DBusObjectManagerClient

#GDBusObjectManagerClient is used to create, monitor and delete object proxies for remote objects exported by a #GDBusObjectManagerServer (or any code implementing the org.freedesktop.DBus.ObjectManager

interface).

Once an instance of this type has been created, you can connect to the #GDBusObjectManager::object-added and #GDBusObjectManager::object-removed signals and inspect the #GDBusObjectProxy objects returned by g_dbus_object_manager_get_objects().

If the name for a #GDBusObjectManagerClient is not owned by anyone at object construction time, the default behavior is to request the message bus to launch an owner for the name. This behavior can be disabled using the %G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_DO_NOT_AUTO_START flag. It's also worth noting that this only works if the name of interest is activatable in the first place. E.g. in some cases it is not possible to launch an owner for the requested name. In this case, #GDBusObjectManagerClient object construction still succeeds but there will be no object proxies (e.g. g_dbus_object_manager_get_objects() returns the empty list) and the #GDBusObjectManagerClient:name-owner property is %NULL.

The owner of the requested name can come and go (for example consider a system service being restarted) – #GDBusObjectManagerClient handles this case too; simply connect to the #GObject::notify signal to watch for changes on the #GDBusObjectManagerClient:name-owner property. When the name owner vanishes, the behavior is that #GDBusObjectManagerClient:name-owner is set to %NULL (this includes emission of the #GObject::notify signal) and then #GDBusObjectManager::object-removed signals are synthesized for all currently existing object proxies. Since #GDBusObjectManagerClient:name-owner is %NULL when this happens, you can use this information to disambiguate a synthesized signal from a genuine signal caused by object removal on the remote #GDBusObjectManager. Similarly, when a new name owner appears, #GDBusObjectManager::object-added signals are synthesized while #GDBusObjectManagerClient:name-owner is still %NULL. Only when all object proxies have been added, the #GDBusObjectManagerClient:name-owner is set to the new name owner (this includes emission of the #GObject::notify signal). Furthermore, you are guaranteed that #GDBusObjectManagerClient:name-owner will alternate between a name owner (e.g. :1.42) and %NULL even in the case where the name of interest is atomically replaced

Ultimately, #GDBusObjectManagerClient is used to obtain #GDBusProxy instances. All signals (including the org.freedesktop.DBus.Properties::PropertiesChanged signal) delivered to #GDBusProxy instances are guaranteed to originate from the name owner. This guarantee along with the behavior described above, means that certain race conditions including the "half the proxy is from the old owner and the other half is from the new owner" problem cannot happen.

To avoid having the application connect to signals on the returned #GDBusObjectProxy and #GDBusProxy objects, the #GDBusObject::interface-added, #GDBusObject::interface-removed, #GDBusProxy::g-properties-changed and #GDBusProxy::g-signal signals are also emitted on the #GDBusObjectManagerClient instance managing these objects. The signals emitted are #GDBusObjectManager::interface-added, #GDBusObjectManager::interface-removed, #GDBusObjectManagerClient::interface-proxy-properties-changed and #GDBusObjectManagerClient::interface-proxy-signal.

Note that all callbacks and signals are emitted in the [thread-default main context][g-main-context-push-thread-default] that the #GDBusObjectManagerClient object was constructed in. Additionally, the #GDBusObjectProxy and #GDBusProxy objects originating from the #GDBusObjectManagerClient object will be created in the same context and, consequently, will deliver signals in the same main loop.

class DBusObjectManagerClient : ObjectG , AsyncInitableIF , DBusObjectManagerIF , InitableIF {}

Constructors

this
this(GDBusObjectManagerClient* gDBusObjectManagerClient, bool ownedRef)

Sets our main struct and passes it to the parent class.

this
this(AsyncResultIF res, bool forBus)

Finishes an operation started with g_dbus_object_manager_client_new().

this
this(GBusType busType, GDBusObjectManagerClientFlags flags, string name, string objectPath, GDBusProxyTypeFunc getProxyTypeFunc, void* getProxyTypeUserData, GDestroyNotify getProxyTypeDestroyNotify, Cancellable cancellable)

Like g_dbus_object_manager_client_new_sync() but takes a #GBusType instead of a #GDBusConnection.

this
this(DBusConnection connection, GDBusObjectManagerClientFlags flags, string name, string objectPath, GDBusProxyTypeFunc getProxyTypeFunc, void* getProxyTypeUserData, GDestroyNotify getProxyTypeDestroyNotify, Cancellable cancellable)

Creates a new #GDBusObjectManagerClient object.

