Sets our main struct and passes it to the parent class
The ::commit signal is emitted when a complete input sequence has been entered by the user. This can be a single character immediately after a key press or the final result of preediting.
The ::delete-surrounding signal is emitted when the input method needs to delete all or part of the context surrounding the cursor. TRUE if the signal was handled.
The ::preedit-changed signal is emitted whenever the preedit sequence currently being entered has changed. It is also emitted at the end of a preedit sequence, in which case gtk_im_context_get_preedit_string() returns the empty string.
The ::preedit-end signal is emitted when a preediting sequence has been completed or canceled.
The ::preedit-start signal is emitted when a new preediting sequence starts.
The ::retrieve-surrounding signal is emitted when the input method requires the context surrounding the cursor. The callback should set the input method surrounding context by calling the gtk_im_context_set_surrounding() method. TRUE if the signal was handled.
Asks the widget that the input context is attached to to delete characters around the cursor position by emitting the GtkIMContext::delete_surrounding signal. Note that offset and n_chars are in characters not in bytes which differs from the usage other places in GtkIMContext. In order to use this function, you should first call gtk_im_context_get_surrounding() to get the current context, and call this function immediately afterwards to make sure that you know what you are deleting. You should also account for the fact that even if the signal was handled, the input context might not have deleted all the characters that were requested to be deleted. This function is used by an input method that wants to make subsitutions in the existing text in response to new input. It is not useful for applications.
Allow an input method to internally handle key press and release events. If this function returns TRUE, then no further processing should be done for this key event.
Notify the input method that the widget to which this input context corresponds has gained focus. The input method may, for example, change the displayed feedback to reflect this change.
Notify the input method that the widget to which this input context corresponds has lost focus. The input method may, for example, change the displayed feedback or reset the contexts state to reflect this change.
Retrieve the current preedit string for the input context, and a list of attributes to apply to the string. This string should be displayed inserted at the insertion point.
the main Gtk struct as a void*
Retrieves context around the insertion point. Input methods typically want context in order to constrain input text based on existing text; this is important for languages such as Thai where only some sequences of characters are allowed. This function is implemented by emitting the GtkIMContext::retrieve_surrounding signal on the input method; in response to this signal, a widget should provide as much context as is available, up to an entire paragraph, by calling gtk_im_context_set_surrounding(). Note that there is no obligation for a widget to respond to the ::retrieve_surrounding signal, so input methods must be prepared to function without context.
Notify the input method that a change such as a change in cursor position has been made. This will typically cause the input method to clear the preedit state.
Set the client window for the input context; this is the GdkWindow in which the input appears. This window is used in order to correctly position status windows, and may also be used for purposes internal to the input method.
Notify the input method that a change in cursor position has been made. The location is relative to the client window.
Sets surrounding context around the insertion point and preedit string. This function is expected to be called in response to the GtkIMContext::retrieve_surrounding signal, and will likely have no effect if called at other times.
Sets whether the IM context should use the preedit string to display feedback. If use_preedit is FALSE (default is TRUE), then the IM context may use some other method to display feedback, such as displaying it in a child of the root window.
the main Gtk struct
the main Gtk struct
the main Gtk struct as a void*
Gets a D Object from the objects table of associations.
The notify signal is emitted on an object when one of its properties has been changed. Note that getting this signal doesn't guarantee that the value of the property has actually changed, it may also be emitted when the setter for the property is called to reinstate the previous value. This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the It is important to note that you must use canonical parameter names as detail strings for the notify signal. See Also GParamSpecObject, g_param_spec_object()
Installs a new property. This is usually done in the class initializer. Note that it is possible to redefine a property in a derived class, by installing a property with the same name. This can be useful at times, e.g. to change the range of allowed values or the default value.
Installs new properties from an array of GParamSpecs. This is usually done in the class initializer. The property id of each property is the index of each GParamSpec in the pspecs array. The property id of 0 is treated specially by GObject and it should not be used to store a GParamSpec. This function should be used if you plan to use a static array of GParamSpecs and g_object_notify_by_pspec(). For instance, this Since 2.26
Looks up the GParamSpec for a property of a class.
