/*
 * This file is part of gtkD.
 *
 * gtkD is free software; you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License
 * as published by the Free Software Foundation; either version 3
 * of the License, or (at your option) any later version, with
 * some exceptions, please read the COPYING file.
 *
 * gtkD is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with gtkD; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110, USA
 */
 
// generated automatically - do not change
// find conversion definition on APILookup.txt
// implement new conversion functionalities on the wrap.utils pakage

/*
 * Conversion parameters:
 * inFile  = glib-Base64-Encoding.html
 * outPack = glib
 * outFile = Base64
 * strct   = 
 * realStrct=
 * ctorStrct=
 * clss    = Base64
 * interf  = 
 * class Code: No
 * interface Code: No
 * template for:
 * extend  = 
 * implements:
 * prefixes:
 * 	- g_base64_
 * omit structs:
 * omit prefixes:
 * omit code:
 * omit signals:
 * imports:
 * 	- glib.Str
 * structWrap:
 * module aliases:
 * local aliases:
 * overrides:
 */

module glib.Base64;

public  import gtkc.glibtypes;

private import gtkc.glib;
private import glib.ConstructionException;


private import glib.Str;




/**
 * Description
 * Base64 is an encoding that allows a sequence of arbitrary bytes to be
 * encoded as a sequence of printable ASCII characters. For the definition
 * of Base64, see RFC
 * 1421 or RFC
 * 2045. Base64 is most commonly used as a MIME transfer encoding
 * for email.
 * GLib supports incremental encoding using g_base64_encode_step() and
 * g_base64_encode_close(). Incremental decoding can be done with
 * g_base64_decode_step(). To encode or decode data in one go, use
 * g_base64_encode() or g_base64_decode(). To avoid memory allocation when
 * decoding, you can use g_base64_decode_inplace().
 * Support for Base64 encoding has been added in GLib 2.12.
 */
public class Base64
{
	
	/**
	 */
	
	/**
	 * Incrementally encode a sequence of binary data into its Base-64 stringified
	 * representation. By calling this function multiple times you can convert
	 * data in chunks to avoid having to have the full encoded data in memory.
	 * When all of the data has been converted you must call
	 * g_base64_encode_close() to flush the saved state.
	 * The output buffer must be large enough to fit all the data that will
	 * be written to it. Due to the way base64 encodes you will need
	 * at least: (len / 3 + 1) * 4 + 4 bytes (+ 4 may be needed in case of
	 * Since 2.12
	 * Params:
	 * in = the binary data to encode
	 * len = the length of in
	 * breakLines = whether to break long lines
	 * out = pointer to destination buffer
	 * state = Saved state between steps, initialize to 0
	 * save = Saved state between steps, initialize to 0
	 * Returns: The number of bytes of output that was written
	 */
	public static gsize encodeStep(char* inn, gsize len, int breakLines, string f_out, ref int state, ref int save)
	{
		// gsize g_base64_encode_step (const guchar *in,  gsize len,  gboolean break_lines,  gchar *out,  gint *state,  gint *save);
		return g_base64_encode_step(inn, len, breakLines, Str.toStringz(f_out), &state, &save);
	}
	
	/**
	 * Flush the status from a sequence of calls to g_base64_encode_step().
	 * The output buffer must be large enough to fit all the data that will
	 * be written to it. It will need up to 4 bytes, or up to 5 bytes if
	 * line-breaking is enabled.
	 * Since 2.12
	 * Params:
	 * breakLines = whether to break long lines
	 * out = pointer to destination buffer
	 * state = Saved state from g_base64_encode_step()
	 * save = Saved state from g_base64_encode_step()
	 * Returns: The number of bytes of output that was written
	 */
	public static gsize encodeClose(int breakLines, string f_out, ref int state, ref int save)
	{
		// gsize g_base64_encode_close (gboolean break_lines,  gchar *out,  gint *state,  gint *save);
		return g_base64_encode_close(breakLines, Str.toStringz(f_out), &state, &save);
	}
	
	/**
	 * Encode a sequence of binary data into its Base-64 stringified
	 * representation.
	 * Since 2.12
	 * Params:
	 * data = the binary data to encode
	 * len = the length of data
	 * Returns: a newly allocated, zero-terminated Base-64 encoded string representing data. The returned string must be freed with g_free().
	 */
	public static string encode(char* data, gsize len)
	{
		// gchar * g_base64_encode (const guchar *data,  gsize len);
		return Str.toString(g_base64_encode(data, len));
	}
	
	/**
	 * Incrementally decode a sequence of binary data from its Base-64 stringified
	 * representation. By calling this function multiple times you can convert
	 * data in chunks to avoid having to have the full encoded data in memory.
	 * The output buffer must be large enough to fit all the data that will
	 * be written to it. Since base64 encodes 3 bytes in 4 chars you need
	 * at least: (len / 4) * 3 + 3 bytes (+ 3 may be needed in case of non-zero
	 * state).
	 * Since 2.12
	 * Params:
	 * in = binary input data
	 * len = max length of in data to decode
	 * out = output buffer
	 * state = Saved state between steps, initialize to 0
	 * save = Saved state between steps, initialize to 0
	 * Returns: The number of bytes of output that was written
	 */
	public static gsize decodeStep(string inn, gsize len, char* f_out, ref int state, ref uint save)
	{
		// gsize g_base64_decode_step (const gchar *in,  gsize len,  guchar *out,  gint *state,  guint *save);
		return g_base64_decode_step(Str.toStringz(inn), len, f_out, &state, &save);
	}
	
	/**
	 * Decode a sequence of Base-64 encoded text into binary data
	 * Since 2.12
	 * Params:
	 * text = zero-terminated string with base64 text to decode
	 * Returns: a newly allocated buffer containing the binary data that text represents. The returned buffer must be freed with g_free().
	 */
	public static char[] decode(string text)
	{
		// guchar * g_base64_decode (const gchar *text,  gsize *out_len);
		gsize outLen;
		auto p = g_base64_decode(Str.toStringz(text), &outLen);
		
		if(p is null)
		{
			return null;
		}
		
		return p[0 .. outLen];
	}
	
	/**
	 * Decode a sequence of Base-64 encoded text into binary data
	 * by overwriting the input data.
	 * Since 2.20
	 * Params:
	 * text = zero-terminated string with base64 text to decode
	 * Returns: The binary data that text responds. This pointer is the same as the input text.
	 */
	public static char[] decodeInplace(string text)
	{
		// guchar * g_base64_decode_inplace (gchar *text,  gsize *out_len);
		gsize outLen;
		auto p = g_base64_decode_inplace(Str.toStringz(text), &outLen);
		
		if(p is null)
		{
			return null;
		}
		
		return p[0 .. outLen];
	}
}