MatchInfo

The g_regex_*() functions implement regular expression pattern matching using syntax and semantics similar to Perl regular expression.

Some functions accept a start_position argument, setting it differs from just passing over a shortened string and setting G_REGEX_MATCH_NOTBOL in the case of a pattern that begins with any kind of lookbehind assertion. For example, consider the pattern "\Biss\B" which finds occurrences of "iss" in the middle of words. ("\B" matches only if the current position in the subject is not a word boundary.) When applied to the string "Mississipi" from the fourth byte, namely "issipi", it does not match, because "\B" is always false at the start of the subject, which is deemed to be a word boundary. However, if the entire string is passed , but with start_position set to 4, it finds the second occurrence of "iss" because it is able to look behind the starting point to discover that it is preceded by a letter.

Note that, unless you set the G_REGEX_RAW flag, all the strings passed to these functions must be encoded in UTF-8. The lengths and the positions inside the strings are in bytes and not in characters, so, for instance, "\xc3\xa0" (i.e. "à") is two bytes long but it is treated as a single character. If you set G_REGEX_RAW the strings can be non-valid UTF-8 strings and a byte is treated as a character, so "\xc3\xa0" is two bytes and two characters long.

When matching a pattern, "\n" matches only against a "\n" character in the string, and "\r" matches only a "\r" character. To match any newline sequence use "\R". This particular group matches either the two-character sequence CR + LF ("\r\n"), or one of the single characters LF (linefeed, U+000A, "\n"), VT vertical tab, U+000B, "\v"), FF (formfeed, U+000C, "\f"), CR (carriage return, U+000D, "\r"), NEL (next line, U+0085), LS (line separator, U+2028), or PS (paragraph separator, U+2029).

The behaviour of the dot, circumflex, and dollar metacharacters are affected by newline characters, the default is to recognize any newline character (the same characters recognized by "\R"). This can be changed with G_REGEX_NEWLINE_CR, G_REGEX_NEWLINE_LF and G_REGEX_NEWLINE_CRLF compile options, and with G_REGEX_MATCH_NEWLINE_ANY, G_REGEX_MATCH_NEWLINE_CR, G_REGEX_MATCH_NEWLINE_LF and G_REGEX_MATCH_NEWLINE_CRLF match options. These settings are also relevant when compiling a pattern if G_REGEX_EXTENDED is set, and an unescaped "#" outside a character class is encountered. This indicates a comment that lasts until after the next newline.

When setting the G_REGEX_JAVASCRIPT_COMPAT flag, pattern syntax and pattern matching is changed to be compatible with the way that regular expressions work in JavaScript. More precisely, a lonely ']' character in the pattern is a syntax error; the '\x' escape only allows 0 to 2 hexadecimal digits, and you must use the '\u' escape sequence with 4 hex digits to specify a unicode codepoint instead of '\x' or 'x{....}'. If '\x' or '\u' are not followed by the specified number of hex digits, they match 'x' and 'u' literally; also '\U' always matches 'U' instead of being an error in the pattern. Finally, pattern matching is modified so that back references to an unset subpattern group produces a match with the empty string instead of an error. See man:pcreapi(3) for more information.

Creating and manipulating the same GRegex structure from different threads is not a problem as GRegex does not modify its internal state between creation and destruction, on the other hand GMatchInfo is not threadsafe.

The regular expressions low-level functionalities are obtained through the excellent PCRE library written by Philip Hazel.

Constructors

this
this(GMatchInfo* gMatchInfo)

Sets our main struct and passes it to the parent class

Destructor

~this
~this()
Undocumented in source.

Members

Functions

doref
MatchInfo doref()

Increases reference count of match_info by 1. Since 2.30

expandReferences
string expandReferences(string stringToExpand)

Returns a new string containing the text in string_to_expand with references and escape sequences expanded. References refer to the last match done with string against regex and have the same syntax used by g_regex_replace(). The string_to_expand must be UTF-8 encoded even if G_REGEX_RAW was passed to g_regex_new(). The backreferences are extracted from the string passed to the match function, so you cannot call this function after freeing the string. match_info may be NULL in which case string_to_expand must not contain references. For instance "foo\n" does not refer to an actual pattern and '\n' merely will be replaced with \n character, while to expand "\0" (whole match) one needs the result of a match. Use g_regex_check_replacement() to find out whether string_to_expand contains references. Since 2.14

fetch
string fetch(int matchNum)

Retrieves the text matching the match_num'th capturing parentheses. 0 is the full text of the match, 1 is the first paren set, 2 the second, and so on. If match_num is a valid sub pattern but it didn't match anything (e.g. sub pattern 1, matching "b" against "(a)?b") then an empty string is returned. If the match was obtained using the DFA algorithm, that is using g_regex_match_all() or g_regex_match_all_full(), the retrieved string is not that of a set of parentheses but that of a matched substring. Substrings are matched in reverse order of length, so 0 is the longest match. The string is fetched from the string passed to the match function, so you cannot call this function after freeing the string. Since 2.14

fetchAll
string[] fetchAll()

