Sets our main struct and passes it to the parent class.
Creates a new #GtkPrintOperation.
Emitted after the user has finished changing print settings in the dialog, before the actual rendering starts.
Emitted when displaying the print dialog. If you return a widget in a handler for this signal it will be added to a custom tab in the print dialog. You typically return a container widget with multiple widgets in it.
Emitted right before #GtkPrintOperation::begin-print if you added a custom widget in the #GtkPrintOperation::create-custom-widget handler. When you get this signal you should read the information from the custom widgets, as the widgets are not guaraneed to be around at a later time.
Emitted when the print operation run has finished doing everything required for printing.
Emitted for every page that is printed. The signal handler must render the @page_nr's page onto the cairo context obtained from @context using gtk_print_context_get_cairo_context(). |[<!-- language="C" --> static void draw_page (GtkPrintOperation *operation, GtkPrintContext *context, gint page_nr, gpointer user_data) { cairo_t *cr; PangoLayout *layout; gdouble width, text_height; gint layout_height; PangoFontDescription *desc;
Emitted after all pages have been rendered. A handler for this signal can clean up any resources that have been allocated in the #GtkPrintOperation::begin-print handler.
Emitted after the #GtkPrintOperation::begin-print signal, but before the actual rendering starts. It keeps getting emitted until a connected signal handler returns %TRUE.
Gets emitted when a preview is requested from the native dialog.
Emitted once for every page that is printed, to give the application a chance to modify the page setup. Any changes done to @setup will be in force only for printing this page.
Emitted at between the various phases of the print operation. See #GtkPrintStatus for the phases that are being discriminated. Use gtk_print_operation_get_status() to find out the current status.
Emitted after change of selected printer. The actual page setup and print settings are passed to the custom widget, which can actualize itself according to this change.
Cancels a running print operation. This function may be called from a #GtkPrintOperation::begin-print, #GtkPrintOperation::paginate or #GtkPrintOperation::draw-page signal handler to stop the currently running print operation.
Signalize that drawing of particular page is complete.
Returns the default page setup, see gtk_print_operation_set_default_page_setup().
Gets the value of #GtkPrintOperation:embed-page-setup property.
Call this when the result of a print operation is %GTK_PRINT_OPERATION_RESULT_ERROR, either as returned by gtk_print_operation_run(), or in the #GtkPrintOperation::done signal handler. The returned #GError will contain more details on what went wrong.
Gets the value of #GtkPrintOperation:has-selection property.
Returns the number of pages that will be printed.
Get the main Gtk struct
Returns the current print settings.
Returns the status of the print operation. Also see gtk_print_operation_get_status_string().
Returns a string representation of the status of the print operation. The string is translated and suitable for displaying the print status e.g. in a #GtkStatusbar.
the main Gtk struct as a void*
Gets the value of #GtkPrintOperation:support-selection property.
A convenience function to find out if the print operation is finished, either successfully (%GTK_PRINT_STATUS_FINISHED) or unsuccessfully (%GTK_PRINT_STATUS_FINISHED_ABORTED).
Runs the print operation, by first letting the user modify print settings in the print dialog, and then print the document.
Sets whether the gtk_print_operation_run() may return before the print operation is completed. Note that some platforms may not allow asynchronous operation.
Sets the current page.
Sets the label for the tab holding custom widgets.
Makes @default_page_setup the default page setup for @op.
Sets up the #GtkPrintOperation to wait for calling of gtk_print_operation_draw_page_finish() from application. It can be used for drawing page in another thread.
Embed page size combo box and orientation combo box into page setup page. Selected page setup is stored as default page setup in #GtkPrintOperation.
Sets up the #GtkPrintOperation to generate a file instead of showing the print dialog. The indended use of this function is for implementing “Export to PDF” actions. Currently, PDF is the only supported format.
Sets whether there is a selection to print.
Sets the name of the print job. The name is used to identify the job (e.g. in monitoring applications like eggcups).
Sets the number of pages in the document.
Sets the print settings for @op. This is typically used to re-establish print settings from a previous print operation, see gtk_print_operation_run().
If @show_progress is %TRUE, the print operation will show a progress dialog during the print operation.
Sets whether selection is supported by #GtkPrintOperation.