Get an array of GParamSpec* for all properties of a class.
Registers property_id as referring to a property with the name name in a parent class or in an interface implemented by oclass. This allows this class to override a property implementation in a parent class or to provide the implementation of a property from an interface. Note Internally, overriding is implemented by creating a property of type GParamSpecOverride; generally operations that query the properties of the object class, such as g_object_class_find_property() or g_object_class_list_properties() will return the overridden property. However, in one case, the construct_properties argument of the constructor virtual function, the GParamSpecOverride is passed instead, so that the param_id field of the GParamSpec will be correct. For virtually all uses, this makes no difference. If you need to get the overridden property, you can call g_param_spec_get_redirect_target(). Since 2.4
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property. This function is meant to be called from the interface's default vtable initialization function (the class_init member of GTypeInfo.) It must not be called after after class_init has been called for any object types implementing this interface. Since 2.4
Find the GParamSpec with the given name for an interface. Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek(). Since 2.4
Lists the properties of an interface.Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek(). Since 2.4
Increases the reference count of object.
Decreases the reference count of object. When its reference count drops to 0, the object is finalized (i.e. its memory is freed).
Increase the reference count of object, and possibly remove the floating reference, if object has a floating reference. In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one. Since 2.10
Clears a reference to a GObject. object_ptr must not be NULL. If the reference is NULL then this function does nothing. Otherwise, the reference count of the object is decreased and the pointer is set to NULL. This function is threadsafe and modifies the pointer atomically, using memory barriers where needed. A macro is also included that allows this function to be used without pointer casts. Since 2.28
Checks whether object has a floating reference. Since 2.10
This function is intended for GObject implementations to re-enforce a floating object reference. Doing this is seldomly required: all GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink(). Since 2.10
Adds a weak reference callback to an object. Weak references are used for notification when an object is finalized. They are called "weak references" because they allow you to safely hold a pointer to an object without calling g_object_ref() (g_object_ref() adds a strong reference, that is, forces the object to stay alive).
Removes a weak reference callback to an object.
Adds a weak reference from weak_pointer to object to indicate that the pointer located at weak_pointer_location is only valid during the lifetime of object. When the object is finalized, weak_pointer will be set to NULL.
Removes a weak reference from object that was previously added using g_object_add_weak_pointer(). The weak_pointer_location has to match the one used with g_object_add_weak_pointer().
Increases the reference count of the object by one and sets a callback to be called when all other references to the object are dropped, or when this is already the last reference to the object and another reference is established. This functionality is intended for binding object to a proxy object managed by another memory manager. This is done with two paired references: the strong reference added by g_object_add_toggle_ref() and a reverse reference to the proxy object which is either a strong reference or weak reference. The setup is that when there are no other references to object, only a weak reference is held in the reverse direction from object to the proxy object, but when there are other references held to object, a strong reference is held. The notify callback is called when the reference from object to the proxy object should be toggled from strong to weak (is_last_ref true) or weak to strong (is_last_ref false). Since a (normal) reference must be held to the object before calling g_object_toggle_ref(), the initial state of the reverse link is always strong. Multiple toggle references may be added to the same gobject, however if there are multiple toggle references to an object, none of them will ever be notified until all but one are removed. For this reason, you should only ever use a toggle reference if there is important state in the proxy object. Since 2.8
Removes a reference added with g_object_add_toggle_ref(). The reference count of the object is decreased by one. Since 2.8
Emits a "notify" signal for the property property_name on object. When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Emits a "notify" signal for the property specified by pspec on object. This function omits the property name lookup, hence it is faster than g_object_notify(). One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with Since 2.26
Increases the freeze count on object. If the freeze count is non-zero, the emission of "notify" signals on object is stopped. The signals are queued until the freeze count is decreased to zero. This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Reverts the effect of a previous call to g_object_freeze_notify(). The freeze count is decreased on object and when it reaches zero, all queued "notify" signals are emitted. It is an error to call this function when the freeze count is zero.