Bundles up pointers to each of the matching substrings from a match and stores them in an array of gchar pointers. The first element in the returned array is the match number 0, i.e. the entire matched text. If a sub pattern didn't match anything (e.g. sub pattern 1, matching "b" against "(a)?b") then an empty string is inserted. If the last match was obtained using the DFA algorithm, that is using g_regex_match_all() or g_regex_match_all_full(), the retrieved strings are not that matched by sets of parentheses but that of the matched substring. Substrings are matched in reverse order of length, so the first one is the longest match. The strings are fetched from the string passed to the match function, so you cannot call this function after freeing the string. Since 2.14

fetchNamed
string fetchNamed(string name)

Retrieves the text matching the capturing parentheses named name. If name is a valid sub pattern name but it didn't match anything (e.g. sub pattern "X", matching "b" against "(?P<X>a)?b") then an empty string is returned. The string is fetched from the string passed to the match function, so you cannot call this function after freeing the string. Since 2.14

fetchNamedPos
int fetchNamedPos(string name, int startPos, int endPos)

Retrieves the position in bytes of the capturing parentheses named name. If name is a valid sub pattern name but it didn't match anything (e.g. sub pattern "X", matching "b" against "(?P<X>a)?b") then start_pos and end_pos are set to -1 and TRUE is returned. Since 2.14

fetchPos
int fetchPos(int matchNum, int startPos, int endPos)

Retrieves the position in bytes of the match_num'th capturing parentheses. 0 is the full text of the match, 1 is the first paren set, 2 the second, and so on. If match_num is a valid sub pattern but it didn't match anything (e.g. sub pattern 1, matching "b" against "(a)?b") then start_pos and end_pos are set to -1 and TRUE is returned. If the match was obtained using the DFA algorithm, that is using g_regex_match_all() or g_regex_match_all_full(), the retrieved position is not that of a set of parentheses but that of a matched substring. Substrings are matched in reverse order of length, so 0 is the longest match. Since 2.14

free
void free()

If match_info is not NULL, calls g_match_info_unref(); otherwise does nothing. Since 2.14

getMatchCount
int getMatchCount()

Retrieves the number of matched substrings (including substring 0, that is the whole matched text), so 1 is returned if the pattern has no substrings in it and 0 is returned if the match failed. If the last match was obtained using the DFA algorithm, that is using g_regex_match_all() or g_regex_match_all_full(), the retrieved count is not that of the number of capturing parentheses but that of the number of matched substrings. Since 2.14

getMatchInfoStruct
GMatchInfo* getMatchInfoStruct()

Get the main Gtk struct

getRegex
Regex getRegex()

Returns GRegex object used in match_info. It belongs to Glib and must not be freed. Use g_regex_ref() if you need to keep it after you free match_info object. Since 2.14

getString
string getString()

Returns the string searched with match_info. This is the string passed to g_regex_match() or g_regex_replace() so you may not free it before calling this function. Since 2.14

getStruct
void* getStruct()

the main Gtk struct as a void*

isPartialMatch
int isPartialMatch()

Usually if the string passed to g_regex_match*() matches as far as it goes, but is too short to match the entire pattern, FALSE is returned. There are circumstances where it might be helpful to distinguish this case from other cases in which there is no match. Consider, for example, an application where a human is required to type in data for a field with specific formatting requirements. An example might be a date in the form ddmmmyy, defined by the pattern "^\d?\d(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)\d\d$". If the application sees the user’s keystrokes one by one, and can check that what has been typed so far is potentially valid, it is able to raise an error as soon as a mistake is made. GRegex supports the concept of partial matching by means of the G_REGEX_MATCH_PARTIAL_SOFT and G_REGEX_MATCH_PARTIAL_HARD flags. When they are used, the return code for g_regex_match() or g_regex_match_full() is, as usual, TRUE for a complete match, FALSE otherwise. But, when these functions return FALSE, you can check if the match was partial calling g_match_info_is_partial_match(). The difference between G_REGEX_MATCH_PARTIAL_SOFT and G_REGEX_MATCH_PARTIAL_HARD is that when a partial match is encountered with G_REGEX_MATCH_PARTIAL_SOFT, matching continues to search for a possible complete match, while with G_REGEX_MATCH_PARTIAL_HARD matching stops at the partial match. When both G_REGEX_MATCH_PARTIAL_SOFT and G_REGEX_MATCH_PARTIAL_HARD are set, the latter takes precedence. There were formerly some restrictions on the pattern for partial matching. The restrictions no longer apply. See man:pcrepartial for more information on partial matching. Since 2.14

matches
int matches()

Returns whether the previous match operation succeeded. Since 2.14

next
int next()

Scans for the next match using the same parameters of the previous call to g_regex_match_full() or g_regex_match() that returned match_info. The match is done on the string passed to the match function, so you cannot free it before calling this function. Since 2.14

unref
void unref()

Decreases reference count of match_info by 1. When reference count drops to zero, it frees all the memory associated with the match_info structure. Since 2.30

Variables

gMatchInfo
GMatchInfo* gMatchInfo;

the main Gtk struct

Meta