If track_status is %TRUE, the print operation will try to continue report on the status of the print job in the printer queues and printer. This can allow your application to show things like “out of paper” issues, and when the print job actually reaches the printer.
Sets up the transformation for the cairo context obtained from #GtkPrintContext in such a way that distances are measured in units of @unit.
If @full_page is %TRUE, the transformation for the cairo context obtained from #GtkPrintContext puts the origin at the top left corner of the page (which may not be the top left corner of the sheet, depending on page orientation and the number of pages per sheet). Otherwise, the origin is at the top left corner of the imageable area (i.e. inside the margins).
Runs a page setup dialog, letting the user modify the values from @page_setup. If the user cancels the dialog, the returned #GtkPageSetup is identical to the passed in @page_setup, otherwise it contains the modifications done in the dialog.
Runs a page setup dialog, letting the user modify the values from @page_setup.
the main Gtk struct
the main Gtk struct
Get the main Gtk struct
the main Gtk struct as a void*
Gets a D Object from the objects table of associations.
The notify signal is emitted on an object when one of its properties has been changed. Note that getting this signal doesn't guarantee that the value of the property has actually changed, it may also be emitted when the setter for the property is called to reinstate the previous value.
Find the #GParamSpec with the given name for an interface. Generally, the interface vtable passed in as @g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.
Lists the properties of an interface.Generally, the interface vtable passed in as @g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().
Increases the reference count of the object by one and sets a callback to be called when all other references to the object are dropped, or when this is already the last reference to the object and another reference is established.
Adds a weak reference from weak_pointer to @object to indicate that the pointer located at @weak_pointer_location is only valid during the lifetime of @object. When the @object is finalized, @weak_pointer will be set to %NULL.
Creates a binding between @source_property on @source and @target_property on @target. Whenever the @source_property is changed the @target_property is updated using the same value. For instance:
Complete version of g_object_bind_property().
Creates a binding between @source_property on @source and @target_property on @target, allowing you to set the transformation functions to be used by the binding.
This is a variant of g_object_get_data() which returns a 'duplicate' of the value. @dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object.
This is a variant of g_object_get_qdata() which returns a 'duplicate' of the value. @dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object.
This function is intended for #GObject implementations to re-enforce a floating[floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().
Increases the freeze count on @object. If the freeze count is non-zero, the emission of "notify" signals on @object is stopped. The signals are queued until the freeze count is decreased to zero. Duplicate notifications are squashed so that at most one #GObject::notify signal is emitted for each property modified while the object is frozen.
Gets a named field from the objects table of associations (see g_object_set_data()).
Gets a property of an object.
This function gets back user data pointers stored via g_object_set_qdata().
Gets properties of an object.
Gets @n_properties properties for an @object. Obtained properties will be set to @values. All properties must be valid. Warnings will be emitted and undefined behaviour may result if invalid properties are passed in.
Checks whether @object has a floating[floating-ref] reference.
Emits a "notify" signal for the property @property_name on @object.
Emits a "notify" signal for the property specified by @pspec on @object.
Increases the reference count of @object.
Increase the reference count of @object, and possibly remove the floating[floating-ref] reference, if @object has a floating reference.
Removes a reference added with g_object_add_toggle_ref(). The reference count of the object is decreased by one.
Removes a weak reference from @object that was previously added using g_object_add_weak_pointer(). The @weak_pointer_location has to match the one used with g_object_add_weak_pointer().
Compares the user data for the key @key on @object with @oldval, and if they are the same, replaces @oldval with @newval.
Compares the user data for the key @quark on @object with @oldval, and if they are the same, replaces @oldval with @newval.
Releases all references to other objects. This can be used to break reference cycles.
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
Like g_object_set_data() except it adds notification for when the association is destroyed, either by setting it to a different value or when the object is destroyed.
Sets a property on an object.
This sets an opaque, named pointer on an object. The name is specified through a #GQuark (retrived e.g. via g_quark_from_static_string()), and the pointer can be gotten back from the @object with g_object_get_qdata() until the @object is finalized. Setting a previously set user data pointer, overrides (frees) the old pointer set, using #NULL as pointer essentially removes the data stored.