Members

Functions

addOnInterfaceProxyPropertiesChanged
void addOnInterfaceProxyPropertiesChanged(void delegate(DBusObjectProxy, DBusProxy, Variant, string[], DBusObjectManagerClient) dlg, ConnectFlags connectFlags)

Emitted when one or more D-Bus properties on proxy changes. The local cache has already been updated when this signal fires. Note that both @changed_properties and @invalidated_properties are guaranteed to never be %NULL (either may be empty though).

addOnInterfaceProxySignal
void addOnInterfaceProxySignal(void delegate(DBusObjectProxy, DBusProxy, string, string, Variant, DBusObjectManagerClient) dlg, ConnectFlags connectFlags)

Emitted when a D-Bus signal is received on @interface_proxy.

getConnection
DBusConnection getConnection()

Gets the #GDBusConnection used by @manager.

getDBusObjectManagerClientStruct
GDBusObjectManagerClient* getDBusObjectManagerClientStruct()

Get the main Gtk struct

getFlags
GDBusObjectManagerClientFlags getFlags()

Gets the flags that @manager was constructed with.

getName
string getName()

Gets the name that @manager is for, or %NULL if not a message bus connection.

getNameOwner
string getNameOwner()

The unique name that owns the name that @manager is for or %NULL if no-one currently owns that name. You can connect to the #GObject::notify signal to track changes to the #GDBusObjectManagerClient:name-owner property.

getStruct
void* getStruct()

the main Gtk struct as a void*

setStruct
void setStruct(GObject* obj)
Undocumented in source. Be warned that the author may not have intended to support it.

Mixins

__anonymous
mixin AsyncInitableT!(GDBusObjectManagerClient)
Undocumented in source.
__anonymous
mixin DBusObjectManagerT!(GDBusObjectManagerClient)
Undocumented in source.
__anonymous
mixin InitableT!(GDBusObjectManagerClient)
Undocumented in source.

Static functions

callBackInterfaceProxyPropertiesChanged
void callBackInterfaceProxyPropertiesChanged(GDBusObjectManagerClient* dbusobjectmanagerclientStruct, GDBusObjectProxy* objectProxy, GDBusProxy* interfaceProxy, GVariant* changedProperties, char** invalidatedProperties, DBusObjectManagerClient _dbusobjectmanagerclient)
Undocumented in source. Be warned that the author may not have intended to support it.
callBackInterfaceProxySignal
void callBackInterfaceProxySignal(GDBusObjectManagerClient* dbusobjectmanagerclientStruct, GDBusObjectProxy* objectProxy, GDBusProxy* interfaceProxy, char* senderName, char* signalName, GVariant* parameters, DBusObjectManagerClient _dbusobjectmanagerclient)
Undocumented in source. Be warned that the author may not have intended to support it.
getType
GType getType()
newForBus
void newForBus(GBusType busType, GDBusObjectManagerClientFlags flags, string name, string objectPath, GDBusProxyTypeFunc getProxyTypeFunc, void* getProxyTypeUserData, GDestroyNotify getProxyTypeDestroyNotify, Cancellable cancellable, GAsyncReadyCallback callback, void* userData)

Like g_dbus_object_manager_client_new() but takes a #GBusType instead of a #GDBusConnection.

newObjectManagerClient
void newObjectManagerClient(DBusConnection connection, GDBusObjectManagerClientFlags flags, string name, string objectPath, GDBusProxyTypeFunc getProxyTypeFunc, void* getProxyTypeUserData, GDestroyNotify getProxyTypeDestroyNotify, Cancellable cancellable, GAsyncReadyCallback callback, void* userData)

Asynchronously creates a new #GDBusObjectManagerClient object.

Variables

connectedSignals
int[string] connectedSignals;
Undocumented in source.
gDBusObjectManagerClient
GDBusObjectManagerClient* gDBusObjectManagerClient;

the main Gtk struct

onInterfaceProxyPropertiesChangedListeners
void delegate(DBusObjectProxy, DBusProxy, Variant, string[], DBusObjectManagerClient)[] onInterfaceProxyPropertiesChangedListeners;
Undocumented in source.
onInterfaceProxySignalListeners
void delegate(DBusObjectProxy, DBusProxy, string, string, Variant, DBusObjectManagerClient)[] onInterfaceProxySignalListeners;
Undocumented in source.

