/*
 * This file is part of gtkD.
 *
 * gtkD is free software; you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License
 * as published by the Free Software Foundation; either version 3
 * of the License, or (at your option) any later version, with
 * some exceptions, please read the COPYING file.
 *
 * gtkD is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with gtkD; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110, USA
 */

// generated automatically - do not change
// find conversion definition on APILookup.txt
// implement new conversion functionalities on the wrap.utils pakage


module gtk.FileChooserDialog;

private import glib.ConstructionException;
private import gtk.Dialog;
private import gtk.FileChooserIF;
private import gtk.FileChooserT;
private import gtk.Window;
private import gtkc.gtk;
public  import gtkc.gtktypes;


/**
 * #GtkFileChooserDialog is a dialog box suitable for use with
 * “File/Open” or “File/Save as” commands.  This widget works by
 * putting a #GtkFileChooserWidget inside a #GtkDialog.  It exposes
 * the #GtkFileChooser interface, so you can use all of the
 * #GtkFileChooser functions on the file chooser dialog as well as
 * those for #GtkDialog.
 * 
 * Note that #GtkFileChooserDialog does not have any methods of its
 * own.  Instead, you should use the functions that work on a
 * #GtkFileChooser.
 * 
 * ## Typical usage ## {#gtkfilechooser-typical-usage}
 * 
 * In the simplest of cases, you can the following code to use
 * #GtkFileChooserDialog to select a file for opening:
 * 
 * |[
 * GtkWidget *dialog;
 * GtkFileChooserAction action = GTK_FILE_CHOOSER_ACTION_OPEN;
 * gint res;
 * 
 * dialog = gtk_file_chooser_dialog_new ("Open File",
 * parent_window,
 * action,
 * _("_Cancel"),
 * GTK_RESPONSE_CANCEL,
 * _("_Open"),
 * GTK_RESPONSE_ACCEPT,
 * NULL);
 * 
 * res = gtk_dialog_run (GTK_DIALOG (dialog));
 * if (res == GTK_RESPONSE_ACCEPT)
 * {
 * char *filename;
 * GtkFileChooser *chooser = GTK_FILE_CHOOSER (dialog);
 * filename = gtk_file_chooser_get_filename (chooser);
 * open_file (filename);
 * g_free (filename);
 * }
 * 
 * gtk_widget_destroy (dialog);
 * ]|
 * 
 * To use a dialog for saving, you can use this:
 * 
 * |[
 * GtkWidget *dialog;
 * GtkFileChooser *chooser;
 * GtkFileChooserAction action = GTK_FILE_CHOOSER_ACTION_SAVE;
 * gint res;
 * 
 * dialog = gtk_file_chooser_dialog_new ("Save File",
 * parent_window,
 * action,
 * _("_Cancel"),
 * GTK_RESPONSE_CANCEL,
 * _("_Save"),
 * GTK_RESPONSE_ACCEPT,
 * NULL);
 * chooser = GTK_FILE_CHOOSER (dialog);
 * 
 * gtk_file_chooser_set_do_overwrite_confirmation (chooser, TRUE);
 * 
 * if (user_edited_a_new_document)
 * gtk_file_chooser_set_current_name (chooser,
 * _("Untitled document"));
 * else
 * gtk_file_chooser_set_filename (chooser,
 * existing_filename);
 * 
 * res = gtk_dialog_run (GTK_DIALOG (dialog));
 * if (res == GTK_RESPONSE_ACCEPT)
 * {
 * char *filename;
 * 
 * filename = gtk_file_chooser_get_filename (chooser);
 * save_to_file (filename);
 * g_free (filename);
 * }
 * 
 * gtk_widget_destroy (dialog);
 * ]|
 * 
 * ## Setting up a file chooser dialog ## {#gtkfilechooserdialog-setting-up}
 * 
 * There are various cases in which you may need to use a #GtkFileChooserDialog:
 * 
 * - To select a file for opening. Use #GTK_FILE_CHOOSER_ACTION_OPEN.
 * 
 * - To save a file for the first time. Use #GTK_FILE_CHOOSER_ACTION_SAVE,
 * and suggest a name such as “Untitled” with gtk_file_chooser_set_current_name().
 * 
 * - To save a file under a different name. Use #GTK_FILE_CHOOSER_ACTION_SAVE,
 * and set the existing filename with gtk_file_chooser_set_filename().
 * 
 * - To choose a folder instead of a file. Use #GTK_FILE_CHOOSER_ACTION_SELECT_FOLDER.
 * 
 * Note that old versions of the file chooser’s documentation suggested
 * using gtk_file_chooser_set_current_folder() in various
 * situations, with the intention of letting the application
 * suggest a reasonable default folder.  This is no longer
 * considered to be a good policy, as now the file chooser is
 * able to make good suggestions on its own.  In general, you
 * should only cause the file chooser to show a specific folder
 * when it is appropriate to use gtk_file_chooser_set_filename(),
 * i.e. when you are doing a Save As command and you already
 * have a file saved somewhere.
 * 
 * ## Response Codes ## {#gtkfilechooserdialog-responses}
 * 
 * #GtkFileChooserDialog inherits from #GtkDialog, so buttons that
 * go in its action area have response codes such as
 * #GTK_RESPONSE_ACCEPT and #GTK_RESPONSE_CANCEL.  For example, you
 * could call gtk_file_chooser_dialog_new() as follows:
 * 
 * |[
 * GtkWidget *dialog;
 * GtkFileChooserAction action = GTK_FILE_CHOOSER_ACTION_OPEN;
 * 
 * dialog = gtk_file_chooser_dialog_new ("Open File",
 * parent_window,
 * action,
 * _("_Cancel"),
 * GTK_RESPONSE_CANCEL,
 * _("_Open"),
 * GTK_RESPONSE_ACCEPT,
 * NULL);
 * ]|
 * 
 * This will create buttons for “Cancel” and “Open” that use stock
 * response identifiers from #GtkResponseType.  For most dialog
 * boxes you can use your own custom response codes rather than the
 * ones in #GtkResponseType, but #GtkFileChooserDialog assumes that
 * its “accept”-type action, e.g. an “Open” or “Save” button,
 * will have one of the following response codes:
 * 
 * - #GTK_RESPONSE_ACCEPT
 * - #GTK_RESPONSE_OK
 * - #GTK_RESPONSE_YES
 * - #GTK_RESPONSE_APPLY
 * 
 * This is because #GtkFileChooserDialog must intercept responses
 * and switch to folders if appropriate, rather than letting the
 * dialog terminate — the implementation uses these known
 * response codes to know which responses can be blocked if
 * appropriate.
 * 
 * To summarize, make sure you use a
 * [stock response code][gtkfilechooserdialog-responses]
 * when you use #GtkFileChooserDialog to ensure proper operation.
 */
public class FileChooserDialog : Dialog, FileChooserIF
{
	/** the main Gtk struct */
	protected GtkFileChooserDialog* gtkFileChooserDialog;