This function works like g_object_set_qdata(), but in addition, a void (*destroy) (gpointer) function may be specified which is called with @data as argument when the @object is finalized, or the data is being overwritten by a call to g_object_set_qdata() with the same @quark.
Sets properties on an object.
Sets @n_properties properties for an @object. Properties to be set will be taken from @values. All properties must be valid. Warnings will be emitted and undefined behaviour may result if invalid properties are passed in.
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
This function gets back user data pointers stored via g_object_set_qdata() and removes the @data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update user data pointers with a destroy notifier, for example: |[<!-- language="C" --> void object_add_to_user_list (GObject *object, const gchar *new_string) { // the quark, naming the object data GQuark quark_string_list = g_quark_from_static_string ("my-string-list"); // retrive the old string list GList *list = g_object_steal_qdata (object, quark_string_list);
Reverts the effect of a previous call to g_object_freeze_notify(). The freeze count is decreased on @object and when it reaches zero, queued "notify" signals are emitted.
Decreases the reference count of @object. When its reference count drops to 0, the object is finalized (i.e. its memory is freed).
This function essentially limits the life time of the @closure to the life time of the object. That is, when the object is finalized, the @closure is invalidated by calling g_closure_invalidate() on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, g_object_ref() and g_object_unref() are added as marshal guards to the @closure, to ensure that an extra reference count is held on @object during invocation of the @closure. Usually, this function will be called on closures that use this @object as closure data.
Adds a weak reference callback to an object. Weak references are used for notification when an object is finalized. They are called "weak references" because they allow you to safely hold a pointer to an object without calling g_object_ref() (g_object_ref() adds a strong reference, that is, forces the object to stay alive).
Removes a weak reference callback to an object.
Clears a reference to a #GObject.
Get the main Gtk struct
the main Gtk struct as a void*
Ends a preview.
Returns whether the given page is included in the set of pages that have been selected for printing.
Renders a page to the preview, using the print context that was passed to the #GtkPrintOperation::preview handler together with @preview.
The ::got-page-size signal is emitted once for each page that gets rendered to the preview.
The ::ready signal gets emitted once per preview operation, before the first page is rendered.
GtkPrintOperation is the high-level, portable printing API. It looks a bit different than other GTK+ dialogs such as the #GtkFileChooser, since some platforms don’t expose enough infrastructure to implement a good print dialog. On such platforms, GtkPrintOperation uses the native print dialog. On platforms which do not provide a native print dialog, GTK+ uses its own, see #GtkPrintUnixDialog.
The typical way to use the high-level printing API is to create a GtkPrintOperation object with gtk_print_operation_new() when the user selects to print. Then you set some properties on it, e.g. the page size, any #GtkPrintSettings from previous print operations, the number of pages, the current page, etc.
Then you start the print operation by calling gtk_print_operation_run(). It will then show a dialog, let the user select a printer and options. When the user finished the dialog various signals will be emitted on the #GtkPrintOperation, the main one being #GtkPrintOperation::draw-page, which you are supposed to catch and render the page on the provided #GtkPrintContext using Cairo.
The high-level printing API
|[<!-- language="C" --> static GtkPrintSettings *settings = NULL;
static void do_print (void) { GtkPrintOperation *print; GtkPrintOperationResult res;
print = gtk_print_operation_new ();
if (settings != NULL) gtk_print_operation_set_print_settings (print, settings);
g_signal_connect (print, "begin_print", G_CALLBACK (begin_print), NULL); g_signal_connect (print, "draw_page", G_CALLBACK (draw_page), NULL);
res = gtk_print_operation_run (print, GTK_PRINT_OPERATION_ACTION_PRINT_DIALOG, GTK_WINDOW (main_window), NULL);
if (res == GTK_PRINT_OPERATION_RESULT_APPLY) { if (settings != NULL) g_object_unref (settings); settings = g_object_ref (gtk_print_operation_get_print_settings (print)); }
g_object_unref (print); } ]|
By default GtkPrintOperation uses an external application to do print preview. To implement a custom print preview, an application must connect to the preview signal. The functions gtk_print_operation_preview_render_page(), gtk_print_operation_preview_end_preview() and gtk_print_operation_preview_is_selected() are useful when implementing a print preview.