RecordingSurface

Description A recording surface is a surface that records all drawing operations at the highest level of the surface backend interface, (that is, the level of paint, mask, stroke, fill, and show_text_glyphs). The recording surface can then be "replayed" against any target surface by using it as a source surface. If you want to replay a surface so that the results in target will be identical to the results that would have been obtained if the original operations applied to the recording surface had instead been applied to the target surface, you can use code like this: A recording surface is logically unbounded, i.e. it has no implicit constraint on the size of the drawing surface. However, in practice this is rarely useful as you wish to replay against a particular target surface with known bounds. For this case, it is more efficient to specify the target extents to the recording surface upon creation. The recording phase of the recording surface is careful to snapshot all necessary objects (paths, patterns, etc.), in order to achieve accurate replay. The efficiency of the recording surface could be improved by improving the implementation of snapshot for the various objects. For example, it would be nice to have a copy-on-write implementation for _cairo_surface_snapshot.

Constructors

this
this(cairo_surface_t* cairo_surface)

Sets our main struct and passes it to the parent class

Members

Functions

getRecordingSurfaceStruct
cairo_surface_t* getRecordingSurfaceStruct()
Undocumented in source. Be warned that the author may not have intended to support it.
getStruct
void* getStruct()

the main Gtk struct as a void*

inkExtents
void inkExtents(double* x0, double* y0, double* width, double* height)

Measures the extents of the operations stored within the recording-surface. This is useful to compute the required size of an image surface (or equivalent) into which to replay the full sequence of drawing operations. Since 1.10

Static functions

create
cairo_surface_t* create(cairo_content_t content, cairo_rectangle_t* extents)

Creates a recording-surface which can be used to record all drawing operations at the highest level (that is, the level of paint, mask, stroke, fill and show_text_glyphs). The recording surface can then be "replayed" against any target surface by using it as a source to drawing operations. The recording phase of the recording surface is careful to snapshot all necessary objects (paths, patterns, etc.), in order to achieve accurate replay. Since 1.10

Variables

cairo_surface
cairo_surface_t* cairo_surface;

the main Gtk struct

Inherited Members

From Surface

cairo_surface
cairo_surface_t* cairo_surface;

the main Gtk struct

getSurfaceStruct
cairo_surface_t* getSurfaceStruct()
Undocumented in source. Be warned that the author may not have intended to support it.
getStruct
void* getStruct()

the main Gtk struct as a void*

getMimeData
void getMimeData(string mimeType, ubyte[] data)

Return mime data previously attached to surface using the specified mime type. If no data has been attached with the given mime type, data is set NULL. Since 1.10

createSimilar
Surface createSimilar(cairo_content_t content, int width, int height)

Create a new surface that is as compatible as possible with an existing surface. For example the new surface will have the same fallback resolution and font options as other. Generally, the new surface will also use the same backend as other, unless that is not possible for some reason. The type of the returned surface may be examined with cairo_surface_get_type(). Initially the surface contents are all 0 (transparent if contents have transparency, black otherwise.)

createForRectangle
Surface createForRectangle(double x, double y, double width, double height)

Create a new surface that is a rectangle within the target surface. All operations drawn to this surface are then clipped and translated onto the target surface. Nothing drawn via this sub-surface outside of its bounds is drawn onto the target surface, making this a useful method for passing constrained child surfaces to library routines that draw directly onto the parent surface, i.e. with no further backend allocations, double buffering or copies. Note The semantics of subsurfaces have not been finalized yet unless the rectangle is in full device units, is contained within the extents of the target surface, and the target or subsurface's device transforms are not changed. Since 1.10

reference
Surface reference()

Increases the reference count on surface by one. This prevents surface from being destroyed until a matching call to cairo_surface_destroy() is made. The number of references to a cairo_surface_t can be get using cairo_surface_get_reference_count().

destroy
void destroy()

Decreases the reference count on surface by one. If the result is zero, then surface and all associated resources are freed. See cairo_surface_reference().

status
cairo_status_t status()

Checks whether an error has previously occurred for this surface.

finish
void finish()

This function finishes the surface and drops all references to external resources. For example, for the Xlib backend it means that cairo will no longer access the drawable, which can be freed. After calling cairo_surface_finish() the only valid operations on a surface are getting and setting user, referencing and destroying, and flushing and finishing it. Further drawing to the surface will not affect the surface but will instead trigger a CAIRO_STATUS_SURFACE_FINISHED error. When the last call to cairo_surface_destroy() decreases the reference count to zero, cairo will call cairo_surface_finish() if it hasn't been called already, before freeing the resources associated with the surface.

flush
void flush()

Do any pending drawing for the surface and also restore any temporary modifications cairo has made to the surface's state. This function must be called before switching from drawing on the surface with cairo to drawing on it directly with native APIs. If the surface doesn't support direct access, then this function does nothing.

getDevice
Device getDevice()

This function returns the device for a surface. See cairo_device_t. Since 1.10

getFontOptions
void getFontOptions(FontOption options)

Retrieves the default font rendering options for the surface. This allows display surfaces to report the correct subpixel order for rendering on them, print surfaces to disable hinting of metrics and so forth. The result can then be used with cairo_scaled_font_create().