	/** Get the main Gtk struct */
	public GtkFileChooserDialog* getFileChooserDialogStruct()
	{
		return gtkFileChooserDialog;
	}

	/** the main Gtk struct as a void* */
	protected override void* getStruct()
	{
		return cast(void*)gtkFileChooserDialog;
	}

	protected override void setStruct(GObject* obj)
	{
		gtkFileChooserDialog = cast(GtkFileChooserDialog*)obj;
		super.setStruct(obj);
	}

	/**
	 * Sets our main struct and passes it to the parent class.
	 */
	public this (GtkFileChooserDialog* gtkFileChooserDialog, bool ownedRef = false)
	{
		this.gtkFileChooserDialog = gtkFileChooserDialog;
		super(cast(GtkDialog*)gtkFileChooserDialog, ownedRef);
	}

	// add the FileChooser capabilities
	mixin FileChooserT!(GtkFileChooserDialog);

	/**
	 * Creates a new FileChooserDialog. This function is analogous to
	 * gtk_dialog_new_with_buttons().
	 * Since: 2.4
	 * Params:
	 *  title = Title of the dialog, or NULL
	 *  parent = Transient parent of the dialog, or NULL
	 *  action = Open or save mode for the dialog
	 *  buttonsText = text to go in the buttons
	 *  responses = response ID's for the buttons
	 * Throws: ConstructionException GTK+ fails to create the object.
	 */
	this(string title, Window parent, FileChooserAction action,  string[] buttonsText=null, ResponseType[] responses=null)
	{
		if ( buttonsText  is  null )
		{
			buttonsText ~= "OK";
			buttonsText ~= "Cancel";
		}
		if ( responses  is  null )
		{
			responses ~= ResponseType.OK;
			responses ~= ResponseType.CANCEL;
		}
		
		auto p = gtk_file_chooser_dialog_new(
			Str.toStringz(title),
			(parent is null) ? null : parent.getWindowStruct(),
			action,
			null,
			0);
		
		if(p is null)
		{
			throw new ConstructionException("null returned by gtk_file_chooser_dialog_new");
		}
		
		this(cast(GtkFileChooserDialog*) p);
		
		addButtons(buttonsText, responses);
	}

	/**
	 */

	public static GType getType()
	{
		return gtk_file_chooser_dialog_get_type();
	}
}