Gets a named field from the objects table of associations (see g_object_set_data()).
Each object carries around a table of associations from strings to pointers. This function lets you set an association. If the object already had an association with that name, the old association will be destroyed.
Like g_object_set_data() except it adds notification for when the association is destroyed, either by setting it to a different value or when the object is destroyed. Note that the destroy callback is not called if data is NULL.
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
This function gets back user data pointers stored via g_object_set_qdata().
This sets an opaque, named pointer on an object. The name is specified through a GQuark (retrived e.g. via g_quark_from_static_string()), and the pointer can be gotten back from the object with g_object_get_qdata() until the object is finalized. Setting a previously set user data pointer, overrides (frees) the old pointer set, using NULL as pointer essentially removes the data stored.
This function works like g_object_set_qdata(), but in addition, a void (*destroy) (gpointer) function may be specified which is called with data as argument when the object is finalized, or the data is being overwritten by a call to g_object_set_qdata() with the same quark.
This function gets back user data pointers stored via g_object_set_qdata() and removes the data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update
Sets a property on an object.
Gets a property of an object. value must have been initialized to the expected type of the property (or a type to which the expected type can be transformed) using g_value_init(). In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset(). Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
Sets properties on an object.
Gets properties of an object. In general, a copy is made of the property contents and the caller is responsible for freeing the memory in the appropriate manner for the type, for instance by calling g_free() or g_object_unref(). See g_object_get().
This function essentially limits the life time of the closure to the life time of the object. That is, when the object is finalized, the closure is invalidated by calling g_closure_invalidate() on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, g_object_ref() and g_object_unref() are added as marshal guards to the closure, to ensure that an extra reference count is held on object during invocation of the closure. Usually, this function will be called on closures that use this object as closure data.
Releases all references to other objects. This can be used to break reference cycles. This functions should only be called from object system implementations.
Description GtkIMContext defines the interface for GTK+ input methods. An input method is used by GTK+ text input widgets like GtkEntry to map from key events to Unicode character strings. The user may change the current input method via a context menu, unless the "gtk-show-input-method-menu" GtkSettings property is set to FALSE. The default input method can be set programmatically via the "gtk-im-module" GtkSettings property. Alternatively, you may set the GTK_IM_MODULE environment variable as documented in gtk-running. The GtkEntry "im-module" and GtkTextView "im-module" properties may also be used to set input methods for specific widget instances. For instance, a certain entry widget might be expected to contain certain characters which would be easier to input with a certain input method. An input method may consume multiple key events in sequence and finally output the composed result. This is called preediting, and an input method may provide feedback about this process by displaying the intermediate composition states as preedit text. For instance, the default GTK+ input method implements the input of arbitrary Unicode code points by holding down the Control and Shift keys and then typing "U" followed by the hexadecimal digits of the code point. When releasing the Control and Shift keys, preediting ends and the character is inserted as text. Ctrl+Shift+u20AC for example results in the € sign. Additional input methods can be made available for use by GTK+ widgets as loadable modules. An input method module is a small shared library which implements a subclass of GtkIMContext or GtkIMContextSimple and exports these four functions: This function should register the GType of the GtkIMContext subclass which implements the input method by means of g_type_module_register_type(). Note that g_type_register_static() cannot be used as the type needs to be registered dynamically. Here goes any cleanup code your input method might require on module unload. This function returns the list of input methods provided by the module. The example implementation above shows a common solution and simply returns a pointer to statically defined array of GtkIMContextInfo items for each provided input method. This function should return a pointer to a newly created instance of the GtkIMContext subclass identified by context_id. The context ID is the same as specified in the GtkIMContextInfo array returned by im_module_list(). After a new loadable input method module has been installed on the system, the configuration file gtk.immodules needs to be regenerated by gtk-query-immodules-2.0, in order for the new input method to become available to GTK+ applications.