is
	 * intended to be used by applications that have multiple modes for
	 * opening files (eg: "view" vs "edit", etc).  Unless you have a need
	 * for this functionality, you should use "".
	 *
	 * The application must be registered before calling this function
	 * and it must have the %G_APPLICATION_HANDLES_OPEN flag set.
	 *
	 * Params:
	 *     files = an array of #GFiles to open
	 *     nFiles = the length of the @files array
	 *     hint = a hint (or ""), but never %NULL
	 *
	 * Since: 2.28
	 */
	public void open(FileIF[] files, string hint)
	{
		GFile*[] filesArray = new GFile*[files.length];
		for ( int i = 0; i < files.length; i++ )
		{
			filesArray[i] = files[i].getFileStruct();
		}
		
		g_application_open(gApplication, filesArray.ptr, cast(int)files.length, Str.toStringz(hint));
	}

	/**
	 * Immediately quits the application.
	 *
	 * Upon return to the mainloop, g_application_run() will return,
	 * calling only the 'shutdown' function before doing so.
	 *
	 * The hold count is ignored.
	 *
	 * The result of calling g_application_run() again after it returns is
	 * unspecified.
	 *
	 * Since: 2.32
	 */
	public void quit()
	{
		g_application_quit(gApplication);
	}

	/**
	 * Attempts registration of the application.
	 *
	 * This is the point at which the application discovers if it is the
	 * primary instance or merely acting as a remote for an already-existing
	 * primary instance.  This is implemented by attempting to acquire the
	 * application identifier as a unique bus name on the session bus using
	 * GDBus.
	 *
	 * If there is no application ID or if %G_APPLICATION_NON_UNIQUE was
	 * given, then this process will always become the primary instance.
	 *
	 * Due to the internal architecture of GDBus, method calls can be
	 * dispatched at any time (even if a main loop is not running).  For
	 * this reason, you must ensure that any object paths that you wish to
	 * register are registered before calling this function.
	 *
	 * If the application has already been registered then %TRUE is
	 * returned with no work performed.
	 *
	 * The #GApplication::startup signal is emitted if registration succeeds
	 * and @application is the primary instance (including the non-unique
	 * case).
	 *
	 * In the event of an error (such as @cancellable being cancelled, or a
	 * failure to connect to the session bus), %FALSE is returned and @error
	 * is set appropriately.
	 *
	 * Note: the return value of this function is not an indicator that this
	 * instance is or is not the primary instance of the application.  See
	 * g_application_get_is_remote() for that.
	 *
	 * Params:
	 *     cancellable = a #GCancellable, or %NULL
	 *
	 * Return: %TRUE if registration succeeded
	 *
	 * Since: 2.28
	 *
	 * Throws: GException on failure.
	 */
	public bool register(Cancellable cancellable)
	{
		GError* err = null;
		
		auto p = g_application_register(gApplication, (cancellable is null) ? null : cancellable.getCancellableStruct(), &err) != 0;
		
		if (err !is null)
		{
			throw new GException( new ErrorG(err) );
		}
		
		return p;
	}

	/**
	 * Decrease the use count of @application.
	 *
	 * When the use count reaches zero, the application will stop running.
	 *
	 * Never call this function except to cancel the effect of a previous
	 * call to g_application_hold().
	 */
	public void release()
	{
		g_application_release(gApplication);
	}