Inherited Members

From ObjectG

gObject
GObject* gObject;

the main Gtk struct

getObjectGStruct
GObject* getObjectGStruct()

Get the main Gtk struct

getStruct
void* getStruct()

the main Gtk struct as a void*

isGcRoot
bool isGcRoot;
Undocumented in source.
destroyNotify
void destroyNotify(ObjectG obj)
Undocumented in source. Be warned that the author may not have intended to support it.
toggleNotify
void toggleNotify(ObjectG obj, GObject* object, int isLastRef)
Undocumented in source. Be warned that the author may not have intended to support it.
~this
~this()
Undocumented in source.
getDObject
RT getDObject(U obj, bool ownedRef)

Gets a D Object from the objects table of associations.

setStruct
void setStruct(GObject* obj)
Undocumented in source. Be warned that the author may not have intended to support it.
setProperty
void setProperty(string propertyName, int value)
setProperty
void setProperty(string propertyName, string value)
setProperty
void setProperty(string propertyName, long value)
setProperty
void setProperty(string propertyName, ulong value)
unref
deprecated void unref(ObjectG obj)
Undocumented in source. Be warned that the author may not have intended to support it.
doref
deprecated ObjectG doref(ObjectG obj)
Undocumented in source. Be warned that the author may not have intended to support it.
connectedSignals
int[string] connectedSignals;
Undocumented in source.
onNotifyListeners
void delegate(ParamSpec, ObjectG)[] onNotifyListeners;
Undocumented in source.
addOnNotify
void addOnNotify(void delegate(ParamSpec, ObjectG) dlg, string property, ConnectFlags connectFlags)

The notify signal is emitted on an object when one of its properties has been changed. Note that getting this signal doesn't guarantee that the value of the property has actually changed, it may also be emitted when the setter for the property is called to reinstate the previous value.

callBackNotify
void callBackNotify(GObject* gobjectStruct, GParamSpec* pspec, ObjectG _objectG)
Undocumented in source. Be warned that the author may not have intended to support it.
getType
GType getType()
compatControl
size_t compatControl(size_t what, void* data)
interfaceFindProperty
ParamSpec interfaceFindProperty(void* gIface, string propertyName)

Find the #GParamSpec with the given name for an interface. Generally, the interface vtable passed in as @g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().

interfaceInstallProperty
void interfaceInstallProperty(void* gIface, ParamSpec pspec)

Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.

interfaceListProperties
ParamSpec[] interfaceListProperties(void* gIface)

Lists the properties of an interface.Generally, the interface vtable passed in as @g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().

addToggleRef
void addToggleRef(GToggleNotify notify, void* data)

Increases the reference count of the object by one and sets a callback to be called when all other references to the object are dropped, or when this is already the last reference to the object and another reference is established.

addWeakPointer
void addWeakPointer(void* weakPointerLocation)

Adds a weak reference from weak_pointer to @object to indicate that the pointer located at @weak_pointer_location is only valid during the lifetime of @object. When the @object is finalized, @weak_pointer will be set to %NULL.

bindProperty
Binding bindProperty(string sourceProperty, ObjectG target, string targetProperty, GBindingFlags flags)

Creates a binding between @source_property on @source and @target_property on @target. Whenever the @source_property is changed the @target_property is updated using the same value. For instance:

bindPropertyFull
Binding bindPropertyFull(string sourceProperty, ObjectG target, string targetProperty, GBindingFlags flags, GBindingTransformFunc transformTo, GBindingTransformFunc transformFrom, void* userData, GDestroyNotify notify)

Complete version of g_object_bind_property().

bindPropertyWithClosures
Binding bindPropertyWithClosures(string sourceProperty, ObjectG target, string targetProperty, GBindingFlags flags, Closure transformTo, Closure transformFrom)

Creates a binding between @source_property on @source and @target_property on @target, allowing you to set the transformation functions to be used by the binding.

dupData
void* dupData(string key, GDuplicateFunc dupFunc, void* userData)

This is a variant of g_object_get_data() which returns a 'duplicate' of the value. @dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object.

dupQdata
void* dupQdata(GQuark quark, GDuplicateFunc dupFunc, void* userData)

This is a variant of g_object_get_qdata() which returns a 'duplicate' of the value. @dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object.

forceFloating
void forceFloating()

This function is intended for #GObject implementations to re-enforce a floating[floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().

freezeNotify
void freezeNotify()

Increases the freeze count on @object. If the freeze count is non-zero, the emission of "notify" signals on @object is stopped. The signals are queued until the freeze count is decreased to zero. Duplicate notifications are squashed so that at most one #GObject::notify signal is emitted for each property modified while the object is frozen.

