Task

#GstTask is used by #GstElement and #GstPad to provide the data passing threads in a #GstPipeline.

A #GstPad will typically start a #GstTask to push or pull data to/from the peer pads. Most source elements start a #GstTask to push data. In some cases a demuxer element can start a #GstTask to pull data from a peer element. This is typically done when the demuxer can perform random access on the upstream peer element for improved performance.

Although convenience functions exist on #GstPad to start/pause/stop tasks, it might sometimes be needed to create a #GstTask manually if it is not related to a #GstPad.

Before the #GstTask can be run, it needs a #GRecMutex that can be set with gst_task_set_lock().

The task can be started, paused and stopped with gst_task_start(), gst_task_pause() and gst_task_stop() respectively or with the gst_task_set_state() function.

A #GstTask will repeatedly call the #GstTaskFunction with the user data that was provided when creating the task with gst_task_new(). While calling the function it will acquire the provided lock. The provided lock is released when the task pauses or stops.

Stopping a task with gst_task_stop() will not immediately make sure the task is not running anymore. Use gst_task_join() to make sure the task is completely stopped and the thread is stopped.

After creating a #GstTask, use gst_object_unref() to free its resources. This can only be done when the task is not running anymore.

Task functions can send a #GstMessage to send out-of-band data to the application. The application can receive messages from the #GstBus in its mainloop.

For debugging purposes, the task will configure its object name as the thread name on Linux. Please note that the object name should be configured before the task is started; changing the object name after the task has been started, has no effect on the thread name.

Constructors

this
this(GstTask* gstTask, bool ownedRef)

Sets our main struct and passes it to the parent class.

this
this(GstTaskFunction func, void* userData, GDestroyNotify notify)

Create a new Task that will repeatedly call the provided @func with @user_data as a parameter. Typically the task will run in a new thread.

Members

Functions

getPool
TaskPool getPool()

Get the #GstTaskPool that this task will use for its streaming threads.

getState
GstTaskState getState()

Get the current state of the task.

getStruct
void* getStruct()

the main Gtk struct as a void*

getTaskStruct
GstTask* getTaskStruct()

Get the main Gtk struct

join
bool join()

Joins @task. After this call, it is safe to unref the task and clean up the lock set with gst_task_set_lock().

pause
bool pause()

Pauses @task. This method can also be called on a task in the stopped state, in which case a thread will be started and will remain in the paused state. This function does not wait for the task to complete the paused state.

setEnterCallback
void setEnterCallback(GstTaskThreadFunc enterFunc, void* userData, GDestroyNotify notify)

Call @enter_func when the task function of @task is entered. @user_data will be passed to @enter_func and @notify will be called when @user_data is no longer referenced.

setLeaveCallback
void setLeaveCallback(GstTaskThreadFunc leaveFunc, void* userData, GDestroyNotify notify)

Call @leave_func when the task function of @task is left. @user_data will be passed to @leave_func and @notify will be called when @user_data is no longer referenced.

setLock
void setLock(RecMutex mutex)

Set the mutex used by the task. The mutex will be acquired before calling the #GstTaskFunction.

setPool
void setPool(TaskPool pool)

Set @pool as the new GstTaskPool for @task. Any new streaming threads that will be created by @task will now use @pool.

setState
bool setState(GstTaskState state)

Sets the state of @task to @state.

setStruct
void setStruct(GObject* obj)
Undocumented in source. Be warned that the author may not have intended to support it.
start
bool start()

Starts @task. The @task must have a lock associated with it using gst_task_set_lock() or this function will return %FALSE.

stop
bool stop()

Stops @task. This method merely schedules the task to stop and will not wait for the task to have completely stopped. Use gst_task_join() to stop and wait for completion.

Static functions

cleanupAll
void cleanupAll()

Wait for all tasks to be stopped. This is mainly used internally to ensure proper cleanup of internal data structures in test suites.

getType
GType getType()

Variables

gstTask
GstTask* gstTask;

the main Gtk struct

Inherited Members

From ObjectGst

gstObject
GstObject* gstObject;

the main Gtk struct

getObjectGstStruct
GstObject* getObjectGstStruct()

Get the main Gtk struct

getStruct
void* getStruct()

the main Gtk struct as a void*

setStruct
void setStruct(GObject* obj)
Undocumented in source. Be warned that the author may not have intended to support it.
getType
GType getType()
checkUniqueness
bool checkUniqueness(ListG list, string name)

Checks to see if there is any object named @name in @list. This function does not do any locking of any kind. You might want to protect the provided list with the lock of the owner of the list. This function will lock each #GstObject in the list to compare the name, so be careful when passing a list with a locked object.

defaultDeepNotify
void defaultDeepNotify(ObjectG object, ObjectGst orig, ParamSpec pspec, string[] excludedProps)

A default deep_notify signal callback for an object. The user data should contain a pointer to an array of strings that should be excluded from the notify. The default handler will print the new value of the property using g_print.

refSink
void* refSink(void* object)