	/**
	 * Runs the application.
	 *
	 * This function is intended to be run from main() and its return value
	 * is intended to be returned by main(). Although you are expected to pass
	 * the @argc, @argv parameters from main() to this function, it is possible
	 * to pass %NULL if @argv is not available or commandline handling is not
	 * required.  Note that on Windows, @argc and @argv are ignored, and
	 * g_win32_get_command_line() is called internally (for proper support
	 * of Unicode commandline arguments).
	 *
	 * #GApplication will attempt to parse the commandline arguments.  You
	 * can add commandline flags to the list of recognised options by way of
	 * g_application_add_main_option_entries().  After this, the
	 * #GApplication::handle-local-options signal is emitted, from which the
	 * application can inspect the values of its #GOptionEntrys.
	 *
	 * #GApplication::handle-local-options is a good place to handle options
	 * such as `--version`, where an immediate reply from the local process is
	 * desired (instead of communicating with an already-running instance).
	 * A #GApplication::handle-local-options handler can stop further processing
	 * by returning a non-negative value, which then becomes the exit status of
	 * the process.
	 *
	 * What happens next depends on the flags: if
	 * %G_APPLICATION_HANDLES_COMMAND_LINE was specified then the remaining
	 * commandline arguments are sent to the primary instance, where a
	 * #GApplication::command-line signal is emitted.  Otherwise, the
	 * remaining commandline arguments are assumed to be a list of files.
	 * If there are no files listed, the application is activated via the
	 * #GApplication::activate signal.  If there are one or more files, and
	 * %G_APPLICATION_HANDLES_OPEN was specified then the files are opened
	 * via the #GApplication::open signal.
	 *
	 * If you are interested in doing more complicated local handling of the
	 * commandline then you should implement your own #GApplication subclass
	 * and override local_command_line(). In this case, you most likely want
	 * to return %TRUE from your local_command_line() implementation to
	 * suppress the default handling. See
	 * [gapplication-example-cmdline2.c][gapplication-example-cmdline2]
	 * for an example.
	 *
	 * If, after the above is done, the use count of the application is zero
	 * then the exit status is returned immediately.  If the use count is
	 * non-zero then the default main context is iterated until the use count
	 * falls to zero, at which point 0 is returned.
	 *
	 * If the %G_APPLICATION_IS_SERVICE flag is set, then the service will
	 * run for as much as 10 seconds with a use count of zero while waiting
	 * for the message that caused the activation to arrive.  After that,
	 * if the use count falls to zero the application will exit immediately,
	 * except in the case that g_application_set_inactivity_timeout() is in
	 * use.
	 *
	 * This function sets the prgname (g_set_prgname()), if not already set,
	 * to the basename of argv[0].
	 *
	 * Since 2.40, applications that are not explicitly flagged as services
	 * or launchers (ie: neither %G_APPLICATION_IS_SERVICE or
	 * %G_APPLICATION_IS_LAUNCHER are given as flags) will check (from the
	 * default handler for local_command_line) if "--gapplication-service"
	 * was given in the command line.  If this flag is present then normal
	 * commandline processing is interrupted and the
	 * %G_APPLICATION_IS_SERVICE flag is set.  This provides a "compromise"
	 * solution whereby running an application directly from the commandline
	 * will invoke it in the normal way (which can be useful for debugging)
	 * while still allowing applications to be D-Bus activated in service
	 * mode.  The D-Bus service file should invoke the executable with
	 * "--gapplication-service" as the sole commandline argument.  This
	 * approach is suitable for use by most graphical applications but
	 * should not be used from applications like editors that need precise
	 * control over when processes invoked via the commandline will exit and
	 * what their exit status will be.
	 *
	 * Params:
	 *     argc = the argc from main() (or 0 if @argv is %NULL)
	 *     argv = the argv from main(), or %NULL
	 *
	 * Return: the exit status
	 *
	 * Since: 2.28
	 */
	public int run(string[] argv)
	{
		return g_application_run(gApplication, cast(int)argv.length, Str.toStringzArray(argv));
	}

	/**
	 * Sends a notification on behalf of @application to the desktop shell.
	 * There is no guarantee that the notification is displayed immediately,
	 * or even at all.
	 *
	 * Notifications may persist after the application exits. It will be
	 * D-Bus-activated when the notification or one of its actions is
	 * activated.
	 *
	 * Modifying @notification after this call has no effect. However, the
	 * object can be reused for a later call to this function.
	 *
	 * @id may be any string that uniquely identifies the event for the
	 * application. It does not need to be in any special format. For
	 * example, "new-message" might be appropriate for a notification about
	 * new messages.
	 *
	 * If a previous notification was sent with the same @id, it will be
	 * replaced with @notification and shown again as if it was a new
	 * notification. This works even for notifications sent from a previous
	 * execution of the application, as long as @id is the same string.
	 *
	 * @id may be %NULL, but it is impossible to replace or withdraw
	 * notifications without an id.
	 *
	 * If @notification is no longer relevant, it can be withdrawn with
	 * g_application_withdraw_notification().
	 *
	 * Params:
	 *     id = id of the notification, or %NULL
	 *     notification = the #GNotification to send
	 *
	 * Since: 2.40
	 */
	public void sendNotification(string id, Notification notification)
	{
		g_application_send_notification(gApplication, Str.toStringz(id), (notification is null) ? null : notification.getNotificationStruct());
	}