getContent
cairo_content_t getContent()

This function returns the content type of surface which indicates whether the surface contains color and/or alpha information. See cairo_content_t. Since 1.2

markDirty
void markDirty()

Tells cairo that drawing has been done to surface using means other than cairo, and that cairo should reread any cached areas. Note that you must call cairo_surface_flush() before doing such drawing.

markDirtyRectangle
void markDirtyRectangle(int x, int y, int width, int height)

Like cairo_surface_mark_dirty(), but drawing has been done only to the specified rectangle, so that cairo can retain cached contents for other parts of the surface. Any cached clip set on the surface will be reset by this function, to make sure that future cairo calls have the clip set that they expect.

setDeviceOffset
void setDeviceOffset(double xOffset, double yOffset)

Sets an offset that is added to the device coordinates determined by the CTM when drawing to surface. One use case for this function is when we want to create a cairo_surface_t that redirects drawing for a portion of an onscreen surface to an offscreen surface in a way that is completely invisible to the user of the cairo API. Setting a transformation via cairo_translate() isn't sufficient to do this, since functions like cairo_device_to_user() will expose the hidden offset. Note that the offset affects drawing to the surface as well as using the surface in a source pattern.

getDeviceOffset
void getDeviceOffset(double xOffset, double yOffset)

This function returns the previous device offset set by cairo_surface_set_device_offset(). Since 1.2

setFallbackResolution
void setFallbackResolution(double xPixelsPerInch, double yPixelsPerInch)

Set the horizontal and vertical resolution for image fallbacks. When certain operations aren't supported natively by a backend, cairo will fallback by rendering operations to an image and then overlaying that image onto the output. For backends that are natively vector-oriented, this function can be used to set the resolution used for these image fallbacks, (larger values will result in more detailed images, but also larger file sizes). Some examples of natively vector-oriented backends are the ps, pdf, and svg backends. For backends that are natively raster-oriented, image fallbacks are still possible, but they are always performed at the native device resolution. So this function has no effect on those backends. Note: The fallback resolution only takes effect at the time of completing a page (with cairo_show_page() or cairo_copy_page()) so there is currently no way to have more than one fallback resolution in effect on a single page. The default fallback resoultion is 300 pixels per inch in both dimensions. Since 1.2

getFallbackResolution
void getFallbackResolution(double xPixelsPerInch, double yPixelsPerInch)

This function returns the previous fallback resolution set by cairo_surface_set_fallback_resolution(), or default fallback resolution if never set. Since 1.8

getType
cairo_surface_type_t getType()

This function returns the type of the backend used to create a surface. See cairo_surface_type_t for available types. Since 1.2

getReferenceCount
uint getReferenceCount()

Returns the current reference count of surface. Since 1.4

setUserData
cairo_status_t setUserData(cairo_user_data_key_t* key, void* userData, cairo_destroy_func_t destroy)

Attach user data to surface. To remove user data from a surface, call this function with the key that was used to set it and NULL for data.

getUserData
void* getUserData(cairo_user_data_key_t* key)

Return user data previously attached to surface using the specified key. If no user data has been attached with the given key this function returns NULL.

copyPage
void copyPage()

Emits the current page for backends that support multiple pages, but doesn't clear it, so that the contents of the current page will be retained for the next page. Use cairo_surface_show_page() if you want to get an empty page after the emission. There is a convenience function for this that takes a cairo_t, namely cairo_copy_page(). Since 1.6

showPage
void showPage()

Emits and clears the current page for backends that support multiple pages. Use cairo_surface_copy_page() if you don't want to clear the page. There is a convenience function for this that takes a cairo_t, namely cairo_show_page(). Since 1.6

hasShowTextGlyphs
cairo_bool_t hasShowTextGlyphs()

Returns whether the surface supports sophisticated cairo_show_text_glyphs() operations. That is, whether it actually uses the provided text and cluster data to a cairo_show_text_glyphs() call. Note: Even if this function returns FALSE, a cairo_show_text_glyphs() operation targeted at surface will still succeed. It just will act like a cairo_show_glyphs() operation. Users can use this function to avoid computing UTF-8 text and cluster mapping if the target surface does not use it. Since 1.8

setMimeData
cairo_status_t setMimeData(string mimeType, ubyte[] data, cairo_destroy_func_t destroy, void* closure)

Attach an image in the format mime_type to surface. To remove the data from a surface, call this function with same mime type and NULL for data. The attached image (or filename) data can later be used by backends which support it (currently: PDF, PS, SVG and Win32 Printing surfaces) to emit this data instead of making a snapshot of the surface. This approach tends to be faster and requires less memory and disk space. The recognized MIME types are the following: CAIRO_MIME_TYPE_JPEG, CAIRO_MIME_TYPE_PNG, CAIRO_MIME_TYPE_JP2, CAIRO_MIME_TYPE_URI. See corresponding backend surface docs for details about which MIME types it can handle. Caution: the associated MIME data will be discarded if you draw on the surface afterwards. Use this function with care. Since 1.10

Meta