Increase the reference count of @object, and possibly remove the floating reference, if @object has a floating reference.

replace
bool replace(ObjectGst oldobj, ObjectGst newobj)

Atomically modifies a pointer to point to a new object. The reference count of @oldobj is decreased and the reference count of @newobj is increased.

addControlBinding
bool addControlBinding(ControlBinding binding)

Attach the #GstControlBinding to the object. If there already was a #GstControlBinding for this property it will be replaced.

defaultError
void defaultError(ErrorG error, string dbg)

A default error function that uses g_printerr() to display the error message and the optional debug sting..

getControlBinding
ControlBinding getControlBinding(string propertyName)

Gets the corresponding #GstControlBinding for the property. This should be unreferenced again after use.

getControlRate
GstClockTime getControlRate()

Obtain the control-rate for this @object. Audio processing #GstElement objects will use this rate to sub-divide their processing loop and call gst_object_sync_values() inbetween. The length of the processing segment should be up to @control-rate nanoseconds.

getGValueArray
bool getGValueArray(string propertyName, GstClockTime timestamp, GstClockTime interval, uint nValues, Value values)

Gets a number of #GValues for the given controlled property starting at the requested time. The array @values need to hold enough space for @n_values of #GValue.

getName
string getName()

Returns a copy of the name of @object. Caller should g_free() the return value after usage. For a nameless object, this returns %NULL, which you can safely g_free() as well.

getParent
ObjectGst getParent()

Returns the parent of @object. This function increases the refcount of the parent object so you should gst_object_unref() it after usage.

getPathString
string getPathString()

Generates a string describing the path of @object in the object hierarchy. Only useful (or used) for debugging.

getValue
Value getValue(string propertyName, GstClockTime timestamp)

Gets the value for the given controlled property at the requested time.

getValueArray
bool getValueArray(string propertyName, GstClockTime timestamp, GstClockTime interval, uint nValues, void* values)

Gets a number of values for the given controlled property starting at the requested time. The array @values need to hold enough space for @n_values of the same type as the objects property's type.

hasActiveControlBindings
bool hasActiveControlBindings()

Check if the @object has an active controlled properties.

hasAncestor
bool hasAncestor(ObjectGst ancestor)

Check if @object has an ancestor @ancestor somewhere up in the hierarchy. One can e.g. check if a #GstElement is inside a #GstPipeline.

doref
ObjectGst doref()

Increments the reference count on @object. This function does not take the lock on @object because it relies on atomic refcounting.

removeControlBinding
bool removeControlBinding(ControlBinding binding)

Removes the corresponding #GstControlBinding. If it was the last ref of the binding, it will be disposed.

setControlBindingDisabled
void setControlBindingDisabled(string propertyName, bool disabled)

This function is used to disable the control bindings on a property for some time, i.e. gst_object_sync_values() will do nothing for the property.

setControlBindingsDisabled
void setControlBindingsDisabled(bool disabled)

This function is used to disable all controlled properties of the @object for some time, i.e. gst_object_sync_values() will do nothing.

setControlRate
void setControlRate(GstClockTime controlRate)

Change the control-rate for this @object. Audio processing #GstElement objects will use this rate to sub-divide their processing loop and call gst_object_sync_values() inbetween. The length of the processing segment should be up to @control-rate nanoseconds.

setName
bool setName(string name)

Sets the name of @object, or gives @object a guaranteed unique name (if @name is %NULL). This function makes a copy of the provided name, so the caller retains ownership of the name it sent.

setParent
bool setParent(ObjectGst parent)

Sets the parent of @object to @parent. The object's reference count will be incremented, and any floating reference will be removed (see gst_object_ref_sink()).

suggestNextSync
GstClockTime suggestNextSync()

Returns a suggestion for timestamps where buffers should be split to get best controller results.

syncValues
bool syncValues(GstClockTime timestamp)

Sets the properties of the object, according to the #GstControlSources that (maybe) handle them and for the given timestamp.

unparent
void unparent()

Clear the parent of @object, removing the associated reference. This function decreases the refcount of @object.

unref
void unref()

Decrements the reference count on @object. If reference count hits zero, destroy @object. This function does not take the lock on @object as it relies on atomic refcounting.

connectedSignals
int[string] connectedSignals;
Undocumented in source.
onDeepNotifyListeners
void delegate(ObjectGst, ParamSpec, ObjectGst)[] onDeepNotifyListeners;
Undocumented in source.
addOnDeepNotify
void addOnDeepNotify(void delegate(ObjectGst, ParamSpec, ObjectGst) dlg, ConnectFlags connectFlags)

The deep notify signal is used to be notified of property changes. It is typically attached to the toplevel bin to receive notifications from all the elements contained in that bin.

callBackDeepNotify
void callBackDeepNotify(GstObject* objectgstStruct, GstObject* propObject, GParamSpec* prop, ObjectGst _objectgst)
Undocumented in source. Be warned that the author may not have intended to support it.

Meta