	/**
	 * This used to be how actions were associated with a #GApplication.
	 * Now there is #GActionMap for that.
	 *
	 * Deprecated: Use the #GActionMap interface instead.  Never ever
	 * mix use of this API with use of #GActionMap on the same @application
	 * or things will go very badly wrong.  This function is known to
	 * introduce buggy behaviour (ie: signals not emitted on changes to the
	 * action group), so you should really use #GActionMap instead.
	 *
	 * Params:
	 *     actionGroup = a #GActionGroup, or %NULL
	 *
	 * Since: 2.28
	 */
	public void setActionGroup(ActionGroupIF actionGroup)
	{
		g_application_set_action_group(gApplication, (actionGroup is null) ? null : actionGroup.getActionGroupStruct());
	}

	/**
	 * Sets the unique identifier for @application.
	 *
	 * The application id can only be modified if @application has not yet
	 * been registered.
	 *
	 * If non-%NULL, the application id must be valid.  See
	 * g_application_id_is_valid().
	 *
	 * Params:
	 *     applicationId = the identifier for @application
	 *
	 * Since: 2.28
	 */
	public void setApplicationId(string applicationId)
	{
		g_application_set_application_id(gApplication, Str.toStringz(applicationId));
	}

	/**
	 * Sets or unsets the default application for the process, as returned
	 * by g_application_get_default().
	 *
	 * This function does not take its own reference on @application.  If
	 * @application is destroyed then the default application will revert
	 * back to %NULL.
	 *
	 * Since: 2.32
	 */
	public void setDefault()
	{
		g_application_set_default(gApplication);
	}

	/**
	 * Sets the flags for @application.
	 *
	 * The flags can only be modified if @application has not yet been
	 * registered.
	 *
	 * See #GApplicationFlags.
	 *
	 * Params:
	 *     flags = the flags for @application
	 *
	 * Since: 2.28
	 */
	public void setFlags(GApplicationFlags flags)
	{
		g_application_set_flags(gApplication, flags);
	}

	/**
	 * Sets the current inactivity timeout for the application.
	 *
	 * This is the amount of time (in milliseconds) after the last call to
	 * g_application_release() before the application stops running.
	 *
	 * This call has no side effects of its own.  The value set here is only
	 * used for next time g_application_release() drops the use count to
	 * zero.  Any timeouts currently in progress are not impacted.
	 *
	 * Params:
	 *     inactivityTimeout = the timeout, in milliseconds
	 *
	 * Since: 2.28
	 */
	public void setInactivityTimeout(uint inactivityTimeout)
	{
		g_application_set_inactivity_timeout(gApplication, inactivityTimeout);
	}

	/**
	 * Sets (or unsets) the base resource path of @application.
	 *
	 * The path is used to automatically load various [application
	 * resources][gresource] such as menu layouts and action descriptions.
	 * The various types of resources will be found at fixed names relative
	 * to the given base path.
	 *
	 * By default, the resource base path is determined from the application
	 * ID by prefixing '/' and replacing each '.' with '/'.  This is done at
	 * the time that the #GApplication object is constructed.  Changes to
	 * the application ID after that point will not have an impact on the
	 * resource base path.
	 *
	 * As an example, if the application has an ID of "org.example.app" then
	 * the default resource base path will be "/org/example/app".  If this
	 * is a #GtkApplication (and you have not manually changed the path)
	 * then Gtk will then search for the menus of the application at
	 * "/org/example/app/gtk/menus.ui".
	 *
	 * See #GResource for more information about adding resources to your
	 * application.
	 *
	 * You can disable automatic resource loading functionality by setting
	 * the path to %NULL.
	 *
	 * Changing the resource base path once the application is running is
	 * not recommended.  The point at which the resource path is consulted
	 * for forming paths for various purposes is unspecified.
	 *
	 * Params:
	 *     resourcePath = the resource path to use
	 *
	 * Since: 2.42
	 */
	public void setResourceBasePath(string resourcePath)
	{
		g_application_set_resource_base_path(gApplication, Str.toStringz(resourcePath));
	}

	/**
	 * Destroys a binding between @property and the busy state of
	 * @application that was previously created with
	 * g_application_bind_busy_property().
	 *
	 * Params:
	 *     object = a #GObject
	 *     property = the name of a boolean property of @object
	 *
	 * Since: 2.44
	 */
	public void unbindBusyProperty(ObjectG object, string property)
	{
		g_application_unbind_busy_property(gApplication, (object is null) ? null : object.getObjectGStruct(), Str.toStringz(property));
	}