getData
void* getData(string key)

Gets a named field from the objects table of associations (see g_object_set_data()).

getProperty
void getProperty(string propertyName, Value value)

Gets a property of an object. @value must have been initialized to the expected type of the property (or a type to which the expected type can be transformed) using g_value_init().

getQdata
void* getQdata(GQuark quark)

This function gets back user data pointers stored via g_object_set_qdata().

getValist
void getValist(string firstPropertyName, void* varArgs)

Gets properties of an object.

isFloating
bool isFloating()

Checks whether @object has a floating[floating-ref] reference.

notify
void notify(string propertyName)

Emits a "notify" signal for the property @property_name on @object.

notifyByPspec
void notifyByPspec(ParamSpec pspec)

Emits a "notify" signal for the property specified by @pspec on @object.

doref
ObjectG doref()

Increases the reference count of @object.

refSink
ObjectG refSink()

Increase the reference count of @object, and possibly remove the floating[floating-ref] reference, if @object has a floating reference.

removeToggleRef
void removeToggleRef(GToggleNotify notify, void* data)

Removes a reference added with g_object_add_toggle_ref(). The reference count of the object is decreased by one.

removeWeakPointer
void removeWeakPointer(void* weakPointerLocation)

Removes a weak reference from @object that was previously added using g_object_add_weak_pointer(). The @weak_pointer_location has to match the one used with g_object_add_weak_pointer().

replaceData
bool replaceData(string key, void* oldval, void* newval, GDestroyNotify destroy, GDestroyNotify* oldDestroy)

Compares the user data for the key @key on @object with @oldval, and if they are the same, replaces @oldval with @newval.

replaceQdata
bool replaceQdata(GQuark quark, void* oldval, void* newval, GDestroyNotify destroy, GDestroyNotify* oldDestroy)

Compares the user data for the key @quark on @object with @oldval, and if they are the same, replaces @oldval with @newval.

runDispose
void runDispose()

Releases all references to other objects. This can be used to break reference cycles.

setData
void setData(string key, void* data)

Each object carries around a table of associations from strings to pointers. This function lets you set an association.

setDataFull
void setDataFull(string key, void* data, GDestroyNotify destroy)

Like g_object_set_data() except it adds notification for when the association is destroyed, either by setting it to a different value or when the object is destroyed.

setProperty
void setProperty(string propertyName, Value value)

Sets a property on an object.

setQdata
void setQdata(GQuark quark, void* data)

This sets an opaque, named pointer on an object. The name is specified through a #GQuark (retrived e.g. via g_quark_from_static_string()), and the pointer can be gotten back from the @object with g_object_get_qdata() until the @object is finalized. Setting a previously set user data pointer, overrides (frees) the old pointer set, using #NULL as pointer essentially removes the data stored.

setQdataFull
void setQdataFull(GQuark quark, void* data, GDestroyNotify destroy)

This function works like g_object_set_qdata(), but in addition, a void (*destroy) (gpointer) function may be specified which is called with @data as argument when the @object is finalized, or the data is being overwritten by a call to g_object_set_qdata() with the same @quark.

setValist
void setValist(string firstPropertyName, void* varArgs)

Sets properties on an object.

stealData
void* stealData(string key)

Remove a specified datum from the object's data associations, without invoking the association's destroy handler.

stealQdata
void* stealQdata(GQuark quark)

This function gets back user data pointers stored via g_object_set_qdata() and removes the @data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update user data pointers with a destroy notifier, for example: |[<!-- language="C" --> void object_add_to_user_list (GObject *object, const gchar *new_string) { // the quark, naming the object data GQuark quark_string_list = g_quark_from_static_string ("my-string-list"); // retrive the old string list GList *list = g_object_steal_qdata (object, quark_string_list);

thawNotify
void thawNotify()

Reverts the effect of a previous call to g_object_freeze_notify(). The freeze count is decreased on @object and when it reaches zero, queued "notify" signals are emitted.

unref
void unref()

Decreases the reference count of @object. When its reference count drops to 0, the object is finalized (i.e. its memory is freed).

watchClosure
void watchClosure(Closure closure)

This function essentially limits the life time of the @closure to the life time of the object. That is, when the object is finalized, the @closure is invalidated by calling g_closure_invalidate() on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, g_object_ref() and g_object_unref() are added as marshal guards to the @closure, to ensure that an extra reference count is held on @object during invocation of the @closure. Usually, this function will be called on closures that use this @object as closure data.

weakRef
void weakRef(GWeakNotify notify, void* data)

Adds a weak reference callback to an object. Weak references are used for notification when an object is finalized. They are called "weak references" because they allow you to safely hold a pointer to an object without calling g_object_ref() (g_object_ref() adds a strong reference, that is, forces the object to stay alive).

weakUnref
void weakUnref(GWeakNotify notify, void* data)

Removes a weak reference callback to an object.

clearObject
void clearObject(ObjectG objectPtr)

Clears a reference to a #GObject.