	/**
	 * Decreases the busy count of @application.
	 *
	 * When the busy count reaches zero, the new state will be propagated
	 * to other processes.
	 *
	 * This function must only be called to cancel the effect of a previous
	 * call to g_application_mark_busy().
	 *
	 * Since: 2.38
	 */
	public void unmarkBusy()
	{
		g_application_unmark_busy(gApplication);
	}

	/**
	 * Withdraws a notification that was sent with
	 * g_application_send_notification().
	 *
	 * This call does nothing if a notification with @id doesn't exist or
	 * the notification was never sent.
	 *
	 * This function works even for notifications sent in previous
	 * executions of this application, as long @id is the same as it was for
	 * the sent notification.
	 *
	 * Note that notifications are dismissed when the user clicks on one
	 * of the buttons in a notification or triggers its default action, so
	 * there is no need to explicitly withdraw the notification in that case.
	 *
	 * Params:
	 *     id = id of a previously sent notification
	 *
	 * Since: 2.40
	 */
	public void withdrawNotification(string id)
	{
		g_application_withdraw_notification(gApplication, Str.toStringz(id));
	}

	int[string] connectedSignals;

	void delegate(Application)[] onActivateListeners;
	/**
	 * The ::activate signal is emitted on the primary instance when an
	 * activation occurs. See g_application_activate().
	 */
	void addOnActivate(void delegate(Application) dlg, ConnectFlags connectFlags=cast(ConnectFlags)0)
	{
		if ( "activate" !in connectedSignals )
		{
			Signals.connectData(
				this,
				"activate",
				cast(GCallback)&callBackActivate,
				cast(void*)this,
				null,
				connectFlags);
			connectedSignals["activate"] = 1;
		}
		onActivateListeners ~= dlg;
	}
	extern(C) static void callBackActivate(GApplication* applicationStruct, Application _application)
	{
		foreach ( void delegate(Application) dlg; _application.onActivateListeners )
		{
			dlg(_application);
		}
	}

	int delegate(ApplicationCommandLine, Application)[] onCommandLineListeners;
	/**
	 * The ::command-line signal is emitted on the primary instance when
	 * a commandline is not handled locally. See g_application_run() and
	 * the #GApplicationCommandLine documentation for more information.
	 *
	 * Params:
	 *     commandLine = a #GApplicationCommandLine representing the
	 *         passed commandline
	 *
	 * Return: An integer that is set as the exit status for the calling
	 *     process. See g_application_command_line_set_exit_status().
	 */
	void addOnCommandLine(int delegate(ApplicationCommandLine, Application) dlg, ConnectFlags connectFlags=cast(ConnectFlags)0)
	{
		if ( "command-line" !in connectedSignals )
		{
			Signals.connectData(
				this,
				"command-line",
				cast(GCallback)&callBackCommandLine,
				cast(void*)this,
				null,
				connectFlags);
			connectedSignals["command-line"] = 1;
		}
		onCommandLineListeners ~= dlg;
	}
	extern(C) static int callBackCommandLine(GApplication* applicationStruct, GApplicationCommandLine* commandLine, Application _application)
	{
		return _application.onCommandLineListeners[0](ObjectG.getDObject!(ApplicationCommandLine)(commandLine), _application);
	}