From AsyncInitableIF

getAsyncInitableStruct
GAsyncInitable* getAsyncInitableStruct()

Get the main Gtk struct

getStruct
void* getStruct()

the main Gtk struct as a void*

newValistAsync
void newValistAsync(GType objectType, string firstPropertyName, void* varArgs, int ioPriority, Cancellable cancellable, GAsyncReadyCallback callback, void* userData)

Helper function for constructing #GAsyncInitable object. This is similar to g_object_new_valist() but also initializes the object asynchronously.

newvAsync
void newvAsync(GType objectType, uint nParameters, GParameter* parameters, int ioPriority, Cancellable cancellable, GAsyncReadyCallback callback, void* userData)

Helper function for constructing #GAsyncInitable object. This is similar to g_object_newv() but also initializes the object asynchronously.

initAsync
void initAsync(int ioPriority, Cancellable cancellable, GAsyncReadyCallback callback, void* userData)

Starts asynchronous initialization of the object implementing the interface. This must be done before any real use of the object after initial construction. If the object also implements #GInitable you can optionally call g_initable_init() instead.

initFinish
bool initFinish(AsyncResultIF res)

Finishes asynchronous initialization and returns the result. See g_async_initable_init_async().

newFinish
ObjectG newFinish(AsyncResultIF res)

Finishes the async construction for the various g_async_initable_new calls, returning the created object or %NULL on error.

From DBusObjectManagerIF

getDBusObjectManagerStruct
GDBusObjectManager* getDBusObjectManagerStruct()

Get the main Gtk struct

getStruct
void* getStruct()

the main Gtk struct as a void*

getInterface
DBusInterfaceIF getInterface(string objectPath, string interfaceName)

Gets the interface proxy for @interface_name at @object_path, if any.

getObject
DBusObjectIF getObject(string objectPath)

Gets the #GDBusObjectProxy at @object_path, if any.

getObjectPath
string getObjectPath()

Gets the object path that @manager is for.

getObjects
ListG getObjects()

Gets all #GDBusObject objects known to @manager.

onInterfaceAddedListeners
void delegate(DBusObjectIF, DBusInterfaceIF, DBusObjectManagerIF)[] onInterfaceAddedListeners [@property getter]
Undocumented in source.
addOnInterfaceAdded
void addOnInterfaceAdded(void delegate(DBusObjectIF, DBusInterfaceIF, DBusObjectManagerIF) dlg, ConnectFlags connectFlags)

Emitted when @interface is added to @object.

onInterfaceRemovedListeners
void delegate(DBusObjectIF, DBusInterfaceIF, DBusObjectManagerIF)[] onInterfaceRemovedListeners [@property getter]
Undocumented in source.
addOnInterfaceRemoved
void addOnInterfaceRemoved(void delegate(DBusObjectIF, DBusInterfaceIF, DBusObjectManagerIF) dlg, ConnectFlags connectFlags)

Emitted when @interface has been removed from @object.

onObjectAddedListeners
void delegate(DBusObjectIF, DBusObjectManagerIF)[] onObjectAddedListeners [@property getter]
Undocumented in source.
addOnObjectAdded
void addOnObjectAdded(void delegate(DBusObjectIF, DBusObjectManagerIF) dlg, ConnectFlags connectFlags)

Emitted when @object is added to @manager.

onObjectRemovedListeners
void delegate(DBusObjectIF, DBusObjectManagerIF)[] onObjectRemovedListeners [@property getter]
Undocumented in source.
addOnObjectRemoved
void addOnObjectRemoved(void delegate(DBusObjectIF, DBusObjectManagerIF) dlg, ConnectFlags connectFlags)

Emitted when @object is removed from @manager.

From InitableIF

getInitableStruct
GInitable* getInitableStruct()

Get the main Gtk struct

getStruct
void* getStruct()

the main Gtk struct as a void*

init
bool init(Cancellable cancellable)

Initializes the object implementing the interface.

Meta

Since

2.30