	int delegate(VariantDict, Application)[] onHandleLocalOptionsListeners;
	/**
	 * The ::handle-local-options signal is emitted on the local instance
	 * after the parsing of the commandline options has occurred.
	 *
	 * You can add options to be recognised during commandline option
	 * parsing using g_application_add_main_option_entries() and
	 * g_application_add_option_group().
	 *
	 * Signal handlers can inspect @options (along with values pointed to
	 * from the @arg_data of an installed #GOptionEntrys) in order to
	 * decide to perform certain actions, including direct local handling
	 * (which may be useful for options like --version).
	 *
	 * In the event that the application is marked
	 * %G_APPLICATION_HANDLES_COMMAND_LINE the "normal processing" will
	 * send the @options dictionary to the primary instance where it can be
	 * read with g_application_command_line_get_options_dict().  The signal
	 * handler can modify the dictionary before returning, and the
	 * modified dictionary will be sent.
	 *
	 * In the event that %G_APPLICATION_HANDLES_COMMAND_LINE is not set,
	 * "normal processing" will treat the remaining uncollected command
	 * line arguments as filenames or URIs.  If there are no arguments,
	 * the application is activated by g_application_activate().  One or
	 * more arguments results in a call to g_application_open().
	 *
	 * If you want to handle the local commandline arguments for yourself
	 * by converting them to calls to g_application_open() or
	 * g_action_group_activate_action() then you must be sure to register
	 * the application first.  You should probably not call
	 * g_application_activate() for yourself, however: just return -1 and
	 * allow the default handler to do it for you.  This will ensure that
	 * the `--gapplication-service` switch works properly (i.e. no activation
	 * in that case).
	 *
	 * Note that this signal is emitted from the default implementation of
	 * local_command_line().  If you override that function and don't
	 * chain up then this signal will never be emitted.
	 *
	 * You can override local_command_line() if you need more powerful
	 * capabilities than what is provided here, but this should not
	 * normally be required.
	 *
	 * Params:
	 *     options = the options dictionary
	 *
	 * Return: an exit code. If you have handled your options and want
	 *     to exit the process, return a non-negative option, 0 for success,
	 *     and a positive value for failure. To continue, return -1 to let
	 *     the default option processing continue.
	 *
	 * Since: 2.40
	 */
	void addOnHandleLocalOptions(int delegate(VariantDict, Application) dlg, ConnectFlags connectFlags=cast(ConnectFlags)0)
	{
		if ( "handle-local-options" !in connectedSignals )
		{
			Signals.connectData(
				this,
				"handle-local-options",
				cast(GCallback)&callBackHandleLocalOptions,
				cast(void*)this,
				null,
				connectFlags);
			connectedSignals["handle-local-options"] = 1;
		}
		onHandleLocalOptionsListeners ~= dlg;
	}
	extern(C) static int callBackHandleLocalOptions(GApplication* applicationStruct, GVariantDict* options, Application _application)
	{
		return _application.onHandleLocalOptionsListeners[0](new VariantDict(options), _application);
	}

	void delegate(void*, int, string, Application)[] onOpenListeners;
	/**
	 * The ::open signal is emitted on the primary instance when there are
	 * files to open. See g_application_open() for more information.
	 *
	 * Params:
	 *     files = an array of #GFiles
	 *     nFiles = the length of @files
	 *     hint = a hint provided by the calling instance
	 */
	void addOnOpen(void delegate(void*, int, string, Application) dlg, ConnectFlags connectFlags=cast(ConnectFlags)0)
	{
		if ( "open" !in connectedSignals )
		{
			Signals.connectData(
				this,
				"open",
				cast(GCallback)&callBackOpen,
				cast(void*)this,
				null,
				connectFlags);
			connectedSignals["open"] = 1;
		}
		onOpenListeners ~= dlg;
	}
	extern(C) static void callBackOpen(GApplication* applicationStruct, void* files, int nFiles, char* hint, Application _application)
	{
		foreach ( void delegate(void*, int, string, Application) dlg; _application.onOpenListeners )
		{
			dlg(files, nFiles, Str.toString(hint), _application);
		}
	}

	void delegate(Application)[] onShutdownListeners;
	/**
	 * The ::shutdown signal is emitted only on the registered primary instance
	 * immediately after the main loop terminates.
	 */
	void addOnShutdown(void delegate(Application) dlg, ConnectFlags connectFlags=cast(ConnectFlags)0)
	{
		if ( "shutdown" !in connectedSignals )
		{
			Signals.connectData(
				this,
				"shutdown",
				cast(GCallback)&callBackShutdown,
				cast(void*)this,
				null,
				connectFlags);
			connectedSignals["shutdown"] = 1;
		}
		onShutdownListeners ~= dlg;
	}
	extern(C) static void callBackShutdown(GApplication* applicationStruct, Application _application)
	{
		foreach ( void delegate(Application) dlg; _application.onShutdownListeners )
		{
			dlg(_application);
		}
	}

	void delegate(Application)[] onStartupListeners;
	/**
	 * The ::startup signal is emitted on the primary instance immediately
	 * after registration. See g_application_register().
	 */
	void addOnStartup(void delegate(Application) dlg, ConnectFlags connectFlags=cast(ConnectFlags)0)
	{
		if ( "startup" !in connectedSignals )
		{
			Signals.connectData(
				this,
				"startup",
				cast(GCallback)&callBackStartup,
				cast(void*)this,
				null,
				connectFlags);
			connectedSignals["startup"] = 1;
		}
		onStartupListeners ~= dlg;
	}
	extern(C) static void callBackStartup(GApplication* applicationStruct, Application _application)
	{
		foreach ( void delegate(Application) dlg; _application.onStartupListeners )
		{
			dlg(_application);
		}
	}
}